my hatchback Sti 330s (531bhp)
3 Attachment(s)
after owning this hatchback sti 330s for about 6 months now i thought it was about time i did a thread to show whats been done over that time
it came with a few mods like the forged engine and wheels but the rest iv done myself with the help of a couple of close friends 330s,, 2009 ,keyless entry and keyless start (so just leave them in your pocket ) plus a few other bits I'm still finding out about lol Fully forged engine , wossner pistons , Carrillo rods , closed deck inserts , acl bearings , 2ltr sump and pick up , 14mm head studs , 12mm oil pump , Forced performance red turbo (none billet) standard postision Forced performance 84mm inlet pipe Forced performance turbo oil feed TGV delete and air pump delete HRC 340 fuel pump Asnu 800cc injectors GT spec 3 bolt headers coloured white 3" japspeed exhaust Teg sport custom made front mount intercooler (sprayed with perrin logo) RCM 80mm indutcion kit & custom 80mm maf housing Classic 3 post boost solenoid Perrin 4bar map sensor Defi link display , oil pressure , oil temp and boost ,, will also do water temp , exhaust temp , speedo , and a few other bits once the other senders are brought Separate defi boost gauge Perrin strut brace Perrin rad shroud Perrin brake cosy Perrin boost selonoid cover Perrin rear wing risers Perrin SI drive cover Perrin stubby aerial Perrin number plate relocation Perrin battery clamp Perrin alternator cover Perrin radiator stays Perrin number plate delete plate Jdm roof vent Team heko wind deflectors Carbon v-style Front splitter Rear diffuser Rear light overlays small race style battery Racerom with launch control ,flat foot shifting and auto blip mapped by bob Power is currently 531bhp @1.75bar ,, 515 torque Rota grid 18" x 8.5 &Goodyear f1 tyres D1 spec wheel nuts AP front calipers 365mm & rears painted to match Matching pair of Carbon bride stradias 2 seats Damd flat bottom steering wheel Cherry red sti gear knob Cherry red stop start button Flocked dash and dash trim sprayed black Crinkle black engine bay parts Daylight driving lights (disconnected) Red pin stripe details , amp Adapter and nos bottle style sub in boot Sti carpets Mirror matic Automatic folding mirror upgrade Privacy glass Private 555 number plate Hella style horns dont have many pics but here she is Attachment 59131 Attachment 59132 Attachment 59133 https://cimg1.ibsrv.net/gimg/www.sco...dcd69e67bf.jpg https://cimg1.ibsrv.net/gimg/www.sco...cb5c4028b6.jpg https://cimg2.ibsrv.net/gimg/www.sco...ec0f17ccc5.jpg |
Looks really good mate and good spec. Any chance of a side profile please? I'm particularly interested in what the Grids look like on a hatch. Thanks
|
nice dash top
|
1 Attachment(s)
Originally Posted by Benji554
(Post 11646912)
Looks really good mate and good spec. Any chance of a side profile please? I'm particularly interested in what the Grids look like on a hatch. Thanks
Only one iv got of the side is this one from when I first brought it Attachment 59134 |
Originally Posted by riiidaa
(Post 11646913)
nice dash top
|
Originally Posted by domino46
(Post 11647002)
Cheers mate
Only one iv got of the side is this one from when I first brought it http://i181.photobucket.com/albums/x...psa666b0e6.jpg |
Loving the red bits, giving me ideas! :)
|
Originally Posted by domino46
(Post 11646855)
after owning this hatchback sti 330s for about 6 months now i thought it was about time i did a thread to show whats been done over that time
it came with a few mods like the forged engine and wheels but the rest iv done myself with the help of a couple of close friends Fully forged engine , wossner pistons , Carrillo rods , closed deck inserts , acl bearings , 2ltr sump and pick up , 14mm head studs , 12mm oil pump , TGV delete and air pump delete HRC 340 fuel pump ported headers 3" japspeed exhaust Teg sport custom made front mount intercooler (sprayed with perrin logo lol) Billet vf48 Indutcion kit Classic 3 post boost solenoid Defi link display , oil pressure , oil temp and boost ,, will also do water temp , exhaust temp , speedo , and a few other bits once the other senders are brought Separate defi boost gauge Perrin strut brace Perrin rad shroud Perrin brake cosy Perrin boost selonoid cover Perrin rear wing risers Perrin SI drive cover Perrin stubby aerial Perrin fuel rails ( still need fitting) Perrin number plate relocation Perrin battery clamp Jdm roof vent Front splitter (currently being resprayed) Rear diffuser Rear light overlays Racerom with launch control ,flat foot shifting and auto blip mapped by bob rawle Running 397bhp 443lbft @ 1.5bar Rota grid 18" x 8.5 &Goodyear f1 tyres D1 spec wheel nuts AP front calipers 365mm & rears painted to match Matching pair of corbeau bucket seats Damd flat bottom steering wheel Cherry red sti gear knob Cherry red stop start button Flocked dash and dash trim sprayed black Crinkle black engine bay parts Daylight driving lights (disconnected) Red pin stripe details front and rear Kenwood double din , amp & slim line sub in boot Sti carpets Mirror matic Automatic folding mirror upgrade Privacy glass Private 555 number plate as always there is still more to do parts waitng to be fitted fuel pressure reg 800cc injectors bigger induction kit 3 bolt headers forced performance red turbo dont have many pics but here she is http://i181.photobucket.com/albums/x...pssfbh1bwj.jpg http://i181.photobucket.com/albums/x...ps3yagphhn.jpg http://i181.photobucket.com/albums/x...psq85rvtsz.jpg http://i181.photobucket.com/albums/x...psjx78gzgc.jpg |
Originally Posted by thenewgalaxy
(Post 11647156)
Lovely car, choice mods. Bet that's a fantastic road car.
|
starting to want a hatch!! very nice
|
Originally Posted by beef-on-the-bone
(Post 11647196)
starting to want a hatch!! very nice
|
Very nice :thumb:
What's the japspeed exhaust like, thinking of fitting one during my engine rebuild. Is it very loud or just bassy? How much fettling was involved with fitting those seats? I could be tempted..... |
Originally Posted by fatboy_coach
(Post 11647503)
Very nice :thumb:
What's the japspeed exhaust like, thinking of fitting one during my engine rebuild. Is it very loud or just bassy? How much fettling was involved with fitting those seats? I could be tempted..... |
2 Attachment(s)
Just got my forced performance red housing polished by a chap local to me , he only charged me £25 which I thought was a bargain and looks awesome ,, won't be fitting it just yet as got other things to do first
Attachment 59148 Attachment 59149 |
Originally Posted by domino46
(Post 11647004)
Thanks , I think it looks loads better than the original :thumb:
|
Originally Posted by smi2ml
(Post 11649651)
Do you still have the original recaros ?
|
can't believe you'd swap the recaro for the fixed seat.. and why did you swap the head unit?
|
Originally Posted by salsa-king
(Post 11650467)
can't believe you'd swap the recaro for the fixed seat.. and why did you swap the head unit?
As for the stereo iv still got the original unit but mine does far more and I can control my phone and charge it via my headunit it unlike the original one |
Domino46 where did you get the vf turbo billet conversion?
|
Originally Posted by InTurbo
(Post 11651017)
Domino46 where did you get the vf turbo billet conversion?
|
2 Attachment(s)
Ended up changing the rear light overlays to ones with tinted indicators as mine were left red before ,, and went badgeless on the grill , I know some don't like this look but I like it :thumb: , and done a perrin number plate delete
Attachment 59150 Attachment 59151 |
Originally Posted by domino46
(Post 11659679)
Ended up changing the rear light overlays to ones with tinted indicators as mine were left red before ,, and went badgeless on the grill , I know some don't like this look but I like it :thumb: , and done a perrin number plate delete
http://i181.photobucket.com/albums/x...pswtga9ud0.jpg http://i181.photobucket.com/albums/x...ps56q1udib.jpg |
Originally Posted by smi2ml
(Post 11659686)
How much did you get for the recaros by the way? I really want a set but can't find a used set anywhere lol
|
A few more parts have been swapped now
Forced performance red turbo has now been fitted (hoping for 450) Forced performance 84mm inlet pipe 80mm induction kit and maf housing GT spec headers Front mount now plumbed in Battery relocated to boot to make room for a swirl pot but this was done after the pics lol https://cimg3.ibsrv.net/gimg/www.sco...9e009d4fff.jpg https://cimg4.ibsrv.net/gimg/www.sco...efe827722c.jpg |
I really like it overall, though just a bit too much red on the rear for me. There is just something about that pinstripe that's really bugging me....
Love the FMIC and interior. Bet she's lovely to drive. |
Originally Posted by 8ulldog
(Post 11695330)
I really like it overall, though just a bit too much red on the rear for me. There is just something about that pinstripe that's really bugging me....
Love the FMIC and interior. Bet she's lovely to drive. |
It looks fantastic, only thing I would change would be the rear, seems to be a bit too much going on. Bar that, lovely, lovely motor!
Matt. |
Where did you get your perrin plate relocation from? I've been looking for one for a while now
|
Originally Posted by 8ulldog
(Post 11695330)
I really like it overall, though just a bit too much red on the rear for me. There is just something about that pinstripe that's really bugging me....
Love the FMIC and interior. Bet she's lovely to drive. but looks good otherwise |
Originally Posted by Lora-x
(Post 11699718)
Where did you get your perrin plate relocation from? I've been looking for one for a while now
From the states , ebay.com |
All times are GMT +1. The time now is 06:17 AM. |
© 2024 MH Sub I, LLC dba Internet Brands