450BHP TURBO ?
hello you lot can you lot recommend a definate 450bhp turbo .
considering a engine build 2.2 forged engine / just curious to what turbo people would go for . considering a MD 321 H but this probly only 400 or just over, im after a bit more running reliable 4**bhp / running on v power and maybe nf booster A forrest map , any suggestions would be good thanks a lot . |
SC50 Turbo this is a 500BHP turbo and will sit at 450 no problem with torque levels to match :thumb:
Or MD321T which is good for 450BHP also Both are about the same price...:wonder: SC50 £1195 MD321t £1295 there might be cheaper out there but i think these are 2 of the best ones if you want reliablity. :thumb: |
Originally Posted by IRC450STI
(Post 7849552)
SC50 Turbo this is a 500BHP turbo and will sit at 450 no problem with torque levels to match :thumb:
Or MD321T which is good for 450BHP also Both are about the same price...:wonder: SC50 £1195 MD321t £1295 there might be cheaper out there but i think these are 2 of the best ones if you want reliablity. :thumb: what do you think to the md 321 h on a 2.2 L engine what would you think this would make in bhp . maybe this is all i need but i definately want 400+ and the engine should be capable of 500bhp .:thumb: |
I used to have the 321h on a 2ltr last year and it was mapped to 383hp 350 torque before i changed to the SC46.
On a 2.2 you should get just over 400 with the 321h Its a very good turbo very quick spool lot of fun But i would recomend the 321T or SC50 if you want 450 with room to spare cos i think the 321H would be at its max at 400+HP SC50 on a 2.2 will be excellent choice imo as you should see more torque than HP depending on mods ie heads etc |
:thumb:
|
When i had SC46 on a 2ltr it made 400HP & 400 Torque only because the heads i had were at there max this turbo should be good for 450+ also on a 2.2ltr with right heads & mods :thumb:
|
321H on a built 2.2 engine cranked up to two bar would make for an astonishingly quick road car with tremendously accessible torque. I'm running around the 420bhp mark at the moment on a 321H/2.0L but that's using V-Power and 10% methanol. I'm planning a built engine myself (probably 2.5) and am tempted to stick with the 321H initally to see how I get on. At 3000-4000rpm and 2bar, I should be gaining an extra 100bhp and 100lb/ft of torque :freak3:
|
Have a chat with Mark @ Lateral !
LOL DunxC P.S. Supposed to be doing mine (321H) now.... ! |
bttt
getting the work done at a s performance .
just getting a few ideas re what turbo to go for , i dont want to build the engine forge etc and only get 400 , im greed like that ha ha .......:thumb: thanks for the info . |
If you can be bothered with messing with methanol, a 2 litre (STI) could make around 450 bhp with an MD321H !
I hope, mines in bits at the moment.... bloody bolts mumble ! Halfords first thing tomorrow LOL DunxC |
Originally Posted by dunx
(Post 7850497)
If you can be bothered with messing with methanol, a 2 litre (STI) could make around 450 bhp with an MD321H !
I hope, mines in bits at the moment.... bloody bolts mumble ! Halfords first thing tomorrow LOL DunxC :p :thumb: |
Originally Posted by GROWLER_GRRRR
(Post 7850502)
naah not bothered about methanol petrol is already a fortune init ,
:p :thumb: V-Power - around 115p per litre Methanol - around 70p per litre :cool: |
Originally Posted by lunar tick
(Post 7850520)
:nono:
V-Power - around 115p per litre Methanol - around 70p per litre :cool: might be summit to consider cheers for the info .:luxhello: |
Originally Posted by GROWLER_GRRRR
(Post 7850523)
you must be one of the methanol boys from alston aka the splinter group !
might be summit to consider cheers for the info .:luxhello: |
is the 2.2 open deck or closed mate????:)
|
I'm using the MD321S on a 2.35
Running 496hp 480 ftlb @ 1.7 Bar :) |
Have a chat with AET Turbos.
I tested a few standard position turbo's on my 2.5L Cosworth engine. One of them achieved 480bhp @1.4bar and the current one achieves 530bhp @ 1.7bar. All done on VPower. ;) |
Originally Posted by BadJK
(Post 7850668)
is the 2.2 open deck or closed mate????:)
|
I have a md321T on my forge 2.5 .....great combo :thumb:
|
I have not seen anyone say anything about the FP Green Turbo.
You can import one from the states for about £900 and that is with delivery. Will all so do the 450bhp your looking for. |
TD06-20g 8cm^ or TD05-20g 8cm^ will get u 450bph on a 2.2L .
|
bttt
:thumb: thanks for all the info :idea:
|
Have a chat to Mark at Lateral Performance 020 8420 5444 if you are planning a 2.2 build (good advice and prices).
Although the MD321T will do over 450bhp on a 2.2 he also has an MD321T+ turbo now, which should do over 500bhp on a 2.2 build all still in the standard mount position. |
another vote for the MD321T here :)
mine's making 464/505 on a built 2500cc no meths (yet ;) ) |
What's the difference in 321T and 321T+?Comp wheel?
|
I hate these bloody threads!!
Always giving me ideas I can't afford!!!! :) |
enjoy it
Originally Posted by STiFreak
(Post 7851313)
Have a chat to Mark at Lateral Performance 020 8420 5444 if you are planning a 2.2 build (good advice and prices).
Although the MD321T will do over 450bhp on a 2.2 he also has an MD321T+ turbo now, which should do over 500bhp on a 2.2 build all still in the standard mount position. loving the info keep it coming dudes ..... its all money but your not here long so ENJOY IT .:thumb: |
nice and interesting thread..
I'd also like to know what else should be done for 450 bhp.. pistons, conrods? gearbox? 720cc injectors? anything else :D ? |
Originally Posted by austrianscooby
(Post 7857008)
nice and interesting thread..
I'd also like to know what else should be done for 450 bhp.. pistons, conrods? gearbox? 720cc injectors? anything else :D ? |
Originally Posted by IRC450STI
(Post 7857399)
when you put your foot down :lol1: WOOOOOOOOOOOOOOOOOSH !!!!!!!!!!!! POP POP BANG !
I hate you for that :cry: :luxhello: just kidding mate ;) I've got STi V4.. looking for that 450 :Whatever_ But atm can't afford it :cry: pink stuff €€€ are lost atm :D That's fitted atm: SARD Fuel reg XS-Power FMIC Apexi Power FC Brembo 4-pots Front - Rear still to come :( Next plan is an uprated gearbox.. looking for a 6-Speed or PPG bargain.. and maybe I find a cash cow next time :D |
All times are GMT +1. The time now is 04:43 PM. |
© 2024 MH Sub I, LLC dba Internet Brands