ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   ScoobyNet General (https://www.scoobynet.com/scoobynet-general-1/)
-   -   Is this good Boost (https://www.scoobynet.com/scoobynet-general-1/1028246-is-this-good-boost.html)

scoobyman2007 11 August 2015 06:40 PM

Is this good Boost
 
Just put my defis in my 95 and she is running 1.0 to 1.2 standard no mods to engine yet is this ok

Boostin 11 August 2015 07:02 PM

What model is it dude?

scoobyman2007 11 August 2015 07:57 PM

Sorry was told it was a wrx log is saying gl mate thinks it's a sti

Boostin 11 August 2015 09:48 PM

So you don't fully know what model it is then mate? I remember reading a while back that the turbo 2000's run 0.7bar as standard, sti's were at 1.0bar if memory serves. Wrx' will be in-between them somewhere. Don't take this as Gospel though buddy as im no expert. Best bet would be to call a impreza specialist tuner and ask them. Or take it in and let em check it over.

riiidaa 11 August 2015 10:47 PM

We can safely say it is not a GL, sounds like a JDM - engine bay and vin plate should reveal what it is

scoobyman2007 11 August 2015 11:26 PM

I no its not a gl vin code i for wrx she has a z4 ecu and a tdo5 but it's the boost that is making me think it's not a wrx as that's good for standard

JDM_Stig 12 August 2015 06:57 AM

td05 is wrx . .

MattyB1983 12 August 2015 09:00 AM

You can't tell which model it is by how much boost it makes....lol..

Put the applied model code up along with a couple of pictures.

mickywrx 12 August 2015 07:38 PM


Originally Posted by scoobyman2007 (Post 11722957)
Sorry was told it was a wrx log is saying gl mate thinks it's a sti

I hope for your sake it's insured correctly.

scoobyman2007 12 August 2015 11:38 PM


Originally Posted by mickywrx (Post 11723331)
I hope for your sake it's insured correctly.


Yes mate I told them it was not a gl it was a wrx or a sti and thay put it as a wrx

stevebt 14 August 2015 10:11 PM

1.2bar is ok but mt turbo runs mans boost and its 2.3bar billet 35r :D

MattyB1983 14 August 2015 10:57 PM


Originally Posted by scoobyman2007 (Post 11723470)
Yes mate I told them it was not a gl it was a wrx or a sti and thay put it as a wrx

So what happens if it turns out to be a STI and you have a smash ?
You think the insurance company would back you up......... Nope.

You're asking if you have a STI because the car make 1.2 bar of boost :freak3: just put up the applied model code and some pics and I'm sure we'll be able to tell

scoobyman2007 15 August 2015 03:58 PM


Originally Posted by MattyB1983 (Post 11724222)
So what happens if it turns out to be a STI and you have a smash ?
You think the insurance company would back you up......... Nope.

You're asking if you have a STI because the car make 1.2 bar of boost :freak3: just put up the applied model code and some pics and I'm sure we'll be able to tell



No mate I was asking if 1.20 bar of boost it good for a standard 95 Impreza

MattyB1983 15 August 2015 04:15 PM


Originally Posted by scoobyman2007 (Post 11724396)
No mate I was asking if 1.20 bar of boost it good for a standard 95 Impreza

Good, in what way...... 1.2 bar is more than it would of made from the factory.

scoobyman2007 15 August 2015 04:29 PM

That's what I don't get y is it as its standard is it good or bad

MattyB1983 15 August 2015 04:43 PM


Originally Posted by scoobyman2007 (Post 11724405)
That's what I don't get y is it as its standard is it good or bad

Who knows why, could be a number of things.
A little more boost over standard isn't the end of the world on an early car to be honest.

JDM_Stig 15 August 2015 05:11 PM

Why not just stick the applied code up and know for sure what it is ?

scoobyman2007 15 August 2015 05:50 PM

I have checked it and it's a wrx

Bob Rawle 20 August 2015 02:24 PM

Defi boost gauge reads about 0.15 bar high, so its reading about right, early cars were 0.9 bar

bob


All times are GMT +1. The time now is 08:47 AM.


© 2024 MH Sub I, LLC dba Internet Brands