My NA Impreza project
9 Attachment(s)
Hi all, been knocking about Scoobynet for a while now and thought it was about time I started my own project thread.
99% of you probably won't be interested in my car due to the fact it's a non turbo but I'm proud of my car and have lots of plans. I don't like doing things by the book and enjoy fabricating my own parts and modifications to make my cars look unique. I've owned a few civics and a pulsar in the past but this blows them all out the water. So this is how it stood when I bought it. I got it for £600 as the bottom end had gone. The body on the car is excellent with very little rust. Attachment 47604 And it's journey home Attachment 47605 Attachment 47606 Got it home and gave it a good clean inside and out, it was disgusting and neglected to hell. Attachment 47607 Attachment 47608 So first thing was my new engine. The Scooby was sent to Chris Byrne @ Performance Northeast in Sunderland. Just as a little side note, I can't recommend Chris enough for any work you want doing on your Impreza. He knows them inside and out and has a great reputation around here. If anyone would like his contact details please get in touch. Attachment 47609 Attachment 47610 Attachment 47611 Attachment 47612 |
Looks Good,whats your future plans?Anyway N/A project something a bit different Subscribed:thumb:.SJ.
|
2 Attachment(s)
After the car got home I started to think about how I want it to look. First thing I decided I wanted to change was my yellow fog lights for a set of fog light covers. I put them on eBay and someone contacted me wanting to swap his covers and £40 for my fog lights, result!
So they arrived and I couldn't help but laugh, some people shouldn't be allowed near subarus lol! Attachment 47585 After I peeled the stickers off and fit them to my car I realised the colour was well off. They were silver underneath but past saving so I've sanded them down ready for the paint arriving on Monday :) Relocated number plate ready for my next couple of modifications I've got planned. Attachment 47586 Browsed a couple of number plate deletes online (Perrin and Grimmspeed) and came to the conclusion that for what they were their really overpriced and rarely available in the UK so would of cost me even more to ship over here. I'm getting a small strip of black acrylic cut to the size of where my number plate was (370 x 50 mm), drilling my own holes and adding a design to it. With the fog light covers my front end will be well on its way to being finished :) Plans are: Fit number plate delete Paint, fit fog light covers and add custom sticker to the LH cover Bonnet scoop (undecided on which one) Twisted side skirts New spoiler Refurbish and paint wheels Zunsport front grills And that's all for now :) Thanks for reading. |
Originally Posted by stonejedi
(Post 11689734)
Looks Good,whats your future plans?Anyway N/A project something a bit different Subscribed:thumb:.SJ.
|
3 Attachment(s)
Front end is looking nice now really pleased with it :) I painted the fog light covers myself, added a sticker, made myself a custom number plate delete and relocated my number plate. Needs a grille set to finish it off and it'll be looking sweet.
Attachment 47266 Attachment 47267 Attachment 47268 |
Subscribed, bargain car!
Number plate relocation... But still keeping NA... Curious as to what's going to be the next steps if not FMIC :wonder: :D |
How have you relocated the plate, or is it just screwed into the bumper.?
|
5 Attachment(s)
I swapped my yellow fog lights for some fog covers in silver and £40 cash. The lad told me they had a hole drilled where a tow hook was fitted but we're silver under the hideous stickers:
Attachment 47261 However, when I peeled the stickers off I realised it wasn't drilled, instead hacked with what looked like a knife and the colour wasn't a match at all. It actually looked like he'd sanded them down ready for paint then couldn't be arsed to carry on: Attachment 47262 So my options were to get it repaired and sprayed or relocate my number plate and use the hole to make a bracket for it. So I went with the second option :) Sprayed them myself using some 01G paint I got mixed and I couldn't be happier with the outcome :) Attachment 47263 Attachment 47264 Attachment 47265 So far every piece on the car I've either made myself or had some unique input on it. The work definitely pays off, love it when ideas come together :) |
1 Attachment(s)
Originally Posted by Cpt Jack Sparrow
(Post 11692402)
How have you relocated the plate, or is it just screwed into the bumper.?
Attachment 47260 Only instead of the full back plate it's one piece of metal going diagonally. |
Originally Posted by AWG
(Post 11692393)
Subscribed, bargain car!
Number plate relocation... But still keeping NA... Curious as to what's going to be the next steps if not FMIC :wonder: :D |
i thought u meant wen u were doing a numberplate delete you would of cut of the part that the plate bolts to then smoothed it off aint really a numberplate delete then you have just moved it and tbh numberplate sticks out to much now sorry just my opinion
|
Everyone's entitled to their own opinion dude no need to apologise.
No, when I said "number plate delete" I meant I was making a custom one. If you search on google you'll see that is what their called. Usually plastic or metal plates that go where the number plate was but their name is "number plate deletes" even though, like you have pointed out your not really deleting the plate just moving. |
11 Attachment(s)
Got to work on my grill and bumper today ready for the honeycomb black mesh I've ordered.
First up was the grill: Attachment 47119 Used a hacksaw to cut the middle part out: Attachment 47120 Cardboard template made for the mesh: Attachment 47121 After sanding down I was left with bits of rough plastic all over. Took some sandpaper to it. Took a fair bit of elbow grease but well worth it: Attachment 47122 Attachment 47123 Had to fibreglass a few holes that you can't avoid making when cutting the grill out (believe me, I tried my best to avoid making them!) Attachment 47124 Quick sand down of them too and the whole thing was smooth as glass. Ready for primer, paint and laquer when it's delivered. Next was to pull the bumper off. When doing so I realised the previous owner has already had it off and smashed most the clips so I've ordered a few new ones. Attachment 47125 Attachment 47126 There's no easy way to get a hacksaw in that bumper! My arms are torn to bits off squeezing them in spaces to get my saw in. You've just got to hack little bits off wherever you can. Takes ages but eventually you wear it down: Attachment 47127 Attachment 47128 When I reached this stage I was able to turn the saw on its side properly and go around the whole edge. Took some sandpaper to it after to finish it off: Attachment 47129 Looks like a simple thing to do and it is but it's a time consuming process. It took me from 9am until tea time. Patience definitely paid off. Looking forward to adding my mesh now :) |
Its a lot easier to cut the bumper with an angle grinder fitted with a slitting disk. That's the way I cut mine for the front mount... bit late for that advice now though haha.
|
Haha that would of been a lot easier, then again I probably wouldn't have access to one anyway. I tried squeezing a jigsaw in there but it's no better than the hacksaw. The angle was all off.
|
6 Attachment(s)
Finally found the mesh I wanted for my grills after scouring the net for hours. There's a lot of ugly mesh out there, I had to pay a little more than originally planned but ended up with a lovely looking black aluminium mesh.
First was to prime and spray my upper grill. Paint went on great and looked ace after. Attachment 46172 Attachment 46173 Attachment 46174 Attachment 46175 Got a whole load of new screws and clips to put the bumper back on properly. It's rock solid now and attached the way it should be! Decided to go for a pink Subaru badge because of the black grills. Needed something that would stand out. Attachment 46176 Attachment 46177 The pictures don't do it justice it looks a million times better in the flesh. Had nothing but compliments about it all day :) Used tiger seal to attatch both meshs and a little tiger seal on the back of the badge. That stuff is awesome by the way and well worth the money. It still stays squidgy when it's dry so that your grill can have a little movement (going over speed bumps etc) without the glue cracking. Not sure what I want to do next, the wheels are in dyer need of a refurb but I'd also like to get a pair of sti side skirts. |
Dont meen to put a downer on your project mate but just seems strange to me you went threw all that effort of debadging your grill but then stuck a bright pink badge back on :wonder:
|
I wasn't debadging the grill buddy, just bringing it up to date with the mesh. It was either mesh it myself or buy an sti grill with the mesh, no brainier really.
|
Ah rite what mest did you use mate? Id like to redo mine to make my supertones even more stealthy :norty:
|
Originally Posted by south_scoob
(Post 11703803)
Ah rite what mest did you use mate? Id like to redo mine to make my supertones even more stealthy :norty:
|
Originally Posted by south_scoob
(Post 11703803)
Ah rite what mest did you use mate? Id like to redo mine to make my supertones even more stealthy :norty:
|
Can't make my mind up if i like what you have done or not, will keep on watching
|
Cheers and hopefully my future plans will sway you over to the like side :)
|
Whens the FMIC going on?
|
Originally Posted by ScottyPPP
(Post 11704176)
Whens the FMIC going on?
|
I think it would look better with the number plate in standard place. I'd think about getting your side skirts colour coded and lowering it next.
|
I like the bumper man, good work. Looks much cleaner. I also like the prodrive plate cover.
|
4 Attachment(s)
Cheers buddy. I'm going for a good clean look all round and I want something a little different. 99% of all scoobies have the same exterior mods and I find it a little boring. The ideas didn't come overnight and took a couple of months to plan but I love the way it's come out.
Took a few close up pictures of my new grills for anyone that's interested :) Attachment 46106 Attachment 46107 And my top grill, ignore the marks its dust from works car park. It's a nice smooth gloss black underneath:) Attachment 46108 And a before and after shot.. Attachment 46109 |
4 Attachment(s)
Had an early start this morning and thought I'd take advantage of the sunrise we had after a few days of heavy rain here in the North East..
Attachment 46023 Attachment 46024 Attachment 46025 And the full moon.. Attachment 46026 |
1 Attachment(s)
|
All times are GMT +1. The time now is 12:46 AM. |
© 2024 MH Sub I, LLC dba Internet Brands