Cost of a twinscroll rotated pipework?
As above looking at putting a Borg EFR 8374 on my 2.35 blob. Just seeing who's out there to best buy or make me a twinscroll downpipe and up pipe to suit EWG turbo.
Thanks ryan |
I will be watching this with interest - subcribed
|
Originally Posted by Rbon91
(Post 11845084)
As above looking at putting a Borg EFR 8374 on my 2.35 blob. Just seeing who's out there to best buy or make me a twinscroll downpipe and up pipe to suit EWG turbo.
Thanks ryan |
Bump, did you get anything sorted Rbon 91
|
i have Zen/relentless performance making me a custom downpipe/upipe with EWG for an EFR 7670.. maybe worth giving Ren a shout
|
That's a very large efr, what are you using the car for?
|
If I break mine I will have the full lot available inc turbo and gates for 2k
|
Originally Posted by banny sti
(Post 11876029)
If I break mine I will have the full lot available inc turbo and gates for 2k
|
Ryan get Matty to make you up the pipework he sorted my twinscroll out I kept the oem headers and he made up the uppipes and down pipes and side exit which i have changed now to an angled exit and downswept pipe
|
How come you changed from the desire exit gus
|
Originally Posted by banny sti
(Post 11876029)
If I break mine I will have the full lot available inc turbo and gates for 2k
|
Originally Posted by hhh1234
(Post 11876353)
Banny PM me if your selling your turbo setup, ;)
|
I managed to get a full turbo set up from mine in the end as a full kit
BORG 7064 Twinscroll with turbo smart actuator Custom headers, up pipe and downpipe, All wrapped in DEI CdF turbo blanket 4 bar map sensor 3 port boost solenoid So was literary just bolt on. Had to mod the downpipe a bit but happy with it. Set up made 475/525 at 1.7bar on the 2.5 it came off so looking forward in a few weeks to what it makes on mine |
3 Attachment(s)
Originally Posted by joe v3sti
(Post 11876245)
How come you changed from the desire exit gus
Attachment 30582 Attachment 30583 Attachment 30584 |
As always guss, love it!
|
Originally Posted by Rbon91
(Post 11876426)
I managed to get a full turbo set up from mine in the end as a full kit
BORG 7064 Twinscroll with turbo smart actuator Custom headers, up pipe and downpipe, All wrapped in DEI CdF turbo blanket 4 bar map sensor 3 port boost solenoid So was literary just bolt on. Had to mod the downpipe a bit but happy with it. Set up made 475/525 at 1.7bar on the 2.5 it came off so looking forward in a few weeks to what it makes on mine |
Any update on this?
|
Originally Posted by juggers
(Post 11892000)
Any update on this?
Borg twinscroll 7064 Fully custom headers up pipe and downpipe. Heat blanket (needed!) And a few other bits well worth it. Just written on your post before best guy to speak to is Andy Williams. Williams motorsport not for from Chester. Top guy and did a great build on my car Ryan |
Originally Posted by Rbon91
(Post 11892034)
Got a full rotated system off a mate who was breaking his car
Borg twinscroll 7064 Fully custom headers up pipe and downpipe. Heat blanket (needed!) And a few other bits well worth it. Just written on your post before best guy to speak to is Andy Williams. Williams motorsport not for from Chester. Top guy and did a great build on my car Ryan |
Originally Posted by juggers
(Post 11892044)
Where can I get the same kit from?
Jase at Area 52 can build you a kit. Not sure on the wait time now though. As I know he's doing a few. Or speak to your engine builder see if they know anyone. As when making a custom kit you need the car and engine there. Well worth it though. |
Where is Area52 based?
|
Originally Posted by juggers
(Post 11892055)
Where is Area52 based?
Speak to Andy I'm sure he's more than capable of building the lot for you while he's doing the engine. |
All times are GMT +1. The time now is 07:08 PM. |
© 2024 MH Sub I, LLC dba Internet Brands