Lateral performance MDX321H (400bhp) Billet Turbo for Sale
Lateral performance MDX321H (400bhp) Billet Turbo for Sale
Specification as follows:- Billet version with forged billet compressor wheel Garrett “Ballistic Concepts” dual ball bearing core CHRA Motorsport Bronze Bearing Carriers Zircotec ceramic coated exhaust housing 1.2 bar actuator 58mm inlet The Turbo is in excellent condition and is coming up to 16 months old. The Turbo has seen very little use since purchased new and has covered approximately 2000 miles. The Turbo has been run with Fuchs Titan Race Pro S 10W-50 Ester Fully Synthetic Engine Oil Looking for £950 as the turbo is still like new really. Free UK Mainland delivery offered. |
https://www.scoobynet.com/general-technical-10/1036732-brand-new-turbo-issues.html
Is it this one? Bit disconcerting if so |
Originally Posted by DHGFK
(Post 11943764)
https://www.scoobynet.com/general-technical-10/1036732-brand-new-turbo-issues.html
Is it this one? Bit disconcerting if so Well spotted:thumb: I was considering this too. |
Originally Posted by DHGFK
(Post 11943764)
https://www.scoobynet.com/general-technical-10/1036732-brand-new-turbo-issues.html
Is it this one? Bit disconcerting if so I would NOT try and sell a faulty Turbo to some unsuspecting individual and burden them with the nightmare I experienced! In short the answer is NO! It is not the same unit referred to in the above mentioned thread. The issues experienced in the above mentioned thread turned out to be indeed directly related to the Turbo as suspected. As a result, the unit was returned under warranty and deemed unfit for purpose (Faulty), the unit was replaced with a brand new unit and the issues disappeared instantly. The only reason I have now chosen to sell the Turbo is the fact that, I have taken the car off the road and decided to use it competitively for hill climes/Sprints. This particular Turbo is a little too laggy on my particular setup unfortunately for this purpose; I need something to spool instantly such as one of the smaller IHI VF series, maybe a VF24, I’m really not sure what Turbo to use yet. |
I would suggest maybe going twinscroll setup and use a vf36/vf37 should make around 350-360bhp with similar torque
|
Originally Posted by ComputerSystems
(Post 11943790)
Can you explain to me why you have chosen to directly reference a previous thread of mine and intentionally damage the saleability of my Turbo?
I would NOT try and sell a faulty Turbo to some unsuspecting individual and burden them with the nightmare I experienced! In short the answer is NO! It is not the same unit referred to in the above mentioned thread. The issues experienced in the above mentioned thread turned out to be indeed directly related to the Turbo as suspected. As a result, the unit was returned under warranty and deemed unfit for purpose (Faulty), the unit was replaced with a brand new unit and the issues disappeared instantly. The only reason I have now chosen to sell the Turbo is the fact that, I have taken the car off the road and decided to use it competitively for hill climes/Sprints. This particular Turbo is a little too laggy on my particular setup unfortunately for this purpose; I need something to spool instantly such as one of the smaller IHI VF series, maybe a VF24, I’m really not sure what Turbo to use yet. |
Originally Posted by DHGFK
(Post 11943823)
Apologies if that's how it came across, but I've actually been planning to buy a MD321H from LP and was interested in this sale. I think it's fair to make sure the turbo hasn't had any issues when potentially sending £1100 to a stranger! Cheers for the reply either way :thumb:
|
Originally Posted by banny sti
(Post 11943828)
Keep your eyes open when buying an MD turbo from LP, would be the take away from this post :wonder:
|
Originally Posted by DHGFK
(Post 11943823)
Apologies if that's how it came across, but I've actually been planning to buy a MD321H from LP and was interested in this sale. I think it's fair to make sure the turbo hasn't had any issues when potentially sending £1100 to a stranger! Cheers for the reply either way :thumb:
|
Price reduction.
|
Hi ya, what engine size were/are you running this turbo on, and what's the price reduced to
👍 |
Hi there,
I am running this Turbo on a Forged 2 Litre V3/4 STI Engine with obviously no AVCS and standard Head/Cams. The engine is running a 8.4:1 compression ratio on a closed deck block. The engine produces 430Bhp and 370 ft-lb of torque @ 1.8Bar using this Turbo on 99 RON V-Power. Looking for £950 as the turbo is still like new really. |
SOLD
|
All times are GMT +1. The time now is 08:50 AM. |
© 2024 MH Sub I, LLC dba Internet Brands