ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Subaru Parts (https://www.scoobynet.com/subaru-parts-451/)
-   -   Alkatek/simtec 3 plug ecu for v3/4 (https://www.scoobynet.com/subaru-parts-451/1010669-alkatek-simtec-3-plug-ecu-for-v3-4-a.html)

Shmerman 27 August 2014 09:40 PM

Alkatek/simtec 3 plug ecu for v3/4
 
Alkatek ECU (new update) with AL and LC activated. Reduced to £450 delivered

https://i42.photobucket.com/albums/e...20500/6382.jpg

Shmerman 04 September 2014 11:33 PM

Up

Shmerman 08 September 2014 03:05 PM

Will take £600

Shmerman 11 September 2014 09:32 PM

Now £550

Shmerman 17 September 2014 01:20 PM

Up

scotty75 17 September 2014 01:32 PM

Now I wish I had the money for that but I will just have to stick with my ESL for the time being GLWTS .

Shmerman 04 October 2014 03:07 PM

up

Shmerman 25 November 2014 09:41 PM

Up

Shmerman 29 November 2014 09:19 PM

Up

Shmerman 06 December 2014 02:48 PM

Up

ossett2k2 06 December 2014 04:09 PM

Does this have any advantages over the ESL? And can this can this be self mapped or does it have a license and have to be mapped by a pro?

Shmerman 06 December 2014 04:56 PM

It has the following

MAF Less System
Real Time Live Mapping
Fully Plug ‘n’ Play
Inbuilt Advanced Turbo Control
Multiple Maps
Knock Detection & Warning
Active Knock Correction
Closed Loop Fuel Control
Closed Loop Idle Speed Contol
OEM Driveability
Anti Lag System
Launch Control
Gear Change Output (Shift Light)
Multi Stage Engine Speed Limiter
Individual Cylinder Fuel & Ignition Trims
Automatic Water Spray / Injection Control

So it has a few things in there over and above the esl.

As far as I know you can map one yourself.

ossett2k2 06 December 2014 06:52 PM

My ecu is also a 6s. iirc you were running this ecu on a 500bhp car so will be mapped for your mods,with it being multi maps would one of the maps still be set as standard 280bhp?
Do you know what software and lead I required to remap?

Shmerman 06 December 2014 11:31 PM

The ECU was never mapped for a standard car. The base map on there was put on by my mapper from another car of similar specification to mine.

I believe you need the simtec/alkatek dongle or lead - software wise I an not sure what is compatible.

Andrew Carr mapped my car and has done for the last 10 years so he knows the car well. He isn't a million miles away from Leeds either.

piehole1983 07 December 2014 10:26 AM

The only things I can see that ESL doesn't have (I have ESL) is the shift light, individual cylinder injection control and auto water spray.

Shmerman 07 December 2014 07:34 PM

Im not sure how sophisticated the knock control is on the ESL but I know the Alkatek pulls timing when it detects knock.

You can also connect a Toucan to the Alkatek.

piehole1983 08 December 2014 11:20 AM


Originally Posted by Shmerman (Post 11576771)
Im not sure how sophisticated the knock control is on the ESL but I know the Alkatek pulls timing when it detects knock. You can also connect a Toucan to the Alkatek.

ESL uses the factory Subaru knock control, just the same by the sound of it.

Shmerman 08 December 2014 08:50 PM

Now £450 delivered.

ep2007 08 December 2014 10:55 PM

Bargain!

jaygsi 09 December 2014 04:24 PM

Is this for the uk 2000 turbo Impreza?

scotty75 09 December 2014 04:52 PM


Originally Posted by jaygsi (Post 11578126)
Is this for the uk 2000 turbo Impreza?

Yes for a my97/98 bud .

Shmerman 17 December 2014 01:57 PM

Yeah for 97/98 cars

scotty75 17 December 2014 05:50 PM

Any other pictures of the ECU to show that it is Alkatec/Simtec ECU instead of the outer casing .

Shmerman 17 December 2014 11:05 PM

If you are genuinely interested in buying it I will open the case and take a picture of the circuit board for you.

zakscooby1 18 December 2014 03:54 PM

I spoke to Andrew leech last month as I also have the simtek/Alcatek and these can't be self mapped unfortunately according to him

Andyrad 28 December 2014 03:29 PM

Still got it?

Shmerman 28 December 2014 08:53 PM


Originally Posted by Andyrad (Post 11591182)
Still got it?

yeah, still here.

Scooby Stevo 30 December 2014 09:25 PM

Cheeky £350 offer, can collect ?

Shmerman 15 January 2015 09:37 PM

up

Scooby Stevo 17 January 2015 03:44 PM

offer still there, can collect tomorrow :thumb:


All times are GMT +1. The time now is 12:40 AM.


© 2024 MH Sub I, LLC dba Internet Brands