ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   General Technical (https://www.scoobynet.com/general-technical-10/)
-   -   subaru impreza Sti Type UK (https://www.scoobynet.com/general-technical-10/1046944-subaru-impreza-sti-type-uk.html)

Nezscooby 24 April 2017 09:14 PM

subaru impreza Sti Type UK
 
1 Attachment(s)
Hi Guys,

just get my car back from Andy William very happy with the job done 2.1 Stroker

Car Spec as follows:

COSWORTH RODS,
MAHLE PISTONS,
11MM HEAD STUDS,
MODIFIED RCM OIL PUMP,
ACL RACE BEARINGS,
GT SPEC MANIFOLDS,
3" FULL S/S DECAT EXHAUST SYSTEM,
S215 BILLET TURBO TECHNIQUE WITH CUT BACK EXHAUST WHEEL,
LATERAL PERFORMANCE 750CC FLOWED INJECTORS,
FRONT MOUNT INTERCOOLER,
340LPH FUEL PUMP,
2 LTR AVCS HEADS FITTED
PADDLE CLUTCH FITTED
HARD PIPE KIT,
INDUCTION KIT,
UPRATED SILICONE HOSES,
SIMTEK ECU FITTED AND MAPPED BY Steve Simpson

Engine Power 429 BHP

I just want to know is that normal power for my Spec? As I was thinking I should have get more like 450 or 480 BHP :/ turbo Boost is at 1.8 Bar

This is the dyno Graph:

Attachment 25070

Nezscooby 25 April 2017 08:57 PM

:wonder:

joz8968 25 April 2017 09:15 PM

Evidently, nobody cares lol

Only kidding. :D

Nezscooby 26 April 2017 10:09 PM


Originally Posted by joz8968 (Post 11935695)
Evidently, nobody cares lol

Only kidding. :D

Lol you might be right lol :D the only reason I posted that was coz I heard a lot of good things about S215 BILLET TURBO TECHNIQUE and Enginetuner had some good results out of these turbos....

joz8968 27 April 2017 06:59 PM

Isn't that the enginetuner supplied turbo, which has the bespoke elbow i.e. which replaces the top part (bellmouth) of the downpipe?

Nezscooby 27 April 2017 10:32 PM


Originally Posted by joz8968 (Post 11936137)
Isn't that the enginetuner supplied turbo, which has the bespoke elbow i.e. which replaces the top part (bellmouth) of the downpipe?

Yep that's the one :)

scoobypaul_temp 28 April 2017 09:26 AM

If you have a look on this thread:

https://www.scoobynet.com/trader-ann...206-turbo.html

It says:

Unless you have a CDB 2.5 of course in which case fit the S215B which is a cutback turbine wheeled version of the S206 meant for engines larger than 2.1.

Maybe that is why?

joz8968 28 April 2017 12:45 PM

Yeah, isn't the S206 a 400+ job; and the S215 capable of 500+...?

Nezscooby 28 April 2017 02:12 PM

I have spoken to Alan Jeffery and he said something is not right with the car as with same specs as my car he had over 500 BHP figures so will take the car to him and I will update you guys how it goes but it's dame long way from London

scoobypaul_temp 28 April 2017 03:21 PM


Originally Posted by Nezscooby (Post 11936313)
I have spoken to Alan Jeffery and he said something is not right with the car as with same specs as my car he had over 500 BHP figures so will take the car to him and I will update you guys how it goes but it's dame long way from London

Might be a long way bud, but will be worth it if you get it all sorted. Good luck :thumb:

Nezscooby 28 April 2017 03:43 PM


Originally Posted by scoobypaul_temp (Post 11936332)
Might be a long way bud, but will be worth it if you get it all sorted. Good luck :thumb:

Yes you right it's worth it and thanks mate :thumb:

Nezscooby 15 May 2017 05:43 PM

2 Attachment(s)
Just to update you guys car is back from enginetuner :) when it was on dyno it only had 387.8 bhp somehow it lost 40 bhp within a month :wonder:

Attachment 24389

Any ways martyn mapped the car again and fitted Alcatek ECU With Motorsport Package result 440 bhp

Attachment 24390

car his switchable map high and low boost :thumb:


All times are GMT +1. The time now is 10:42 PM.


© 2024 MH Sub I, LLC dba Internet Brands