MDX321T, 625cc injectors, Harvey Up-pipe, stainless headers
5 Attachment(s)
Evening. Got a few bits from my car up for sale, going down a different route so all bits are off and ready to go now.
All items can be collected from Leigh Lancashire or I can post for cost but I'm sorry I'm not doing the whole dibs thing. First to pay or secure with a deposit secures the item. Payment on collection or via PayPal as a gift or if not then please cover fees. First up is my MDX321T, just over 2 years old in full working order, slight play in shaft as expected with this turbo. Unsure of mileage as I bought it second hand. Was running 380bhp on my car which I thought was low but found out tonight I have no compression on 1 cylinder so was doing well I think at 1.6 bar. Has some slight marks on the tips of the compressor wheel but ran perfectly for me no problem. Has a snapped stud which I will replace prior to sale. I'm after £1000 for this. Attachment 25786 Attachment 25787 Attachment 25787 Attachment 25789 Attachment 25790 |
Can I have info on headers and injectors please
|
3 Attachment(s)
Next up is my Harvey smith up-pipe bought from AS performance, basically as new. Will come with a full set of studs on the top, currently one missing.
I'm looking for £80 for this. Attachment 25783 Attachment 25784 Attachment 25785 |
6 Attachment(s)
Stainless headers up next, these are from Williams motorsport and flowed really well on my motor.
They are heat wrapped and in really good condition. They are standard two bolt up-pipe fitting and fit really well. They have an additional boss welded in to relocate the oxygen sensor which is NOT included but come with a bung to plug the hole. I'm looking for £175 for these. Attachment 25777 Attachment 25778 Attachment 25779 Attachment 25780 Attachment 25781 Attachment 25782 |
Was the up pipe specifically matched to the md turbo
|
I will have the headers if they fit my 2.5 hawk wrx
|
5 Attachment(s)
625cc topfeed injectors up next, sorry will get photos of these through the week, completely forgot while I was at my lockup.
these ran 490bhp along with the MDX321T on the car I bought them both from. Fit in standard fuel rails. I'm looking for £200 Got a zerosports low temp stat too, good working order £20 Attachment 25772 Attachment 25773 RCM come filter including aluminium trumpet, the trumpet has a hole used for a maf which I have taped up with no I'll effects. In good working order but has some damage as seen. Looking for £60 Attachment 25774 Attachment 25775 Also got this turbo inlet pipe I made, works really well and almost impossible to collapse like some silicone pipes. £60 for this please Attachment 25776 |
Originally Posted by Piggysniffer
(Post 11928981)
Was the up pipe specifically matched to the md turbo
|
Originally Posted by Piggysniffer
(Post 11928982)
I will have the headers if they fit my 2.5 hawk wrx
Thanks. |
Interested in the Uppipe too
|
Ok, what car/engine are the headers off of
|
Can I just make sure that the headers are still unequal length and keep the scoob burble
|
They came off a 2004 2.0 litre STi engine.
Pretty certain they're all the same though. And yes still unequal length so sound great. |
Ok mate, I'm just gonna double check, been looking for a set of these for my build as bought a built bottom end from graham hickman at group b and these Williams headers were advised, can you give me till midday tomorrow at the latest please to make sure they will be ok for my engine
|
Just had a quick check, looks the same right through 2001-2007 so I will definitely have these, any chance we can do a deal on the headers and the up pipe together posted
|
Originally Posted by Piggysniffer
(Post 11929007)
Just had a quick check, looks the same right through 2001-2007 so I will definitely have these, any chance we can do a deal on the headers and the up pipe together posted
|
Any news mate
|
Are headers still for sale can collect tonight?
|
Headers and up-pipe are now sold. Thanks.
|
hello mate can you send me pics of the damage to the fins and how much play is actually in the shaft? send to g4va@hotmail.com or 07976126501
|
Headers and uppipe arrived yesterday, boxed up perfectly and unscathed in transit, many thanks mate !! |
Turbo, headers & up pipe sold.
All other stuff still for sale. |
Few bits still for sale.
|
Hi
Is the thermostat still available? |
Originally Posted by turbotog
(Post 11936510)
Hi
Is the thermostat still available? |
Are the injectors genuine or the recapped injectors ?
|
They are genuine injectors. I will remove through the week and get some pics if you like.
|
Originally Posted by ianbott
(Post 11936961)
They are genuine injectors. I will remove through the week and get some pics if you like.
|
Hey is the intake pipe still available?
Zach |
Thermostat sold.
Mustoe91 the injectors are actually 650cc and i believe they are power enterprises. |
All times are GMT +1. The time now is 07:25 PM. |
© 2024 MH Sub I, LLC dba Internet Brands