SR powered impreza
 

Thought I'd put up a little project thread of my current impreza which is a 1999 UK turdo2000
Had about 4-5 years now and was used daily and odd track use.
After its Cambelt tension bolt failed causing it to bend every valve bar two I kind of lost interest in it for a while, tho I did put another engine in it but was never to happy with it and continued just to leave it covered up on the drive!
Last few months got an urge to sort and do something a little different, so currently fitting an sr20det engine and gearbox and running rwd and semi space framing the front end. No doubt there will be some hate and why's I'm ruining it haha but just thought I'd do something different
Pics to follow

Attachment 28734
Attachment 28735
Attachment 28736

Picked up a low mileage bent cam sr20det complete with everything minus gearbox
Attachment 28733

Attachment 28730
Attachment 28731
Bumper bar had seen better days

Be interesting.....

No faulting your enthusiasm and if you like it then go for it and please keep giving updates of the work you are doing.Great stuff in my opinion.

Attachment 28728
Attachment 28729
When I first tested the engine I basically just dropped it in the bay on the subframe. Engine sat way to high so started modding a spare subframe

Attachment 28712
Attachment 28713
Sits in there lovely now. Tho removed now as semi space framing the front

Great stuff. Subscribed. :thumb:

Really interesting. Subscribed.

This will be interesting! Best of luck.

Little update have not done much lately as waiting for steel to turn up as I can start the space frame front. Started stripping engine down so bits can get powder coated and cleaned up, also removal of parts not needed.
Thought be time to clean up the 6 pots as there looking a bit seasoned. Had some nice spacers made aswell for the cradle and mounts
Attachment 28549
Attachment 28550
Attachment 28551
Attachment 28552
Attachment 28553

I like this project conceptually :)

Now that you're using a longitudinal engine, will there be enough space for double wish bones too?

I could alter the suspension setup on the front now but doubt I'll be doing much with the geometry of the suspension just yet. Be interesting to see how it handles

Attachment 28468
Attachment 28469
Attachment 28470

Bit more progress as my radiator and fan randomly turned up on a Sunday so started getting brackets and mounting points sorted plus had to shift the intercooler again as was sitting to low
Attachment 28426
Attachment 28427
Attachment 28428

Little update got most of the front sorted now and all brackets in just to fully weld it. Wasn't happy with my front subframe modifications would have done fine just a little to close to the sump in certain areas so I decided to just go and make a fresh frame from scratch
Attachment 28005
Also spotted this gem upside down had a brand new centre section in it but didn't have the minerals to pinch it
Attachment 28006

Well got a bit further got the subframe in tho needs to be removed couple stray tacks removed then painted. But now engine sits alot better with more clearance.
Started sorting intercooler parts aswell
Attachment 27800
Attachment 27801
Attachment 27802
Will be putting the gearbox on tomorrow to sort prop shaft out.

Thought I'd do quick update car is up and running now. Running stage 3a in the nissan world which is 340-360 just needing to sort rear bushes out on the lateral arms
http://i441.photobucket.com/albums/q...0426245738.jpg
http://i441.photobucket.com/albums/q...s/DSC_0226.jpg
http://i441.photobucket.com/albums/q...829303875.jpeg
http://i441.photobucket.com/albums/q...s/DSC_0204.jpg
http://i441.photobucket.com/albums/q...s/DSC_0206.jpg
http://i441.photobucket.com/albums/q...DSC_0208_1.jpg
http://i441.photobucket.com/albums/q...s/DSC_0116.jpg

True to title :thumb:

What a project. Good read too. Nicely done mate 👍