Boosting problem
Hi my 1996 series mcrae is having a boost problem I have done a flash test an rest the ecu a few times now I have changed knock sensor rest ecu changed maff rest ecu an now got fault code 45 map sensor which I have tried 3 on an rest ecu but car boosts to around 3500 to 4000 rpm then cuts boost as if in safety mode an still have code 45 could all 3 map sensors not work or is somethink else up thanks
|
Maybe the MAP sensor is just registering a higher than allowed reading - i.e. might not be faulty, might just be doing its job? Could there be something causing it to boost too much. Can't be the waste gate/boost solenoid as that's obviously working. Hmm..
|
U might b onto somethink as when I first pull off it boosts fine twice then won't boost properly from then on looks like iv got more investigating to do
|
No don't think it's missing but what could it be if it was as willing to try anythink to try sort it
|
You say boost cuts off at 3 to 4k? Cuts off like no boost at all or trys to boost periodically?
|
Cuts compleatly u go forword in ur seat
|
It's cutting the fuel due to too much boost pressure. Mine was doing this before, leaking vacuum lines were to blame.
|
Thanks will take a look at all the hoses to try sort it
|
Would a apexi avcr sort this out thanks
|
All times are GMT +1. The time now is 05:54 PM. |
© 2024 MH Sub I, LLC dba Internet Brands