Any re-mappers in Warrington?
as title states,
Looking for a decent place to remap my scoob in warrington or nearby wa5 thanks. |
............there are a number of mappers that travel. :D
Shaun |
JGM, Andy Forrest, Andrew Carr, racedynamix to name a few
|
Graham Martin, aka enginemapper is based at Group B Motorsport in Queensferry, just outside Chester. :thumb:
|
Aren't tuning developments up there? Used them lots for my starlet stuff top guys and have a very good reputation!
|
i use andy carr he comes to scoobyspares at fleetwood near blackpool when needed i think hes from preston. not too far from warrington
|
+1 for Andrew Carr send Speedflash a pm on here to book it !
|
Thanks everyone got a good list there haha :)
Originally Posted by JGlanzaV
(Post 11202556)
Aren't tuning developments up there? Used them lots for my starlet stuff top guys and have a very good reputation!
|
There are a few good mappers, just depends how far you want to travel?
Engine mapper is probably your closest and best option, if you want to travel the slightly overlooked but very good Steve Simpson up at TEG motorsport in Lancashire also gets my vote :thumb: |
Graham has left GroupB motorsports.
|
Originally Posted by rallypair
(Post 11203037)
Graham has left GroupB motorsports.
|
Originally Posted by TonyBurns
(Post 11202913)
There are a few good mappers, just depends how far you want to travel?
Engine mapper is probably your closest and best option, if you want to travel the slightly overlooked but very good Steve Simpson up at TEG motorsport in Lancashire also gets my vote :thumb: |
Originally Posted by blackpoolrock
(Post 11204156)
Pretty sure Andrew does there mapping pal !
|
Originally Posted by TonyBurns
(Post 11204176)
No, id pretty much say Steve does their mapping as he owns the place ;)
|
Confirmed Andrew does the mapping , Stuart ownes teg not Steve !
|
Well that's me not going there then, I want a decent mapper doing my work
|
Getting mapped tomorrow at a local place called Power Tuning. hopefully will be all better tomorrow!
|
Originally Posted by TonyBurns
(Post 11204193)
Well that's me not going there then, I want a decent mapper doing my work
tony your throwing a lot of digs about andy carr why ? I have had mine mapped by andy from standard up to 450/400 over the past 4 years with no issues and lots of good advise and workmanship and I know plenty more people that use andy with the same feeling I think if you have something to say about him say it or stop the snide remarks :thumb: |
Originally Posted by Dave-W-
(Post 11205565)
tony your throwing a lot of digs about andy carr why ?
I have had mine mapped by andy from standard up to 450/400 over the past 4 years with no issues and lots of good advise and workmanship and I know plenty more people that use andy with the same feeling I think if you have something to say about him say it or stop the snide remarks :thumb: Andrew took my car from standard to 450/400 give or take a few - and he's just done my new car - always gives advice, always helps, granted he might not always answer the phone but he always gets back to you. Also if you thing The mapper at teg was that good why would teg who have a fantastic name change to Andrew Carr ? Trouble with lots of people is they want a map, they want it now, they want it done in minuets and they want millions of bhp with no supporting mods. Andrew is a great mapper |
Graham (engine mapper ) has left groupb , but they have steve Simpson .. (Mr simtek ) there 1 day a week doing there mapping ..
|
Originally Posted by richgreenscooby1
(Post 11205774)
Graham (engine mapper ) has left groupb , but they have steve Simpson .. (Mr simtek ) there 1 day a week doing there mapping ..
|
Originally Posted by Dave-W-
(Post 11205565)
tony your throwing a lot of digs about andy carr why ?
I have had mine mapped by andy from standard up to 450/400 over the past 4 years with no issues and lots of good advise and workmanship and I know plenty more people that use andy with the same feeling I think if you have something to say about him say it or stop the snide remarks :thumb: |
Who maps at "Power Tuning" then where the OP is going?
Shaun |
Originally Posted by Dave-W-
(Post 11205565)
tony your throwing a lot of digs about andy carr why ?
I have had mine mapped by andy from standard up to 450/400 over the past 4 years with no issues and lots of good advise and workmanship and I know plenty more people that use andy with the same feeling I think if you have something to say about him say it or stop the snide remarks :thumb: Like I said, I want a decent mapper doing my cars. |
Originally Posted by AndyRal
(Post 11204592)
Getting mapped tomorrow at a local place called Power Tuning. hopefully will be all better tomorrow!
|
Originally Posted by TonyBurns
(Post 11206305)
I'm not making snide remarks, I want a decent mapper and I don't count Andy as one of those, especially after the issues with one of the LADS members and the "racerom", plus some of the work isn't the best, its average, the poor guy just who just had his car mapped to "335/335", that's not good for a new age sti with full decat and induction, you should be seeing 15+bhp and torque more than that.
Like I said, I want a decent mapper doing my cars. |
Originally Posted by blackpoolrock
(Post 11206373)
I new you weed on about him , that would be the same person that slagged him for ages then, and I know this to be true, got Andrew to re map it !!!!!
But do a search on here for Racerom and Carberry, the poor guy in the states was having a real good go at AC for stealing his rom and pushing it as his own. |
Originally Posted by TonyBurns
(Post 11206305)
I'm not making snide remarks, I want a decent mapper and I don't count Andy as one of those, especially after the issues with one of the LADS members and the "racerom", plus some of the work isn't the best, its average, the poor guy just who just had his car mapped to "335/335", that's not good for a new age sti with full decat and induction, you should be seeing 15+bhp and torque more than that.
Like I said, I want a decent mapper doing my cars. |
Originally Posted by TonyBurns
(Post 11206374)
And then totally fcuked it up..... then didn't get back, answer texts or calls, yup (not my car btw, Andrew has never mapped one for me and as above, wouldn't want him to either)
But do a search on here for Racerom and Carberry, the poor guy in the states was having a real good go at AC for stealing his rom and pushing it as his own. You need to give your head a wobble tony claiming a guy with a decay and induction should get 350 - know one makes claims like that |
Originally Posted by TonyBurns
(Post 11206374)
And then totally fcuked it up..... then didn't get back, answer texts or calls, yup (not my car btw, Andrew has never mapped one for me and as above, wouldn't want him to either)
But do a search on here for Racerom and Carberry, the poor guy in the states was having a real good go at AC for stealing his rom and pushing it as his own. With regard to the Carberry issue, it wasn't stealing as that program was there for all to use. The original creator of the software just wanted recognition. He and Andrew Carr came to a mutually acceptable agreement. Your allegation of theft is not only untrue it's libellous. |
All times are GMT +1. The time now is 04:52 AM. |
© 2024 MH Sub I, LLC dba Internet Brands