Headlamps blacked-out & De-tangoed
I've decided to go for a black on grey look for the wagon so the starting point was to get the headlamps blacked-out and de-tangoed.
https://i1270.photobucket.com/albums...ps04cfb84c.jpg Decided to leave the reflector walls for the main beam unpainted so as not to lose any beam on dark nights! https://i1270.photobucket.com/albums...psa8c5a758.jpg Used black window seal to re-assemble the headlight units and chrome bulbs for the indicators https://i1270.photobucket.com/albums...ps7eb0441f.jpg Comparison left to right, glad those indicators have finally gone! https://i1270.photobucket.com/albums...psd9901a29.jpg https://i1270.photobucket.com/albums...ps9387306d.jpg https://i1270.photobucket.com/albums...pse2077634.jpg https://i1270.photobucket.com/albums...ps85750c82.jpg https://i1270.photobucket.com/albums...ps2b17c30a.jpg Finished job really suits the crystal grey paint, love it! https://i1270.photobucket.com/albums...ps005c074b.jpg Also painted the grille surround black and replaced the old badge with a blue version https://i1270.photobucket.com/albums...ps788a5b91.jpg The original headlights that were professionally polished so are as new are now forsale, PM me if interested. https://i1270.photobucket.com/albums...psb42d76bb.jpg |
Rear ARB & side skirts fitted...
20mm rear ARB from a 2003 Sti fitted (same as fitted to GB270) with powerflex bushes.
comparison (17mm top) https://i1270.photobucket.com/albums...psdf38c319.jpg Whiteline rear droplinks fitted as well https://i1270.photobucket.com/albums...psaa6b1f07.jpg GB270 wagon side skirts fitted. I beleive these are unique to the Hawk wagon as the GB270 saloon has normal STi twisties without the extension on the leading edge https://i1270.photobucket.com/albums...psaaa4492e.jpg https://i1270.photobucket.com/albums...psa3ac0a52.jpg https://i1270.photobucket.com/albums...pscef1b603.jpg |
Looks great :) Is it hard to get the headlights apart?
|
Originally Posted by casasteve
(Post 11466391)
Looks great :) Is it hard to get the headlights apart?
|
Originally Posted by modrich
(Post 11466395)
As easy as re-heating your tea! 70-80degC for 7mins in the oven is enough to soften the sealant then prise apart:thumb:
pre heat oven to 75c and leave in for 5-10 mins, best part is that they are heated evenly unlike using a heater or gun :) |
Grilles, brackets & gearbox oil
Zunsport grilles arrived at the weekend thanks to Ved's discount thread:
https://i1270.photobucket.com/albums...ps4c6c6aa7.jpg Finishes off the black-out theme for the front nicely https://i1270.photobucket.com/albums...pscc40d12d.jpg Rad brackets and battery clamp fresh from the powder coaters https://i1270.photobucket.com/albums...psc07ec678.jpg https://i1270.photobucket.com/albums...ps36234ded.jpg https://i1270.photobucket.com/albums...psdb20aa53.jpg Rust is slowly becoming a thing of the past under the bonnet (tatty looking header tank is still to do at some point) https://i1270.photobucket.com/albums...ps7ee3edc6.jpg Also checked the gearbox oil level just to check that the dealer who I bought the car from had done his job, needed a little topping-up :nono: https://i1270.photobucket.com/albums...psf01f338e.jpg easiest gearbox top-up I've ever done! Dipstick tube is where the fresh oil goes... https://i1270.photobucket.com/albums...psd491092b.jpg |
Is that some sort of pump that comes with the triple QX or something else? Looks like a soap pumper!
Really like how this is coming together, and is giving me some inspiration for my own wagon :) My engine bay needs a serious clean up. How does the rear ARB feel? Another upgrade I'm planning :) |
Thanks mate, yeah it's a little hand pump specifically for topping up transmission fluids, used it loads on previous cars as most fill plugs are on the side of the gear box and you can't just pour the fluid in.
The rear ARB hasn't made a massive difference but you can definitely feel the rear gripping a little more and improving turn-in. Worth it for what it cost! |
After reading about, I was thinking 22mm rear ARB. Seems to be the common "best of everything" whereas 24mm is possibly a bit skittish etc. It's all new to me anyway :)
|
Went for 20mm as that's what the GB270 wagon has and didn't want to go too aggressive without uprating the front. I'm happy with how it drives so I think I'll stick with this set-up. Going to replace the front drop links when I do the brakes, probably just use 'heavy duty' items as apposed to 'uprated ones'.
|
This is coming along nicely mate.. I'm currently debating whether to keep hold of my current car or sell it and have something with a wee bit less money tied up in it as a toy.
I loved my Classic Wagons but since they're almost impossible to find in low mileage, rust free condition, I'd been thinking about Newage STi instead and had discounted Newage WRX wagons.. but seeing this thread has possibly thrown a WRX shaped spanner in the works if I decide to return to the fold. :) Cheers, Grant |
Thanks Grant! The Impreza is a tough car to choose as there's so many versions. I decided rather than going for the most powerful/hardcore/expensive (as I normally do) I'd try something that was maybe under powered, softer (and more practical!) and see if it floated by boat, and so far I'm loving the Wagon.
Also, each car I own I learn a new set of skills, this time round being brake calliper rebuilds! More on which later... |
Rebuilt 4 pots
Next job was to get the brakes sorted.
Got hold of some original Subaru 4 pot calipers in good nick, stripped them down and had them powder coated RAL3020 Traffic Red. Ordered stainless pistons/seals/front and rear kevlar pads from Godspeed, and new stainless bleed nipples and pad fitting kit from Brakes International. https://i1270.photobucket.com/albums...ps7d3d8abd.jpg Very impressed with the quality of Pentland Powder Coatings work... https://i1270.photobucket.com/albums...pse36391db.jpg https://i1270.photobucket.com/albums...ps02bd6f8c.jpg They even treated the cast iron casting with corrosion inhibitor before painting so piston bores should be rust free and along with stainless pistons I should never have siezed pistons again! https://i1270.photobucket.com/albums...pse7465140.jpg New seals fitted... https://i1270.photobucket.com/albums...psd9d6280f.jpg Red rubber grease applied to pistons... https://i1270.photobucket.com/albums...ps5c559373.jpg ...and bore and seals... https://i1270.photobucket.com/albums...psd716d417.jpg ...to help the pistons slide home https://i1270.photobucket.com/albums...psd354a566.jpg Completed! I also hand painted the letting as I was advised the stickers don't really work with raised lettering... https://i1270.photobucket.com/albums...pse22b9cb4.jpg https://i1270.photobucket.com/albums...ps5fead08b.jpg Oh and the new stainless bleed nipples fitted. https://i1270.photobucket.com/albums...ps688bb4b1.jpg Getting these fitted over the weekend. BTW one of my future jobs will be fitting Prodrive blue lowering springs, I've been in touch with an ex Prodrive engineer who can get these made up, see my post here for details: https://www.scoobynet.com/suspension...l#post11479810 |
Nice work, mine is on the blue prodrive springs, AFAIK they're made by Eibach?
|
Originally Posted by ScottyPPP
(Post 11480179)
Nice work, mine is on the blue prodrive springs, AFAIK they're made by Eibach?
|
brakes fitted...
So on with fitting the brakes.
Fronts are brembo drilled/grooved/heated treated discs so have a matt grey finish instead of bright metal. I wanted to make sure that I wasn't going to end up with rusty disc bells so de-greased the discs (in the bath!) etch primed and finished with high temp black paint. https://i1270.photobucket.com/albums...ps2d72d4bc.jpg https://i1270.photobucket.com/albums...ps262574a9.jpg Did the fronts first... https://i1270.photobucket.com/albums...ps52be56bb.jpg I used CeraTec anti-squeal lubricant instead of copper slip on the back of the pads. https://i1270.photobucket.com/albums...ps12ce621b.jpg old brakes... https://i1270.photobucket.com/albums...ps0e8da6dc.jpg New discs/pads/calipers fitted... https://i1270.photobucket.com/albums...ps7b80f176.jpg https://i1270.photobucket.com/albums...ps67da41f4.jpg New pad fitting kit... https://i1270.photobucket.com/albums...ps81bb6e7a.jpg Hose Technik braided hoses... https://i1270.photobucket.com/albums...ps9f550fbb.jpg Did the same with the rear discs, etch primed the centres then a few coats of hi-temp black paint https://i1270.photobucket.com/albums...ps800539f6.jpg Old discs pretty ugly but hardly worn... https://i1270.photobucket.com/albums...psdb6a7630.jpg Gave the handbrake mechanism a clean and spray with copper grease... https://i1270.photobucket.com/albums...ps99e8a604.jpg I screwed in the new stainless steel bleed nipple for the caliper and realised that the nut wasn't long enough to give proper access with a spanner https://i1270.photobucket.com/albums...ps86915588.jpg So decided to clean-up and refit original nipples, note the extended nut section to clear the caliper bolts https://i1270.photobucket.com/albums...psbf06d285.jpg Discs fitted and calipers cleaned and painted with matching hi-temp paint to the fronts. Also have fresh caliper stickers ready to fit once the paint is dry. https://i1270.photobucket.com/albums...ps1555b984.jpg https://i1270.photobucket.com/albums...ps85bdf199.jpg At the same time as degreasing and cleaning the rear calipers I took the opportunity to thoroughly jet out the wheel arches and sort-out the flaking underbody sealant which seems a common problem on Imprezas. New Holts underbody sealant sprayed on, looks so much tidier under there now... https://i1270.photobucket.com/albums...psd5626e02.jpg https://i1270.photobucket.com/albums...psf5ef49c1.jpg https://i1270.photobucket.com/albums...ps8204c13c.jpg https://i1270.photobucket.com/albums...ps846c6e73.jpg Then spent the rest of the day bleeding the brake lines with all four wheels off the ground. Took quite a while to get all the air out and I still think they need more bleeding as the pedal still feels a bit too soft for my liking. Pedal feel has improved after bedding in the brakes but still not happy with the pedal feel. Hopefully a few days of driving around will have dislodged any air pockets and make bleeding next time around a bit easier. |
Busy busy!
Was it difficult to refurb the callipers? I'm thinking I should do it at some point, as I have a front that seems to catch a little sometimes. |
I am subscribed to this thread and always enjoy it when a new post pop's up, could well be the best wagon I've seen, looking forward to seeing what you do next.:thumb::thumb::thumb:
|
looking good mate
Have you got any geometry settings lined up ? |
Originally Posted by casasteve
(Post 11490249)
Busy busy!
Was it difficult to refurb the callipers? I'm thinking I should do it at some point, as I have a front that seems to catch a little sometimes.
Originally Posted by chris j t
(Post 11490412)
I am subscribed to this thread and always enjoy it when a new post pop's up, could well be the best wagon I've seen, looking forward to seeing what you do next.:thumb::thumb::thumb:
Originally Posted by SidneySmut
(Post 11490464)
looking good mate
Have you got any geometry settings lined up ? See my group buy thread here on these springs: https://www.scoobynet.com/suspension...l#post11479810 These springs come with specific Prodrive geo settings. |
Whoever moved my other thread to the group by section has locked me out coz I'm not an SN member...thanks for that!
https://www.scoobynet.com/suspension...l#post11479810 Any chance of moving it back:notworthy |
To help get the pistons out, before you disconnect the brake line work the pedal once you have removed pads and caliper.
|
Yeah good advice, if only the person that sold them to me had thought of that! I'm sure Godspeed have some sort of rig set-up with compressed air or something to do the same.
|
This is looking good, I'm currently fixing up a tatty blobeye wagon. I really like the steering wheel, how much did the work set you back, and what have you had done exactly?
|
Nice wagon
|
Originally Posted by MixMan X
(Post 11491776)
This is looking good, I'm currently fixing up a tatty blobeye wagon. I really like the steering wheel, how much did the work set you back, and what have you had done exactly?
My wagon has near perfect paint bar some stone chips. I've just ordered a clay cloth to use before I use a sealer to make sure it stays that way! It's interior, engine bay and mechanicals I'm concentrating on. The steering wheel cost £105+£10 return delivery which is an amazing price considering the skills involved. I asked Jack to thicken the steering wheel up (not sure how he does it because it's not just foam padding) and re-covering with perforated leather to your design. You can choose any colour or combination of up to 3 colours for the stitching (I had a steering wheel done on my old M3 with the 'M' tri-colours, looked amazing). If you're not local to Oxford then I recommend getting a spare steering wheel (I still have mine) if he can't supply one as it takes about 2 weeks to complete.
Originally Posted by taylor85
(Post 11491782)
Nice wagon
|
£105 plus post? That's a bargain. I'll be getting that done I reckon.
Mine needs a lot of work, picked it up cheap, so I'm not too bothered and new what it needed. Bodywork is battered, needs a visit from a dent fix man, as only one mark on hatck has damaged the paint. The back bumper needs painting, it had damaged wheels, bent suspension faded headlights, all sorts. Only the engine is good, only 86k miles with full history. I'm going for saloon STI front wings and bumper so I can fit alloy front wishbones, bigger turbo, decat, FMIC and maybe scoopless bonnet, as I picked one up cheap. |
Sounds like you've got your work cutout mate. STi front wings look cool on a wagon, pity the rears can't be done to match, can wide track extensions be made to fit?
I can highly recommend getting the steering wheel done BTW, probably the best mod you can do for £100! |
really nice mods looks really good
|
Cheers bud!
|
All times are GMT +1. The time now is 03:31 AM. |
© 2024 MH Sub I, LLC dba Internet Brands