Ecu pin out diagram
As above I'm after the 1997 uk2000 ecu pin outs I have the 3 yellow multi plugs with the 8s ecu
|
What are you thinking of doing lol cause it probably won't work you may expand a bit :thumb:
|
Subaru say the immobilizer isn't part of the ecu.They say it's hard wired seperate to the ecu but so far the wires I've traced look like it does go to the ecu which throws my theory out of the window because I've literally had an email from Andy carr say that the ecu is key coded and he carnt by pass it. So is an aftermarket ecu going to do the job because I carnt find the right reciever so far.i don't want to buy an aftermarket ecu and still be in the same situation
|
Aftermarket ecu should cause you no problems its only aftermarket alarms that should/would need to be bypassed. You should be able to fit a JDM ecu and swap cam and crank sensor and move the fuel pump pin. The only problem with that is v3/4 aren't mappable so you would need an ESL board so your back at square one.
|
I'm not bothered as long as it runs lol
|
Also arnt Jdm ecus set up to run on td05 turbos On the early classics
|
V3/4 are usually vf23 vf24 and tdo4 for uk spec iirc
|
And is there a pin out of some sort so I no what wires go where
|
Don Clark is your man their I have them somewhere in this computer but I only really deal with JDM stuff i'll look about in here and see can I find the two iirc there's a few mappers sites have the two JDM and UK.
|
Originally Posted by 1509joe
(Post 12022521)
Don Clark is your man their I have them somewhere in this computer but I only really deal with JDM stuff i'll look about in here and see can I find the two iirc there's a few mappers sites have the two JDM and UK.
|
|
Originally Posted by ossett2k2
(Post 12022523)
|
|
Originally Posted by ossett2k2
(Post 12022523)
|
The jdm my97 are 1s for wrx and 6s for the sti
|
Originally Posted by 1509joe
(Post 12022526)
It's missing on Simons site AFP site is finished I think.
|
Originally Posted by Rick2017
(Post 12022522)
what ecu am I looking for ? Z4?
|
Originally Posted by ossett2k2
(Post 12022528)
I can open Simon's web site,must be on my cache
|
Originally Posted by ossett2k2
(Post 12022528)
I can open Simon's web site,must be on my cache
|
Originally Posted by Rick2017
(Post 12022530)
I can open the endura site
|
Found it i'll try and upload it :thumb:
|
Originally Posted by 1509joe
(Post 12022531)
I can open it but the 97/98 pinouts are missing :confused:
|
No its a pdf document if you pm me your email address i'll forward it on to you.
|
Originally Posted by 1509joe
(Post 12022535)
No its a pdf document if you pm me your email address i'll forward it on to you.
|
Originally Posted by ossett2k2
(Post 12022536)
It's on the esl link :thumb:
|
I carnt find a v3/v4 jdm ecu on eBay at all :(
|
Have a couple here but there 6s ecu's what turbo have you a td04 for these are for vf23. Probably no cases either due to going aftermarket but your case would do.
|
Another thing what colour are your injectors?
|
Originally Posted by 1509joe
(Post 12022551)
Another thing what colour are your injectors?
|
You'd be needing 440cc yellow phase 1.5 injectors then probably have a set here and what maf have you?
|
All times are GMT +1. The time now is 04:29 PM. |
© 2024 MH Sub I, LLC dba Internet Brands