ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Engine Management and ECU Remapping (https://www.scoobynet.com/engine-management-and-ecu-remapping-453/)
-   -   2008 sti ringland failure costs (https://www.scoobynet.com/engine-management-and-ecu-remapping-453/1011279-2008-sti-ringland-failure-costs.html)

parteepro 06 September 2014 06:39 PM

2008 sti ringland failure costs
 
Hi guys

Today I had the bad news that my car has got the dreaded ringland failure, I had spent a bit on the car already, ie remap etc....

My problem is what to do garage has quoted £3200 plus vat to have forged pistons in and to get it in top form.

Is this a fair price or can it be done cheaper, do I sell the car now or have the work done.

If you have been in a similar position can you tell me the outcome and costs involved how did the car perform after the work.

Your guys are always helpful so help me out please

My car was a new age 2008 sti 65000 paid £11750 5 months ago

To say I'm gutted is an understatement

piehole1983 07 September 2014 09:30 AM

Not that I've had to fork out for anything like that yet, it sounds pretty expensive to me. Have a shop around. I'm sure there are guys on here that can and will recommend an engine builder for much less than that. Sit tight and wait for them to come along.

MOTORS S GT 07 September 2014 10:19 AM

The Hatch ringland failure is well documented, on here & if you Google it, I presume you bought the car without this knowledge to say your gutted about it.

As for price you have been quoted, that is a very fair price if the engine is being completely stripped & pistons honed to bores, & not dropped into existing bores, as thats a bodge that rarely works, also at 65,000 miles there will be valve work required on 2.5's, especially the exhaust's, so if that has not been included your quote will rise.

parteepro 07 September 2014 02:15 PM

Here is the quote
Option 2 - Stage 1

Modified Oil Pump
ACL Race Bearing Kit
Genuine Cambelt Kit
Genuine Engine Gaskets
Cosworth 0.78mm Head gaskets
Cosworth 11mm High Tensile Stud Kit
Mahle Forged Piston Set
Mahle Ring Set
Fluids & Filters
Bore & Hone
Labour
Running In Map
Oil & Filter @ 1000 miles

£3260.00 + VAT

A running in map will be installed on the vehicle, 1000 miles will need to be completed before a full remap can be carried out at a cost of £300.00


If you know of local subaru specialists in my area , Birmingham can you pm me please I am serious about getting the work done

MOTORS S GT 07 September 2014 03:11 PM

Nothing wrong with that quote.

beliblisk 07 September 2014 03:59 PM

For 5k there is one decent 2,35 for sale.I guess you can offer 4k and see how it goes:)

MOTORS S GT 07 September 2014 04:43 PM


Originally Posted by beliblisk (Post 11509280)
For 5k there is one decent 2,35 for sale.I guess you can offer 4k and see how it goes:)

Heads are of no use to the op, there dual avc's on Hatch STI's.

piehole1983 07 September 2014 08:02 PM

I guess I underestimated the cost of a rebuild!

beliblisk 07 September 2014 08:30 PM


Originally Posted by MOTORS S GT (Post 11509306)
Heads are of no use to the op, there dual avc's on Hatch STI's.

Uf i forgot abou that.My bad and thanks for correcting me.

OP...you can always try buying parts for rebuild seperatly and than pay 1k for install.If you wish further details send PM.


All times are GMT +1. The time now is 02:33 AM.


© 2024 MH Sub I, LLC dba Internet Brands