MDX321V Turbocharger
Hi guys,
Just need a quick advice on mdx321v turbocharger :) At the moment I have the S215 BILLET TURBO TECHNIQUE WITH CUT BACK EXHAUST WHEEL Fitted on my car 2.1 engine So I am thinking to get mdx321v turbocharger as I want 500 bhp but I was told that I need a downpipe to fit the MDX321V turbo in my car? as the S215 has different downpipe :/ also the mdx321v turbocharger dosen’t come with water pipes, gaskets, studs, braided oil feed pipe & oil pressure restrictor/adapter so can I use my S215 turbo water pipes, gaskets, studs, braided oil feed pipe & oil pressure restrictor/adapter for my MDX321V turbocharger? Thanks nez... |
Pointless swap as they're very similar units in terms of their output.
I suspect that your restriction isn't the turbo itself but something else, lack of headwork, oe cams, wrong headers etc etc. |
Originally Posted by MartynJ
(Post 11947303)
Pointless swap as they're very similar units in terms of their output.
I suspect that your restriction isn't the turbo itself but something else, lack of headwork, oe cams, wrong headers etc etc. |
The only difference between the 215 and the 205 is a slight cutback on the turbine wheel, that will slow down the turbine slightly but opens up the flow at the top end.
Yes we have seen good result out of OE heads and cams, however a change to better flowing heads etc may yield better results which is what your after. As I say, the turbo swap you're looking at IMHO won't yield a better result as the turbos flow similar amounts. |
All times are GMT +1. The time now is 06:06 PM. |
© 2024 MH Sub I, LLC dba Internet Brands