TD05 top entry good condition
My mates after a TD05 top entry, wants one in good condition thanks
|
You mean 'front' entry i.e. conventional?
|
No conventional bottom entry.
|
Ah, you mean the position of the entry to the turbine i.e. where it mates to the up-pipe?
Usually, when people refer to "xyz-entry", it's (usually) assumed to mean the position of the intake spout of the compressor housing. |
No I mean the entry of the compression housing. Why would I mean anything else?
|
Never heard of "bottom" entry TD05.
Only "top" (OEM ph.1 fitment) or "front" (aftermarket compressor cover, or modded ph.1 cover). I know they're only 'colloquial' terms (and therefore can be open to interpretation)... So I might be missing something. :confused: If so, then I apologise for wasting your time. You are talking about an Impreza-fitment TD05, aren't you? |
2 Attachment(s)
Top Entry
Attachment 24842 Front entry convertion Attachment 24843 as per your post ? https://www.scoobynet.com/960039-who...l#post11804572 |
I'm getting mixed up i mean top entry :thumb:
Originally Posted by joz8968
(Post 11937977)
Never heard of "bottom" entry TD05.
Only "top" (OEM ph.1 fitment) or "front" (aftermarket compressor cover, or modded ph.1 cover). I know they're only 'colloquial' terms (and therefore can be open to interpretation)... So I might be missing something. :confused: If so, then I apologise for wasting your time. You are talking about an Impreza-fitment TD05, aren't you? |
I have a standard top entry TD05 , £80 plus postage
|
Any play and pictures? thanks
|
Originally Posted by jaygsi
(Post 11937995)
Any play and pictures? thanks
|
sorted it , comes with two new studs for the downpipe
https://cimg6.ibsrv.net/gimg/www.sco...ab55a35741.jpg https://cimg7.ibsrv.net/gimg/www.sco...bf1ec60d7b.jpg |
Originally Posted by jaygsi
I'm getting mixed up i mean top entry :thumb:
:thumb: Thought that might have been the case. It's all good. :) |
Bottom entry should be the correct term really :thumb:
|
Originally Posted by jaygsi
Bottom entry should be the correct term really :thumb:
Do you mean in terms of the actual feed directly into the compressor i.e. at the "bottom" part of the feed-spout (as opposed to the "top" of the upward-facing spout)? If so, that's an 'interesting' take on it. |
interested in mine ?
|
1 Attachment(s)
Hi.I have a TD05 16g compression housing only for sale.PM me if your interested.Attachment 24841
|
Its for my mate i will ask him thanks.
Originally Posted by domino46
(Post 11938067)
interested in mine ?
|
All times are GMT +1. The time now is 06:17 AM. |
© 2024 MH Sub I, LLC dba Internet Brands