ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   General Technical (https://www.scoobynet.com/general-technical-10/)
-   -   Subaru Impreza 96-05 5 Speed ICP Gear Linkage Rebuild Repair Kit (https://www.scoobynet.com/general-technical-10/1031671-subaru-impreza-96-05-5-speed-icp-gear-linkage-rebuild-repair-kit.html)

andrewgti 07 November 2015 05:50 PM

Subaru Impreza 96-05 5 Speed ICP Gear Linkage Rebuild Repair Kit
 
My Impreza Type R 1999 is suffering from a floppy/sloppy gear stick. I can see by looking on here and other forums that this is down to either one or all of bushes worn or the spring that sits in the linkage on the underside of the car which has already been replaced but I still have the issue.

I have found the following linkage rebuild kit supplied by ICP (Import Car Parts) http://www.importcarparts.co.uk/part...y=&searchPart= that will hopefully solve the problem . Has anyone had any experience of having used this kit and can say that it is decent quality?

Zuber 09 November 2015 08:17 AM

I did this to my Classic last year and it made a massive difference, the selector is like brand new now. I did use some uprated bushings in the selector linkage, Sti and Perrin but the UJ and the small gear stick bushings were oe.

AS Performance 09 November 2015 08:57 AM

or you could get us to uprate the UJ (cant be done easily as std due to the rivet type assembly)

https://www.facebook.com/media/set/?...1523135&type=3

andrewgti 09 November 2015 06:35 PM


Originally Posted by Zuber (Post 11758541)
I did this to my Classic last year and it made a massive difference, the selector is like brand new now. I did use some uprated bushings in the selector linkage, Sti and Perrin but the UJ and the small gear stick bushings were oe.

Thanks for the response its good to know that it is decent quality :)

andrewgti 09 November 2015 06:40 PM


Originally Posted by AS Performance (Post 11758550)
or you could get us to uprate the UJ (cant be done easily as std due to the rivet type assembly)

https://www.facebook.com/media/set/?...1523135&type=3

Is this something that you can do on the basis of removing the necessary parts myself and sending them off for refurb or would it be something that you would need the car to remove and up rate the UJ then refit? If it is the latter you are a bit far away from me to warrant a trip up to get it sorted as I am down in South Wales.

AS Performance 10 November 2015 05:41 PM

we do them on an exchange basis normally depending on exactly which linkage set-up you have, the 6spd ones we simply supply bush kits

andrewgti 15 November 2015 10:56 AM

I have a 5 speed. What costs would be involved in getting this sorted out? Also if was do to this would you be willing to send me the refurbished one first then I send mine back once the new one is fitted?

jaygsi 20 November 2015 10:48 AM

I've bought one off ebay looking to replace mine, is it worth trying the spring first?

AS Performance 20 November 2015 02:26 PM

no idea what age car you have but the spring is only used on TY752 boxes, not required on TY754's

jaygsi 20 November 2015 08:35 PM

Its a 1998 UK turbo

**jay** 21 November 2015 09:49 AM

Ive used the icp kit on my ra was very happy with it.

jaygsi 21 November 2015 09:40 PM

I've bought an original Subaru one off gay bay.


All times are GMT +1. The time now is 01:34 AM.


© 2024 MH Sub I, LLC dba Internet Brands