Classic window regulator
The drivers front window on my uk classic has started clunking/won't go all the way up without me lifting it. I guess some teeth have stripped on the regulator? How hard are these to remove/replace? Also I'm struggling to find a new one from the usual car parts places, are they dealer only?
:thumb: |
Not to bad to swap the whole mechanism over, just get a complete door from one of the breakers on here.
Only real issue is the window has to be most of the way down to access one of the bolts to remove the glass. From memory, there's 2 bolts for the glass, 6 bolts hold the motor etc in place and 3 bolts on each of the guides. There's a bolt and small bracket on each of the guides that you don't want to remove, as they are the "stops" for the meachanism. |
Originally Posted by mickywrx
(Post 11922828)
Not to bad to swap the whole mechanism over, just get a complete door from one of the breakers on here.
Only real issue is the window has to be most of the way down to access one of the bolts to remove the glass. From memory, there's 2 bolts for the glass, 6 bolts hold the motor etc in place and 3 bolts on each of the guides. There's a bolt and small bracket on each of the guides that you don't want to remove, as they are the "stops" for the meachanism. |
You may find it's the window guides anyway, they can come apart at the bottom.
Hint: stick some Dynamat or similar into the door while you have it all apart. |
All times are GMT +1. The time now is 01:11 AM. |
© 2024 MH Sub I, LLC dba Internet Brands