Cost of a twinscroll rotated pipework?
Trending Topics
14 September 2016, 01:53 PM
#8
Scooby Regular
14 September 2016, 10:08 PM
#9
Scooby Regular
iTrader: (2)
Join Date: Oct 2002
Location: oop north in a spec-c.Now sold and starting on a classic ra track/sprint/road car
Posts: 2,536
Likes: 0
Received 7 Likes
on
7 Posts
Ryan get Matty to make you up the pipework he sorted my twinscroll out I kept the oem headers and he made up the uppipes and down pipes and side exit which i have changed now to an angled exit and downswept pipe
15 September 2016, 08:26 PM
#13
I managed to get a full turbo set up from mine in the end as a full kit
BORG 7064 Twinscroll with turbo smart actuator
Custom headers, up pipe and downpipe,
All wrapped in DEI
CdF turbo blanket
4 bar map sensor
3 port boost solenoid
So was literary just bolt on. Had to mod the downpipe a bit but happy with it.
Set up made 475/525 at 1.7bar on the 2.5 it came off so looking forward in a few weeks to what it makes on mine
BORG 7064 Twinscroll with turbo smart actuator
Custom headers, up pipe and downpipe,
All wrapped in DEI
CdF turbo blanket
4 bar map sensor
3 port boost solenoid
So was literary just bolt on. Had to mod the downpipe a bit but happy with it.
Set up made 475/525 at 1.7bar on the 2.5 it came off so looking forward in a few weeks to what it makes on mine
15 September 2016, 10:01 PM
#14
Scooby Regular
iTrader: (2)
Join Date: Oct 2002
Location: oop north in a spec-c.Now sold and starting on a classic ra track/sprint/road car
Posts: 2,536
Likes: 0
Received 7 Likes
on
7 Posts
Joe I kept on catching it when I was driving the car on and off the trailer as my ramps are only 6 ft long had to put bits of wood underneath them to raise the ramps a couple of inches as it turned out the way I have the exhaust now is much better and the decibels are less in actual fact Im sure i robbed your idea sure it was your car that had the tailpipe facing down plus i have it coming out of the bumper much higher.
15 September 2016, 11:56 PM
#16
Scooby Regular
iTrader: (17)
Join Date: Jan 2008
Location: N.IRELAND
Posts: 750
Likes: 0
Received 0 Likes
on
0 Posts
I managed to get a full turbo set up from mine in the end as a full kit
BORG 7064 Twinscroll with turbo smart actuator
Custom headers, up pipe and downpipe,
All wrapped in DEI
CdF turbo blanket
4 bar map sensor
3 port boost solenoid
So was literary just bolt on. Had to mod the downpipe a bit but happy with it.
Set up made 475/525 at 1.7bar on the 2.5 it came off so looking forward in a few weeks to what it makes on mine
BORG 7064 Twinscroll with turbo smart actuator
Custom headers, up pipe and downpipe,
All wrapped in DEI
CdF turbo blanket
4 bar map sensor
3 port boost solenoid
So was literary just bolt on. Had to mod the downpipe a bit but happy with it.
Set up made 475/525 at 1.7bar on the 2.5 it came off so looking forward in a few weeks to what it makes on mine
06 November 2016, 07:53 PM
#18
Got a full rotated system off a mate who was breaking his car
Borg twinscroll 7064
Fully custom headers up pipe and downpipe.
Heat blanket (needed!)
And a few other bits well worth it.
Just written on your post before best guy to speak to is Andy Williams. Williams motorsport not for from Chester. Top guy and did a great build on my car
Ryan
Borg twinscroll 7064
Fully custom headers up pipe and downpipe.
Heat blanket (needed!)
And a few other bits well worth it.
Just written on your post before best guy to speak to is Andy Williams. Williams motorsport not for from Chester. Top guy and did a great build on my car
Ryan
06 November 2016, 08:27 PM
#19
Got a full rotated system off a mate who was breaking his car
Borg twinscroll 7064
Fully custom headers up pipe and downpipe.
Heat blanket (needed!)
And a few other bits well worth it.
Just written on your post before best guy to speak to is Andy Williams. Williams motorsport not for from Chester. Top guy and did a great build on my car
Ryan
Borg twinscroll 7064
Fully custom headers up pipe and downpipe.
Heat blanket (needed!)
And a few other bits well worth it.
Just written on your post before best guy to speak to is Andy Williams. Williams motorsport not for from Chester. Top guy and did a great build on my car
Ryan
06 November 2016, 08:43 PM
#20
Jase at Area 52 can build you a kit. Not sure on the wait time now though. As I know he's doing a few.
Or speak to your engine builder see if they know anyone. As when making a custom kit you need the car and engine there. Well worth it though.
Thread
Thread Starter
Forum
Replies
Last Post
Jagga35
Car Parts For Sale
0
12 June 2016 09:48 AM