SC38 turbo question?
 

Hi guys, recenty bought a modded 2006 (Blob) Type UK DCCD, I was lead to believe it had a SC38 turbo, the housing of the Turbo says Blouch? Do SC use a blouch housing with their internals or have I simply not got a SC38 and have a Blouch instead? If I haven't got what was advertised I will be asking questions. AL.

blouch make them to clinic specs matey

So all SC38s will have Blouch cast into the housing yes? I had no reason to doubt the seller as everything else checks out fine.

https://cimg2.ibsrv.net/gimg/www.sco...39ae42e7e9.jpg


the bigger ones are garret, may be some slight varations on the logo though

Yep, that certainly looks like mine. Many thanks.

no bother, if theres any doubt can always run it up to them for a look see, have youg to any paperwork to go with it?

Unfortunately no paperwork on the turbo but was remapped by Bob Rawl 386bhp @ 1.4 bar with printout, decat, RCM wrapped headers, exhaust, RCM induction filter, wahlbro 255 pump, Certainly goes very well.

Sounds bang on numbers for sc38 :)

Sc38 is 7cm housing when blouch 8cm , blouch will do more power but spool is better on sc38
Its possible You could have blouch with 7cm housing

Even the bigger SC turbos are Blouch, like my SC46 billet. I'm sure no tuning specialists in the UK actually manufacture their own turbos, although they probably have them made to their own spec.

sc46 isn't that big in the grand scheme, theres various gt30/gt35 etc that are billet, although they may not have an SC designation thinking about it.

I believe the SC46 is the largest of the Blouch 'bolt on' SC designated turbos, the bigger turbos are Garrett and require a rotated set up.

SC50?

not sure what the sc50 is based on tbh, also not even sure if that one is still going lol

All changes as they develop