ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Member's Gallery (https://www.scoobynet.com/members-gallery-5/)
-   -   Smurf's Scooby (https://www.scoobynet.com/members-gallery-5/1006469-smurfs-scooby.html)

SmurfyBhoy 04 April 2016 09:01 PM


Originally Posted by MATT93 (Post 11816970)
I had a TD05-20G on my last STI, It was a little laggy but nothing a downshift wouldn't sort out! And as you say when they get going its more than worth it!

Matt.

Couldnt find a decent 20g.
All chinese ebay ones that came up.

Reckon i need a stroker to get most out of this one.

MATT93 06 April 2016 02:33 PM


Originally Posted by SmurfyBhoy (Post 11817069)
Couldnt find a decent 20g.
All chinese ebay ones that came up.

Reckon i need a stroker to get most out of this one.

I was lucky to find a Zenperformance TD05 for sale on here, think it was about £420/50od . Done the job rightly.

Ha, 'need' sure you may as well! What else would you do with a couple of ££££ lol.

SmurfyBhoy 17 November 2016 02:31 PM

HAd the car back at ecotune's dyno to see the gains on there dyno as it's always lower than the road dyno estimate,

Turns out i'm not in the 400bhp club,

Will be soon tho watch this space......


https://cimg4.ibsrv.net/gimg/www.sco...990861944c.jpg

https://cimg7.ibsrv.net/gimg/www.sco...9aa1c4370a.jpg

boosted 17 November 2016 02:47 PM

Have I seen this at crail? What time does it run

SmurfyBhoy 17 November 2016 02:51 PM


Originally Posted by boosted (Post 11895641)
Have I seen this at crail? What time does it run

Took it to crail with old launch control which hadnt been changed from vf 35 & did a 13.6

Bogging down terribly,


Can hear in the clip it's over a sec till on boost,

Now running higher launch rpm of 5200 and making 0.9bar off the line lighting up all 4 tyres every time, so well inside the 12's as the launch before was terribly bad.

SmurfyBhoy 17 November 2016 02:55 PM


Better video to show how much it used to bog down.

SmurfyBhoy 17 November 2016 03:07 PM

Clip of it on the dyno,



boosted 17 November 2016 04:09 PM


Originally Posted by SmurfyBhoy (Post 11895644)
Took it to crail with old launch control which hadnt been changed from vf 35 & did a 13.6

Bogging down terribly,

https://www.youtube.com/watch?v=GUpBoTgEhwg

Can hear in the clip it's over a sec till on boost,

Now running higher launch rpm of 5200 and making 0.9bar off the line lighting up all 4 tyres every time, so well inside the 12's as the launch before was terribly bad.

Have you had it back with new launch control strategy?
Be a good race between us!

SmurfyBhoy 17 November 2016 04:17 PM


Originally Posted by boosted (Post 11895678)
Have you had it back with new launch control strategy?
Be a good race between us!

Planned to take it to the last one on sunday there but didn't make it, will have it back up when it opens again,

The launch now is unreal, feels brutal to say the least,

The 13.6 was the early run when still wet it just got slower as it dried and bogged more and more.

Can tell by finish speed it can shift tho :)


https://cimg4.ibsrv.net/gimg/www.sco...f884d43d8c.jpg

boosted 17 November 2016 04:46 PM


Originally Posted by SmurfyBhoy (Post 11895683)
Planned to take it to the last one on sunday there but didn't make it, will have it back up when it opens again,

The launch now is unreal, feels brutal to say the least,

The 13.6 was the early run when still wet it just got slower as it dried and bogged more and more.

Can tell by finish speed it can shift tho :)


https://cimg4.ibsrv.net/gimg/www.sco...f884d43d8c.jpg

Good banter the crail!
You need to get your 60ft down to 1.7 👍 No launch control here!

SmurfyBhoy 17 November 2016 04:50 PM


Originally Posted by boosted (Post 11895697)
Good banter the crail!
You need to get your 60ft down to 1.7 👍 No launch control here!

I would have done better with no launch control lol

Cant wait to try it with this proper launch setup, huge difference

There was stock subarus pulling many car lengths off line and gettin reeled in before the end, dissappointing as it didn't show the cars potential :)

SmurfyBhoy 24 November 2016 04:15 PM

Snip of my "FRSU."


https://cimg4.ibsrv.net/gimg/www.sco...93f9415b58.jpg

LoganS 23 April 2017 03:39 AM

Hi, car looks very nice.

Quick question, where is your windscreen washer bottle relocated?

Thanks,

SmurfyBhoy 23 April 2017 08:39 AM


Originally Posted by LoganS (Post 11935074)
Hi, car looks very nice.

Quick question, where is your windscreen washer bottle relocated?

Thanks,

It uses the bottle that was for the intercooler spray, it's not the most powerful but does what it has to,

LoganS 27 April 2017 01:22 AM

Thanks mate. I want to tidy my bay up a little so looking for ideas. Your looks great, nice and uncluttered.

SmurfyBhoy 27 April 2017 10:29 AM


Originally Posted by LoganS (Post 11935978)
Thanks mate. I want to tidy my bay up a little so looking for ideas. Your looks great, nice and uncluttered.

Thanks man,

:cool:

SmurfyBhoy 30 May 2017 11:55 PM


Originally Posted by boosted (Post 11895697)
Good banter the crail!
You need to get your 60ft down to 1.7 👍 No launch control here!

Well i went back with a carberry map and after tinkering with the launch did a run with a 1.8 60ft and got a 12.7.

I then went an raised my launch that extra bit as its still bogging down even on the run with 1.7 60ft it didnt feel like it got off the line very well.

I got past the 1/8th and seen my eml flashing and backed off. Turned out i had left green test connectors under dash together haha.
Shame as i was on target for a 12.6 easily.

Reckon i could shave a few more tenths pretty easily just by getting the launch setup properly.


https://cimg8.ibsrv.net/gimg/www.sco...94f5697ce9.jpg

SmurfyBhoy 30 May 2017 11:56 PM


Originally Posted by LoganS (Post 11935978)
Thanks mate. I want to tidy my bay up a little so looking for ideas. Your looks great, nice and uncluttered.


My bay as it sits now.

https://cimg5.ibsrv.net/gimg/www.sco...e215160749.jpg

SmurfyBhoy 02 September 2017 08:48 AM

https://cimg2.ibsrv.net/gimg/www.sco...e24b386fc0.jpg


Well I bought that Bugeye Sti I found on here for my mate

SmurfyBhoy 16 November 2017 03:04 PM

https://cimg6.ibsrv.net/gimg/www.sco...30931010d9.jpg

https://cimg7.ibsrv.net/gimg/www.sco...c8bc94e231.jpg

https://cimg8.ibsrv.net/gimg/www.sco...5014a4e626.jpg


Well couple months on and buying this Bugeye Sti is best decision yet,

The little Ibiza Cupra 1.4 Twincharged Dsg 180bhp it has replaced was made of chocolate and felt like it wouldn't last.

The Bug can see over 200 to a tank,

The Ibiza struggled to see 300,

So for the little bit of extra running cost there is a whole lot more fun,

I purchased a set of KYB shocks and plan to refresh the Springs and Topmounts too.

It is good to be able to jump from one into the other just to emphasise the differences between them,

One other mod i did was Kartboy and AS Performance shifter bushes which have made a hell of a change to the shift,

Will be purchasing a set for the weekend toy after seeing first hand the change it makes.

lewis87 16 November 2017 05:20 PM

Nice pair of cars :thumb: Love the look of the blob.

​​​​​I took my blob STI with PPP to Crail, managed a 13.5 and came away wondering what I could do to get into the 12s. Looks like I need a good bit more power.

​​

SmurfyBhoy 16 November 2017 05:25 PM


Originally Posted by lewis87 (Post 11978785)
Nice pair of cars :thumb: Love the look of the blob.

​​​​​I took my blob STI with PPP to Crail, managed a 13.5 and came away wondering what I could do to get into the 12s. Looks like I need a good bit more power.

​​

Thanks man.

It wasnt good when i ran the 13.6 with ecutek map there was stock cars staying ahead of me till 1/8th.

Switched to carberry to allow me to play with launch RPM and took almost 1 sec off.

All down to the launch.

Next target is 11.9 without forging it haha

SmurfyBhoy 25 January 2018 01:59 PM

Couple of recent mods i have had done,
The resonator has been cut out my centre section & my mate fabricated me a backbox delete (Team-Ice Style).

It is exactly as loud as you can imagine :)

SmurfyBhoy 25 January 2018 01:59 PM

Centre Resonator :)

https://cimg5.ibsrv.net/gimg/www.sco...91bbcea8b1.jpg

SmurfyBhoy 25 January 2018 02:00 PM

Backbox Delete :)

https://cimg8.ibsrv.net/gimg/www.sco...be549f6be3.jpg

SmurfyBhoy 25 January 2018 02:04 PM

Next up was a visit to Andy Forrest to get a map with 20% Bio-Ethanol in the tank.


https://cimg6.ibsrv.net/gimg/www.sco...7751dc74d.jpeg

SmurfyBhoy 25 January 2018 02:09 PM

Here is the result from the road dyno using same data as last visit,

https://cimg8.ibsrv.net/gimg/www.sco...3e867c58c7.jpg

As can be seen earlier in thread the 427bhp run came in @ 397bhp on Ecotune dyno

I would be happy if when ran on Ecotune dyno with Ethanol I see close to 430bhp with close to 400Lbs/Ft.

Wont be anytime soon,

I also got the launch rpm set to what i had at crail last visit so hopefully we can drop the best time down a little from the current 12.7.

(12.6 if you count the one i bottled it because EML was flashing haha)

SmurfyBhoy 25 January 2018 02:26 PM

Little launch vid to share the noise :)


RAGGY DOO 25 January 2018 03:17 PM

Some noise off that

SmurfyBhoy 25 January 2018 03:36 PM


Originally Posted by RAGGY DOO (Post 11991360)
Some noise off that

Yep,

Cold Starts have been turned up to 11 hahah



All times are GMT +1. The time now is 09:49 PM.


© 2024 MH Sub I, LLC dba Internet Brands