|
Fitting an 05 sti blob boot to a 06 wrx hawkeye?
Quick question
I thought id try and sti spoiler on my wrx as i dont like the wrx one. Ive manage to find a blob sti spoiler in 48w as ive been looking for one for a while but it doesnt seem to fit correct? Ive swapped all the lock mech over etc but it seems to sit high, and doesnt lock properly i also cannot get th boot lever to work by the drivers seat. Has anyone had a blob eye boot lid on a hawkeye? I did a little research before i bought it and was under the impression it was the same boot just different badging? Just wondering weather to drill the wrx boot and fit the sti spoiler or spend more time trying to make the sti boot work thanks |
Originally Posted by McGoo
(Post 11731476)
Quick question
I thought id try and sti spoiler on my wrx as i dont like the wrx one. Ive manage to find a blob sti spoiler in 48w as ive been looking for one for a while but it doesnt seem to fit correct? Ive swapped all the lock mech over etc but it seems to sit high, and doesnt lock properly i also cannot get th boot lever to work by the drivers seat. Has anyone had a blob eye boot lid on a hawkeye? I did a little research before i bought it and was under the impression it was the same boot just different badging? Just wondering weather to drill the wrx boot and fit the sti spoiler or spend more time trying to make the sti boot work thanks |
Originally Posted by south_scoob
(Post 11731483)
Its def the way you fitted it the brackets. Ive had same problem in old cars its not an easy job imo. Alot of trial and error
Do you think its the brackets holding the boot on or do you think its the brackets holding the locking mechanism? Or a mixture of both? Cheers |
Should be just a straight swap over mate
|
Originally Posted by McGoo
(Post 11731476)
Quick question
I thought id try and sti spoiler on my wrx as i dont like the wrx one. Ive manage to find a blob sti spoiler in 48w as ive been looking for one for a while but it doesnt seem to fit correct? Ive swapped all the lock mech over etc but it seems to sit high, and doesnt lock properly i also cannot get th boot lever to work by the drivers seat. Has anyone had a blob eye boot lid on a hawkeye? I did a little research before i bought it and was under the impression it was the same boot just different badging? Just wondering weather to drill the wrx boot and fit the sti spoiler or spend more time trying to make the sti boot work thanks There is a small tab on the lock which when moved prevents the interior switch activating the boot lock. If you fit the STi Spoiler you will also need the beefier torsion bars that raise the boot. The boot badges may be different but the hole for the boot lock is square and not round like the Blob. There is a Subaru supplied OE new Hawkeye boot lid on eBay for £36 - item number 201419630081. |
I've got a 2005 sti bootlid in 48w with the square lock if need
|
Originally Posted by The Trooper 1815
(Post 11731753)
There is a small tab on the lock which when moved prevents the interior switch activating the boot lock. If you fit the STi Spoiler you will also need the beefier torsion bars that raise the boot.
The boot badges may be different but the hole for the boot lock is square and not round like the Blob. There is a Subaru supplied OE new Hawkeye boot lid on eBay for £36 - item number 201419630081. I couldnt get the torsion bars as the seller said it was to hard to remove them and i didnt need them.. i did say i needed them but he said they were the same... the boot doesnt half slam shut now! i may have to try and get some.. how hard are they to remove? I have the 05 blob boot with the square lock, i have swapped my lock over and it all fitted fine, i can open it with my key but not the interior boot lever and it just catches a little, im going to try and tweak it some more. |
Originally Posted by Sarg400
(Post 11731898)
I've got a 2005 sti bootlid in 48w with the square lock if need
thanks matty |
sorry mcGoo I haven't
|
I fitted an STI spoiler on my WRX, I replaced both of the torsion bars and the boot flew open, I now have 1 standard and 1 uprated bar fitted and the boot feels like it should :thumb:
|
Originally Posted by BoozyDave
(Post 11734166)
I fitted an STI spoiler on my WRX, I replaced both of the torsion bars and the boot flew open, I now have 1 standard and 1 uprated bar fitted and the boot feels like it should :thumb:
|
Yes, it's a genuine blob sti spoiler.
when I pulled the boot release lever the boot flew open and nearly hit the back window. I was dubious fitting one of each at first, but I had to try it and it works well |
Its good to hear that you guys have got your blob boots to work on the hawk, i havmt had time to try and adjust my boot yet as ive been fitting my HSD's
I have spoken to the guy i got my boot of and hopefully he will be taking the torsion bars off and will send them to me so I will adjust the boot after that. |
| All times are GMT +1. The time now is 09:19 PM. |
© 2024 MH Sub I, LLC dba Internet Brands