***My version 2 STi project restoration and rebuild ***
 

So got this last week and I'm over the moon with it , it needs a little work but that said it's in amazing condition but I plan on making it 100% mint aswell as giving it a little attitude

To do list

New exedy clutch
Full cambelt kit
Oil + fluid changes
General engine bay refresh

Then the modding will start, cosmetically it won't change much but it'll be lowered on a nice set of wheels and I want at least 300bhp but for now here he is


https://cimg7.ibsrv.net/gimg/www.sco...9aba7bd2a5.jpg

https://cimg4.ibsrv.net/gimg/www.sco...e58e335a7d.jpg

https://cimg6.ibsrv.net/gimg/www.sco...a9d40b6cc1.jpg

https://cimg0.ibsrv.net/gimg/www.sco...475d627527.jpg

https://cimg2.ibsrv.net/gimg/www.sco...52dca749e7.png

https://cimg3.ibsrv.net/gimg/www.sco...d039aefe21.png

https://cimg4.ibsrv.net/gimg/www.sco...a098a15035.png

https://cimg6.ibsrv.net/gimg/www.sco...96dc2f4812.png

Nice dude

Very nice

Love it, as soon as my Type R is finished I'll be on the hunt for one of these to restore.

i was bidding on it on ebay - made huge money!
best of luck with it - looks solid shell

Yeh I bought it totally blind but the guy was genuine and I'm happy with it I don't think I over paid for it either considering it's condition , 1 owner with 106km

Prices of clean v1+v2s are on the up so it's a sound investment and I don't really have any plans of selling it anyway


The following week my mate picked this 1 up


https://cimg4.ibsrv.net/gimg/www.sco...cbc0dfdc8c.jpg

So it's started, engines out and the hard work starts here

https://cimg4.ibsrv.net/gimg/www.sco...f7b1588651.jpg

https://cimg5.ibsrv.net/gimg/www.sco...680c272d3e.jpg

Engine bay all cleaned and subframe all painted

https://cimg4.ibsrv.net/gimg/www.sco...3f941a1934.jpg

So fitted new cambelt kit all the belts, new exedy clutch , had the flywheel skimmed and balanced, replaced any corroded pipes fitted all new clips, fresh diff gearbox engine oils aswell as a full coolant systems flush ( the alloy header tank needs to be changed ) but went over it front to back

https://cimg0.ibsrv.net/gimg/www.sco...6f3652177f.jpg

Then painted all the fan covers and anything that needed touching up, aswell as removed and painted in inlet manifold ( I have a spare one I'm going to be getting sent away and finished properly but for now the letter box red will do )

So here's a before and after

https://cimg1.ibsrv.net/gimg/www.sco...e4fcd9f18d.jpg

nice...

Couldn't turn these down ��

So new tyres, decal, centre caps and maybe a light restoration these will be going on soon


https://cimg0.ibsrv.net/gimg/www.sco...8aa7c64e4d.jpg

https://cimg1.ibsrv.net/gimg/www.sco...3e365d75e6.jpg

So ordered 4 new toyo proxes had the wheels spun balanced, and put on new Compomotives decals aswell as new wheel nuts ( until my light weight ones turn up )

Pretty happy with them no rubbing and fit perfectly


https://cimg4.ibsrv.net/gimg/www.sco...c9e42a06cf.jpg

https://cimg8.ibsrv.net/gimg/www.sco...2113c6ad81.jpg

https://cimg0.ibsrv.net/gimg/www.sco...04b983f27d.jpg

https://cimg3.ibsrv.net/gimg/www.sco...1a2f19f387.jpg

https://cimg6.ibsrv.net/gimg/www.sco...de64fcd588.jpg

Looks great, brings back memories of my silver V3 STI. Fancy a V1 now but so hard to find a nice one.

Hey, nice build you have there. Thanks for sharing pics.

looks mint, look forward to seeing more of it!

Lovely car you have there, glad to see it being looked after. :thumb:

Thanks I'm trying to get it 100% mint


So it was out with the alloy expansion tank ( which was knackered ) and after having idle issues after trying a different BOV I decided to back to OEM so replaced them both with new original items


https://cimg6.ibsrv.net/gimg/www.sco...ce4dab3efb.jpg

https://cimg9.ibsrv.net/gimg/www.sco...cb06eae98.jpeg

So after searching the internet finally found a mint apexi power F.C. so once I have all my other mods I can get the car mapped

Also sourced a mint steering wheel aswell to replace the older one I had


https://cimg2.ibsrv.net/gimg/www.sco...6e3d56942.jpeg

So after finding one of my front calipers is binding on I decided rather than just look at fixing it , I’d do the brake upgrade I had planned anyway. I considered going for the brembos or even a bigger k sport or d2 6 pot but I really wanted to try and stay as true to the car as possible so spoke to Ian at Godspeed and looked at there “copy” 4 pot kits but I really didn’t like the idea of fitting replica parts to the car but then I was offered original 4 pots fully rebuild with stainless pots and powdered coated already to replace my oem calipers . I’m sure many of you would have gone for a much larger aftermarket caliper but I’m sure these will do what I ask of them just fine

I would highly recommend Godspeed if your considering doing a brake upgrade or just want them to refurb your existing setup, Ian was super helpful and they arrived securely wrapped within a few days

In the kit you get 2 calipers Kevlar pads 298mm g grooved discs and fitting kit, I also got a set of braided brake lines .I’ll get some dot3 brake fluid to relace the old stuff to


https://cimg4.ibsrv.net/gimg/www.sco...916ae68a0.jpeg

https://cimg5.ibsrv.net/gimg/www.sco...8e839e128.jpeg

https://cimg6.ibsrv.net/gimg/www.sco...fd3b6b65f.jpeg

https://cimg7.ibsrv.net/gimg/www.sco...9944cd856.jpeg

So finally managed to get the new calipers , discs and pads fitted along with some dot 4 fluid


https://cimg2.ibsrv.net/gimg/www.sco...bc6df21a5.jpeg

https://cimg5.ibsrv.net/gimg/www.sco...88d7c8e3e.jpeg

https://cimg9.ibsrv.net/gimg/www.sco...1d7c9f18e.jpeg

Just added my Christmas present from the Mrs , nice to have oem items in place and looks way nicer than the sti one I had before


https://cimg3.ibsrv.net/gimg/www.sco...8c7d580cd.jpeg

https://cimg7.ibsrv.net/gimg/www.sco...3fcc3426e.jpeg

Nice classic you got there, keep up the good work on it!

Rich

Looks good dude, reminds me of my first one. Good effort cleaning the old girl up. Nice to see some early model cars getting some love....

If you're using Evens coolant. Make sure you always keep a fresh bottle in the boot. If you ever have a coolant issue when you are out and about obviously you can just top the system up with water you have to use Evens and breakdown companies don't carry Evens in their vans.... be sure to use the Evens engine flush before putting the waterless coolant in.... do no mix this with water....

Look forward to seeing more updates....

Just spotted a mistake in my reply to you that's worth pointing out. Auto correct changed my response from can't to can. What I ment to say was " obviously you CAN'T mix Evens coolant with water so carry a bottle around ".... I'm sure you got that from the rest of the message anyway but i just wanted to be clear :) ....

keep it up dude....

Bit of a update, it’s been a nightmare few months, the engine was stripped , all the head work and machine work done. Then prior to the rebuild beginning we notice the piston liner had been cracked during the machine work !!!

https://cimg2.ibsrv.net/gimg/www.sco...e1c695c7f.jpeg
https://cimg3.ibsrv.net/gimg/www.sco...535896a59.jpeg
https://cimg4.ibsrv.net/gimg/www.sco...c1b4f3fb7.jpeg
https://cimg5.ibsrv.net/gimg/www.sco...7ba618a78.jpeg
https://cimg6.ibsrv.net/gimg/www.sco...d90db9a63.jpeg
https://cimg7.ibsrv.net/gimg/www.sco...e9aceb02a.jpeg
https://cimg1.ibsrv.net/gimg/www.sco...04dd50fcd.jpeg

So there was only one thing for it ? GO FULLY FORGED CLOSED DECK BLOCK 😁

https://cimg8.ibsrv.net/gimg/www.sco...fbe821e02.jpeg
https://cimg0.ibsrv.net/gimg/www.sco...42c0832f2.jpeg