Are you editing the logs before you post them up? You last log file jumps from 100kms @2600rpm down to 54 the jumps back to 116?
Also try logging less parameters as it slows down the sample rate and you're logging stuff you don't need to. |
Hi guys just an update, ive thrown in a vf23, exedy lightweight flywheel and an exedy pink clutch.
need to get around to throwing my fmic but right now im running the stock vf23 map, and ive richened the afr a little on the top end. Sorry for the retarded previous logs. I will only post unclipped logs now. |
on the lightweight flywheel you may have to bring the fuel in a little sooner when coasting down. there's a table for it so if you find the car stalling coming up to junctions then try bringing the fuel in a few hundred RPM sooner and it should help.
|
180ish miles on the clutch now. My wideband seems to be failing :(. Need to get the fmic hooked on still.
Few more bedding in miles then can drive a lil harder. |
Have you tried a free air calibration with the wideband?
|
Originally Posted by ossett2k2
(Post 11974252)
Have you tried a free air calibration with the wideband?
|
How new is the sensor?
iirc you are running the wideband in the narrowband location just after the turbo? I was told they die faster there,I have mine lower down,lasted ages and would probably still be going strong if I'd not smashed into the wires while I was under the car! |
Originally Posted by ossett2k2
(Post 11974252)
Have you tried a free air calibration with the wideband?
|
I had a flange welded on the new downpipe, although the welder put that spike remover on the battery, im blaming it on the welding.
I will also get a bosch 17025 which is the bosch lsu 4.9 part no this will cost 78ish quid and come with 1 year guarantee. |
Nice one,where you buying the lsu4.9 from? I need one as well,I didn't think you would get a warranty with an o2 sensor.
|
Can get one from eurocarparts via my mechanic friend (80ish).
Or from amazon https://www.amazon.co.uk/dp/B00BL6M5T6 Or save a few more buck from flubit (basically amazon aswell) https://flubit.com/shop/p/FLJZYWYY4?utm_source=Google&utm_medium=shopping&ut m_campaign=Lab%20%20%7C%20Shopping%20%7C%20No%20Ne gatives&gclid=CjwKCAjwssvPBRBBEiwASFoVdza9K7YCMSvs J29c2pZWQezpfJvolsQGGM1glfq-Bg42csVnHZnX7BoCXmYQAvD_BwE Obviously aem will deny its the same sensor, but people use this and have said its a slightly higher quality compared to the aem. Last thing is do u need a 4.9 or 4.2 |
These all comes with 1 year warantee and they can give it but aem or innovate cant. Its quite annoying.
|
Cheers for the links :thumb:
Yeh I remember reading they don't warranty the sensor with my innovate,I'm after a 4.9 but not in a rush so will look out for a deal if I can get one. |
Doubt ur getting is cheaper than 70ish my brother!
|
Okay guys ive been sick in bed, i redone the richened out sti map for vf23 from this
https://cimg0.ibsrv.net/gimg/www.sco...abef64af69.jpg And https://cimg3.ibsrv.net/gimg/www.sco...03e96e370.jpeg |
Into
https://cimg4.ibsrv.net/gimg/www.sco...79d23b1ef.jpeg And https://cimg5.ibsrv.net/gimg/www.sco...72bfc4869.jpeg Hows it looking to the vets. This is all at stock boost 1.08 bar, wrx intercooler (fmic going on through) Assuming fullboost at 2800-3.3k and pq torque at 4kish |
Sounds like the map I need.
|
Originally Posted by jaygsi
(Post 11974646)
Sounds like the map I need.
|
it can look the best but you won't know for sure until you run it on the car and make some logs. If you want to post the whole map file with some logs I'll have a look over?
|
Lappy on charge, because my wideband is taking a dump on me, i just tried to richen everything up and pull timing to keep everything at 28 degrees high load high rpm, ill get the map over for u
|
As for logs, this map was just something i kind of imagined up today in bed aftet being told by a friend of a mapper that jdm sti tunes are just time bombs waiting to go bang.
Dont have any logs yet so ill just be going by feel untill i can fork out for a new wideband. Its ok cause the clutch is still bedding in :D |
|
for what it's worth, best place i've found for sensors is:
https://www.fuelperformance.co.uk/ Fantastic service, top speed delivery i've ordered stuph at 2am and it's been in the post at 7 the next morning the dood doesn't f**k about. Ossett - consider going for the LSU 4.2 sensor and cable, they will take a lot more of a kicking than the 4.9's your innovate should be able to switch between the two using the LMprogrammer software. hamzi95 - you have a log to go with this supermap? |
Originally Posted by bludgod
(Post 11975288)
for what it's worth, best place i've found for sensors is:
https://www.fuelperformance.co.uk/ Fantastic service, top speed delivery i've ordered stuph at 2am and it's been in the post at 7 the next morning the dood doesn't f**k about. Ossett - consider going for the LSU 4.2 sensor and cable, they will take a lot more of a kicking than the 4.9's your innovate should be able to switch between the two using the LMprogrammer software. hamzi95 - you have a log to go with this supermap? When i get some money, gonna get a 4.9 with warantee and get my hands on a phormula ks3 |
don't kid yourself into thinking that "with warranty" will result in a free sensor, there's no chance of anyone covering you for a new sensor as it will be "oil contaminated" or "user error" or "water damage" etc. just accept that the sensor needs to be cared for and babied and eventually replaced.
what is the full spec of your car anyway? |
If its brought through euro pretty much sure they will cover, especially when brought via a garage.
There was no oil on this one, there was the finest layer of black soot but thats normal i think. U need to realise i had this sensor installed for less than 1k miles. Was installed at the correct angle further down the downpipe. With the supplied bung. It was fine untill i got the welding done. I just want my sensor to last 1 year. Spec V4 uk heads V5/6 bottom mated with cometic gaskets. Exedy pink box and lightweight flywheel. Hks hi power ti exhaust system with 3" decat. Mated to a vf23 which is mated to syms teams racing 4-2-1 headers (one peice design) Kn cone filter, orange maf, 3 port boost solenoid. Aem xseries uego alongside a esl ecu. Thats everything as far as engine wise. |
no fuel pump? really it doesn't matter if you've done 5 miles or 50'000 miles I can't see there ever being a warranty claim on it unless it's DOA but maybe you'll be lucky!
|
Got yellow 440s and a rcm 340lph. 😣 i forgot to mention
|
Thanks @ bludgod :thumb:
My innovate does run both 4.2 & 4.9 so I will look at getting the 4.2 this time. |
so latest issue.
my baro pressure is reading 2bar with engine off or on dosent move. before the clutch swap this was fine. ive swapped the map sensor and the other thing (barrel looking thing with two vac ports :/) with spares. i also rechecked all vac hoses for any leaks. weird thing is. it even reads 2 bar with both sensors disconnected. if i disconnect the map sensor when the engine is running it stalls and i get a CEL. did i fry something in the ecu during the clutch/turbo swap :/? checked connectors for rust and frayed cables but all good! |
All times are GMT +1. The time now is 02:32 PM. |
© 2024 MH Sub I, LLC dba Internet Brands