Will This Work on a Classic? SSM Lead
Has anyone tried this on a v4 classic jdm sti ?
I have a 16pin plug, but no obd software will read it. The seller is not 100% sure, but thinks it might https://mesg.ebay.co.uk/mesgweb/View...l/100598581491 |
Address not working but I can near enough guarantee no.
|
|
Will read a few parameters that's about it v3 v4 are unmappable. v5 v6 you can do more with ecutek etc. Under the steering wheel you go to access codes. :thumb:
|
If you just need a diagnostic machine eBay cheap one will do the job. That's what I have.
|
Originally Posted by jaygsi
(Post 12015949)
If you just need a diagnostic machine eBay cheap one will do the job. That's what I have.
What machine and what year is your car? Only cheap ebay ones I can see are for obd2 |
Originally Posted by Pugtk
(Post 12015954)
What machine and what year is your car?
Only cheap ebay ones I can see are for obd2 |
Originally Posted by 1509joe
(Post 12015995)
Won't work don't waste your money. As said previously v5 onwards. Diagnostic plugs under the wheel or and SSM.
As per the link its advertised its an ssm lead and software. |
Originally Posted by Pugtk
(Post 12016005)
I know OBD2 wont work on the older cars
As per the link its advertised its an ssm lead and software. Read and clear current and history fault codes, both generic and manufacturer specific View real time data from on-board sensors Carry out system tests to different components and sensors Compatible with all Subaru engine and transmission modules from 1999 - 2010 |
I have already messaged him and he seems to think it will work on older cars with the 16 pin plug.
But Im not so sure. Has anyone a link to something that will definitely work and is reasonably priced |
Originally Posted by Pugtk
(Post 12016144)
I have already messaged him and he seems to think it will work on older cars with the 16 pin plug.
But Im not so sure. Has anyone a link to something that will definitely work and is reasonably priced have you tried evoscan, im not sure weather you just want to log parameters but give these a look http://www.evoscan.com/mitsubishi-su...bd2-can-cables. |
Originally Posted by Pugtk
(Post 12016144)
I have already messaged him and he seems to think it will work on older cars with the 16 pin plug.
But Im not so sure. Has anyone a link to something that will definitely work and is reasonably priced |
All times are GMT +1. The time now is 02:27 PM. |
© 2024 MH Sub I, LLC dba Internet Brands