Which discs and pads for my car 97 Type R
As above.
I remember last time I need rear discs they are a nighmare to get? Anyway I have been on ebay and I am lost. I basically am looking for a set of front and rear discs and pads. Can someone give me part numbers and/or measurements, vented or non vented etc? |
What version do you have , what rear calipers are fitted , 1 or 2 pot ?
|
Originally Posted by Godspeed Brakes
(Post 11821653)
What version do you have , what rear calipers are fitted , 1 or 2 pot ?
Version 3 and must have 1 pot on rear |
The rear discs we can only get from Subaru , haven't found anyone that does a 290mm solid rear disc with 190mm handbrake , so I would recommend fitting 290mm vented discs from a version 4 & 5 , and fitting rear vented one pot calipers from the classic WRX , P1 ect , as these will fit straight on.
You can fit the 2 pot brakes on , but will need new backplates , at about £100 each , and stripping them to fit will probably damage the wheel bearings so they would need changing , unless you can find some later hubs complete with discs and 2 pots at a reasonable price. Fronts are straight forward enough having 294mm vented discs and Subaru 4 pots as standard Cheers Ian |
Nightmare V3 do as Ian says and get yourself some V4/5/6 hubs and be done with it. Then fit 2 pots. I have a set or two of V3 discs floating about somewhere if there of any use to you. Don't know what there like but I think they where ok. Also have some Subaru rear 2 pots.
|
Originally Posted by Evansawd
(Post 11821687)
Sorry to hijack.
Have a 96 turbo. Am told it has v1/2 engine and I know it's made up of all sorts version parts thrown together. Is there an easy way to identify which hubs I have. Looking to upgrade to 2pot rears and have set of my99 rear hubs sare if I need to swap. Cheers |
Originally Posted by Evansawd
(Post 11821814)
OK firstly chill out its not like I asked a completely different question. Secondly if I started a thread titled which pads and discs for my 96 turbo I'm 110% sure I would be told to refer to other threads using search bar and be directed to your thread and be non the wiser. Is a very appropriate post on a thread that people are already involved in and can help. Get over it
For the op i got mine from icp they were not cheap though :( but way way cheaper that a dealer. |
I have a set of mint 290/190 vented rear disks and P1 calipers if your interested
|
All times are GMT +1. The time now is 03:01 AM. |
© 2024 MH Sub I, LLC dba Internet Brands