Rotated GT30 Oil Feed
I'm currently fitting a rotated GT3076R to my JDM bugeye (EJ207 with big port heads), does anyone know which oil line to do i need to fit up to the turbo? Do I need to replace the avcs hard line as well and do I need some kind of oil restrictor for the turbo?
Thanks |
https://www.scoobynet.com/general-te...e-fitting.html
Mine was not rotated but i had isues getting threads to match up, Pretty sure the SC42/46 use similar core to gt30 :) |
I spoke to icp and they got one made up for me to the length I wanted to connect onto the Avcs hard line and the correct oil restrictor banjo bolt.
|
I think it was a 1mm restrictor
|
Originally Posted by imprezagaz
(Post 12009623)
I think it was a 1mm restrictor
|
Thanks for the advice lads, I'll grab a 1mm restrictor for the oil feed.
Finished putting the rotated up-pipe and down pipe yesterday, unfortunately the avcs pipe hits the mounting bracket on the the uppipe so I'm going to have to swap the whole line out for a braided part. Has anyone got this fitted: https://www.advancedautomotives.com/...-06-5342-p.asp And if so, will the oil line to the turbo be suitable for the GT30? Cheers Ben |
All times are GMT +1. The time now is 03:28 AM. |
© 2024 MH Sub I, LLC dba Internet Brands