Has anyone used Eurospec for a remap
Hi all,
I was wondering if anyone on here has used Eurospec in Guildford to remap their scoob and whether they are any good? Thanks. :thumb: |
Never heard of them. Which is never a good sign.
|
I hear you Andy,
I have also not got a response from them. Essentially I am looking to take your advice about a small remap when I get the FSTi so that it runs better on V-power (will drop a panel filter in for good measure ) as I live near Portsmouth I wanted to find somewhere close if possible. |
I think Duncan (aka RaceDynamix) actually lives on your doorstep somewhere near Bournemouth now. I know a lot of people talk negatively about him but he mapped my previous car for me and it was perfect through it's life. No issues.
|
Cool, I will look him up. I did look into Subaru 4 you but they dont seem to do their own mapping, from what i can see and if thats the case I would rather get a mapper to surrey rolling road than travel up to Newbury.
|
Just dropped Duncan a message and happened across this on his web page :norty:
http://www.racedynamix.co.uk/remap/p...e-nurburgring/ |
Have heard of a few that have had theirs mapped at Subaru4u. Not sure which mapper they use. You mat want to ring them to find out.
Duncan maps at Surrey Rolling road every week now. |
Originally Posted by Rusti
(Post 11961886)
Just dropped Duncan a message and happened across this on his web page :norty:
http://www.racedynamix.co.uk/remap/p...e-nurburgring/ Yep. That's Duncan's daily now. 2.35 built by Paul Finch with a modest 450bhp-ish. Looks very nice. Love that colour. |
Looks promising then if I can get him to Surrey Rolling Road.
I might fit an uprated fuel pump before if i get time, I assume the newage fuel pump like the SWRD colossus will be fine? |
Yep. Speak to Darrell at Scoobyworx and get one of his 340lph SWRD pumps. I have the newage impreza one fitted to my 04 FSTI and it dropped straight in. Plug and play.
I also have his 3 port boost solenoid which comes with a plug and play loom. Certainly worth doing before mapping also. |
Yeah I put one in my hawk, quality piece of kit. I saw that you had used the 3 port in your build thread, do you think it made much difference with the map?
|
It probably won't give you much if any bhp increase but it does give you far better control over boost levels when the car gets mapped which will give you a better map at the end.
|
Eurospec have been around for a long time. I've not used them myself, but they were one of the go-to experts when I used to have my Mitsubishi FTO (about 10 years ago!). No idea if they have any knowledge of Scooby's and remaps though.
|
Good to know.
|
Aren't eurospec the big GTR guys?
|
I'd not use them, they are on my doorstep but I use people that specialise in subaru mapping. Have heard some bad things but you do always in hear the bad stuff usually
|
1 Attachment(s)
Do you really think it's worth fitting one? Andy forest website doesn't mention about fitting one for under 300bhp.
Originally Posted by BrownPantsRacing
I also have his 3 port boost solenoid which comes with a plug and play loom. Certainly worth doing before mapping also.
|
To be fair, this will only be the foundations for further modifications later this year, I am hoping to get her to a comfortable 350 by mid next year so the 3 port will come into play.
|
Originally Posted by bustaMOVEs
(Post 11961970)
Aren't eurospec the big GTR guys?
Race dynamics looks like a good step forward, just waiting for a response. |
£420 for a full map, thoughts would be appreciated as I have not had remapping done before.
|
I paid £350 for a open source remap from Andrew Carr a year ago. Many many years ago Duncan charged me £350 for my remap on my hawk, but that was a long time ago now and I believe the price you've been quoted is his current price.
If you want Ecutek it will be more expensive at £550+ depending on the mapper. |
Thanks Andy :thumb:
|
No problems. :thumb:
|
All times are GMT +1. The time now is 11:54 PM. |
© 2024 MH Sub I, LLC dba Internet Brands