best replacement dumpvalve for FMIC mounted 425bhp STi?
So I'm fully aware this topic will have been posted hundreds of times on here about dumpvalves, but I need some advice.
My car has an HKS SSQV dump valve attached to the front mounted intercooler piper work of my ej25 hawk sti. The valve has developed a leak so needs replacing. Whats the best quality valves I can use to handle the increased boost my car puts out? Was looking at the recirculating valves but don't want to mess the tune up I have on the car? After a valve that's quiet, not into the chavvy whoosh sounds. Cheers Lewis |
Can't you just replace the seals, it's only 2 rubber o rings?
|
Originally Posted by gazney101
(Post 11966440)
Can't you just replace the seals, it's only 2 rubber o rings?
Its very old mate, I'd rather just buy a new one with a guarantee for peace of mind |
Got a turbosmart dual port on my front mount. You can wind it right down so it recircs more than dumps, or wind it right out for lots of noise.
|
Originally Posted by Pross
(Post 11966444)
Got a turbosmart dual port on my front mount. You can wind it right down so it recircs more than dumps, or wind it right out for lots of noise.
Yea was looking at these turbosmart dual port valves, they seem like a pretty solid, well manufactured piece of kit |
+1 for Turbosmart, I have the plumb back, expensive but worth the money for me.
Trev |
Originally Posted by trevsjwood
(Post 11966482)
+1 for Turbosmart, I have the plumb back, expensive but worth the money for me.
Trev Is that the Turbosmart Kompact plumb back recirc dump valve? Any pics/links would be great :thumb: |
This is what mine looks like http://www.turbosmart.com/wp-content...ct_DP_34mm.jpg
All 3 of the 'ports' unscrew, you can swap them about. |
Originally Posted by Pross
(Post 11966511)
This is what mine looks like http://www.turbosmart.com/wp-content...ct_DP_34mm.jpg
All 3 of the 'ports' unscrew, you can swap them about. Oh that's cool, so you can turn it into a fully recirc valve and a vta valve, that's good. I like the look of this Turbosmart Vee Port Pro too... I like the fact you can adjust the spring to your requirements https://www.demon-tweeks.co.uk/perfo...e-vee-port-pro |
The way I have mine setup at the moment you really do have to put the foot down for it to not recirc, so theres no embarrassing noise going through town at all, only in the lanes.
|
Originally Posted by lewisdj
(Post 11966504)
Is that the Turbosmart Kompact plumb back recirc dump valve?
Any pics/links would be great :thumb: The dual port one is TS-0205- 1015/1016 Trev |
All times are GMT +1. The time now is 09:25 AM. |
© 2024 MH Sub I, LLC dba Internet Brands