ScoobyWorx Demo Car "COLOSSUS"
We have recently done some more work to the demo car and also decided to give it a name.
It now project "COLOSSUS" Meaning : a thing of enormous size, importance, or ability We now have make sure it lives upto its name :) There is a thread we did before from previous years which i will list below. Some are a bit all over the place but there is plenty of what we did over the last 3 years. Here is how it was when we bought it back in 2011, i had painted the bonnet center , and also painted the gold wheel anthracite but other than that as it was. http://i779.photobucket.com/albums/y...0GALLERY/1.jpg I then did a full strip and paint which took it to this. http://i779.photobucket.com/albums/y...Y/674bfd2f.jpg http://i779.photobucket.com/albums/y...ps5d76f255.jpg You can see more of the work in more detail here: https://www.scoobynet.com/projects-4...ar-2014-a.html We have now done some work on the engine bay https://i779.photobucket.com/albums/...Y/IMG_3386.jpg http://i779.photobucket.com/albums/y...Y/IMG_3387.jpg http://i779.photobucket.com/albums/y...Y/IMG_3401.jpg http://i779.photobucket.com/albums/y...Y/IMG_3400.jpg http://i779.photobucket.com/albums/y...Y/IMG_3398.jpg http://i779.photobucket.com/albums/y...Y/IMG_3396.jpg |
We now have some freshly powdercoated parts back :)
http://i779.photobucket.com/albums/y...Y/IMG_3522.jpg http://i779.photobucket.com/albums/y...Y/IMG_3523.jpg |
Had a little bit of progress this week..............
Started powder coating all the small brackets parts from the engine bay, also bought in marine grade stainless bolts to replace all the rusty ones which have been removed http://i779.photobucket.com/albums/y...Y/IMG_0022.jpg http://i779.photobucket.com/albums/y...Y/IMG_0021.jpg http://i779.photobucket.com/albums/y...Y/IMG_0035.jpg https://i779.photobucket.com/albums/...IMG_0036-1.jpg https://i779.photobucket.com/albums/...Y/IMG_0037.jpg https://i779.photobucket.com/albums/...Y/IMG_0039.jpg https://i779.photobucket.com/albums/...Y/IMG_0041.jpg |
3 Attachment(s)
Been a while on this again..........
But i now have a young apprentice helper :) Progress has definetly started again. We have started removing everything from the underneath of the car ready to prep for a fresh coat of sealer underneath. I didnt want to seal over everything or around anyhting so a bare shell is what we will work with. Its a perminant sealer the same as what dealers use non of the sticky underseal rubbish that is applied in the aftermarket that while does protect the underneath is just a messy product i cant stand myself. Ours is a rubbery to touch fully curing coating which looks clean and fresh :) More pics will follow. Attachment 44563 Attachment 44564 Just the tank to drop and a few brake lines left. Then all wil be sanded rust treated and etch primed :) Attachment 44565 |
subscribed
|
Lookin good ......
|
ScoobyWorx Demo Car "COLLOSUS"
Nice :)
Subscribed |
Nice to see a bigeye getting some quality love. :)
|
3 Attachment(s)
Tank is now off
Attachment 44437 Underneath isnt in bad condition to be fair not much rust for a car thats 14 years old Attachment 44438 Suspect brake pipes thought that will need replacing Attachment 44439 |
8 Attachment(s)
Had a colour Scheme change and some progress over last few weeks :)
The tank has been reconditioned :) Attachment 43263 Attachment 43264 We then decided on painting the inside and changing the colour as we went :) Attachment 43265 Attachment 43266 Attachment 43267 Attachment 43268 Attachment 43269 Attachment 43270 |
13 Attachment(s)
Finally more progress :)
and this time it seems like a good bit of progress too. Underneath and engine bay sealed and painted :) Attachment 41649 Attachment 41650 Attachment 41651 Attachment 41652 Attachment 41653 Attachment 41654 Attachment 41655 Attachment 41656 Attachment 41657 Attachment 41658 Attachment 41659 Attachment 41660 Just had one bit react and lift due to solvent which i can do a localized repair on later Attachment 41661 |
Looking good, is that colour Seat Leon Mandarin?
|
Nice colour!
|
Originally Posted by zx10dazza
(Post 11748694)
Looking good, is that colour Seat Leon Mandarin?
|
it's looking bad ass already - can't wait to see the finished work! What's the plan for what lives under the bonnet then?
|
Originally Posted by bludgod
(Post 11748713)
it's looking bad ass already - can't wait to see the finished work! What's the plan for what lives under the bonnet then?
|
4 Attachment(s)
Been a while since we have updated this thread. So here goes............................
We wanted to upgrade the rear ARB mounts and went for a Perrin Stout Mount. Excellent quality and looks nice behind the wheel as well. We found that the clamp which holds the ARB bush in place was thicker as the Perrin bushes supplied were around 4mm wider. Now we were using SuperPro bushes (as they are our sponsor) so i have to machine the brackets down 2mm off each side then powder coat them Attachment 35944 Machined and coated ready to fit Attachment 35945 Rear Suspension built back up, SuperPro ARB, Drop-links and Bushes. Perrin Stout Mounts with Modified Clamps for SuperPro Bushes. We found no bushes were available for the rear subframe from either Subaru or aftermarket manufactures so we did a tech drawing of what was needed and had them made ourselves. (SWRD REAR SUB FRAME BUSHES NOW AVAILABLE ON OUR WEBSITE) Powder coated Hubs and New Bearings also added. Attachment 35946 Also gave the Brembo's a flash of new colour. Going to be running K-Sports eventually but these will suffice for now Attachment 35947 |
Looking good!
|
Subscribed!
|
https://cimg5.ibsrv.net/gimg/www.sco...da4b1dcd06.jpg
Progress coming soon on the demo car. Booth now installed :) |
https://cimg7.ibsrv.net/gimg/www.sco...3ee9300ff2.jpg
Just before the booth was installed we also had a mezzanine floor installed to extend our stockroom |
A lot of Subarus passing through the village lately, are you getting busier?
|
Originally Posted by RS_Matt
(Post 11856299)
A lot of Subarus passing through the village lately, are you getting busier?
|
Some progress finally getting some paint laid
https://cimg8.ibsrv.net/gimg/www.sco...7e05114aa6.jpg Demo car finally rolled into the booth for some colour https://cimg9.ibsrv.net/gimg/www.sco...076a6efbbf.jpg We are using the Max Meyer Aqua Max Water Based scheme whcih we have in house. First coat applied of H8R https://cimg1.ibsrv.net/gimg/www.sco...67701c1740.jpg Second coat https://cimg2.ibsrv.net/gimg/www.sco...faba1469be.jpg After 5 coats of base and 3 Coats of clear https://cimg3.ibsrv.net/gimg/www.sco...36dc19f420.jpg Unmasked and looking sweet https://cimg5.ibsrv.net/gimg/www.sco...5d335e2e1a.jpg Iwata Supernova best paint gun around. I have 3 of these :) |
https://cimg1.ibsrv.net/gimg/www.sco...aef2c76726.jpg
Passenger side doors and wing in primer and been prepped for paint https://cimg2.ibsrv.net/gimg/www.sco...650242df0d.jpg First coat of base applied https://cimg4.ibsrv.net/gimg/www.sco...b6e6b21924.jpg one cost over black primer |
https://cimg7.ibsrv.net/gimg/www.sco...de9441b9cb.jpg
Im literally watchin paint dry hence the pic updates. Final full coat of base applied. Once this has dried then a drop coat and on with the clear. |
awesome colour, like it a lot.
|
|
WOW. How did I miss this thread? Great work there mate. Love the new colour. Very nice indeed.
|
Originally Posted by BrownPantsRacing
(Post 11869623)
WOW. How did I miss this thread? Great work there mate. Love the new colour. Very nice indeed.
Our engine has gone down to EngineTuner for building as well so should be all coming together for next years show season :) |
All times are GMT +1. The time now is 05:35 PM. |
© 2024 MH Sub I, LLC dba Internet Brands