ScoobyNet.com - Subaru Enthusiast Forum - Guide on bleeding clutch

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)

- General Technical (https://www.scoobynet.com/general-technical-10/)

- - Guide on bleeding clutch (https://www.scoobynet.com/general-technical-10/1053037-guide-on-bleeding-clutch.html)

seanvx

25 February 2018 04:11 PM

Guide on bleeding clutch

Hi is there a guide on bleeding clutch on a blob sti , I want to fit a braided clutch line thanks

The Rig

27 February 2018 01:51 PM

No Guide but all i did was remove TMIC, connect hose to the slave cylinder bleed nipple and bleed like you would the brakes, someone presses clutch pedal down 2 or 3 times, open the bleed nipple, ( with pedal still pressed down ) , tighten the nipple, then the other person pulls the clutch pedal back from the floor and repeats ( mine never used to spring back up once i bled, until pulled up )

TECHNOPUG

27 February 2018 04:53 PM

There are 2 bleed nipples IIRC.

Don Clark

27 February 2018 04:55 PM

Quote:

Originally Posted by seanvx (Post 11997411)

Hi is there a guide on bleeding clutch on a blob sti , I want to fit a braided clutch line thanks

By the book

http://clarkdh.net23.net/NTL/Clutch%...eplacement.PNG

http://clarkdh.net23.net/NTL/Clutch%...0bleeding1.PNG
http://clarkdh.net23.net/NTL/Clutch%...0bleeding2.PNG

All times are GMT +1. The time now is 06:13 PM.