Average Power
Over the past few years the tuning scene has really taken a step forward. A few years back getting to 500 bhp was a huge landmark, wheras now its almost a common occurence. So let's have a poll and see how powerful the "average" Subaru is.
Let's just have genuine power figures and no trolls please..:thumb: |
It may be an idea to list the year of car (i.e classic/newage) and mods, just to let other members have an idea of what they may need if they want more power...
Looking good so far though:thumb: |
Ok, I'll go first and although I am sure this has been done before but should make an interesting read:
Classic MY00 UK Turbo Ninja Sports Cat Magnex centre & backbox JR Panel Filter Ecutek Tek3 remap @ Powerstation 273bhp/273lbft :thumb: |
i currently have zero bhp in my sub's because of my immobiliser prob :(
|
Have a look here for mods etc
<<<<<< |
Here is mine.
Classic STI Version. III Full Haywood & Scott Turbo Back System Apexi Power Intake Induction Kit Forge Dump Valve 321 BHP/ 285 LB/FT! (Rolling Road Power Engineering) |
dont know so i am going for 200to300bhp.... .
|
Standard MY05 Type25 with 350BHP, but more importantly 390lbs/ft:)
|
300bhp classic uk 2000.
view my scooby for mods etc |
classic 1998 terzo
288bhp 293lb/ft |
RCM prepared P1
550BHP |
All being well, picking it up soon
2002 Bugeye WRX 430/430 :) |
2003 WRX 550bhp/520lbft when i get it right ;)
|
God dammit, I havent even picked it up yet and im planning the next build to keep up :D
|
Originally Posted by cookstar
(Post 6913497)
God dammit, I havent even picked it up yet and im planning the next build to keep up :D
|
I'll tell you tomorrow after Andy Fs done his stuff !
|
Originally Posted by Neilo
(Post 6913494)
2003 WRX 550bhp/520lbft when i get it right ;)
I saw your car before the TA, and if you achieve that spec, that's a very big wolf in sheep's clothing....:norty: :thumb: |
well it IS 501/480lbft as it stands....but that was a 25 minute map ;)
|
2004 sti.
de cat down pipe, ninja cat back, prodrive cold air intake, ecu tec remap, 338 bhp/305 lbft :thumb: |
04 STI - 370/370.
Mods in view my scooby |
327bhp 287lb/ft at 1 bar
Short block built by Autosportif including STI 8 crank Steel rods Competition big end bearings Omega forged pistons GP N baffled sump Silkolene Pro S 10w/50 Oil Ecutek Walbro 255 fuel Pump FSE FPR FM oil Cooler HKS FMIC with semi-lagged pipework Pipercross Viper Blitz DV "Harvey's Special" Ported OE headers - wrapped Harvey's own up-pipe - wrapped Standard VF29 Turbo 3 inch open neck HKS dowpipe - wrapped Blitz Nur Spec http://www.surreyscoobies.co.uk/foru...on_biggrin.gif VF34 to go on and another remap, so hoping for 350bhp after that |
how much bhp/lbft would a FMIC add to my car.
|
2002 JDM Blobeye wagon
Full 2.75" milltek decatted exhaust K&N panel filter VF34 Turbo ecutek reflash map- tegsport 312.9 bhp and 303 lb torque @ 3500 rpm. |
99 classic ra lots of mods 420bhp
|
jdm 2003 sti 500bhp and rising :D
|
i thoguht it was 436 steve ;)
|
dont know power
td05 (20g)
ecutek full decat (2.5 inch)(turbo back) uppipe kn panel filter uprated fuel pump hks viarable boast controler (runs 1.2 and 1.5) was 265 before uppipe and middle sections was added and that was at 0.9 so dont know now (any ideas ??) |
Standard Type 20 351bhp 350lbs
seems to have gained 1 bhp to take me in the next bracket :D Tony |
once i get the zorst on i should crack the 200bhp barrier LOL
|
I would've split the first option into:
200-250 250-275 275-300 That would cater for standards and mildly modded differently. * crap, i thought it was, what you think is average, not what you actually have. :iamwithst |
All times are GMT +1. The time now is 12:21 AM. |
© 2024 MH Sub I, LLC dba Internet Brands