Hi Squizz,

yeah, that's the list(supportedmodels.pdf ) I checked . But a PPPed My00 is not special mentioned there. I think there should not be a problem, because the OBD- protocol should be the same in all cars with the same MY. BUT I'am NO sepcialist!!
So pherhaps someone can tell me directly if the SECS 1003 device is compatible to a PPPed MY00.

cheers,

Joachim

Is there any chance of a photo of the connection for the MY01 model

I am really ham fisted re any thing electrical and would just like to see how this wonderful unit connects

Phil

Hey Simon,

nice to hear from You!!!! I' am at work now, so I will check my mailbox when I' am at home again.
I hope You recived my mail with my request yesterday!!

take care,

Joachim

Phil - The Connector and position of the ECU plug in the car is the same on the MY01 as on the MY99/00. So have a look at the SECS1003 Fitment guide download on the www.psi3.co.uk website, and on one of the later pages there's a picture of connecting the unit to the car.

The ECU plug is in a recess at the bottom of the dashboard steering column, and slightly to the right... :)

Squizz.

Thanks Squizz

;)


Phil

I have my engine management light on today.
Would this device tell me what the problem is and allow me to just Reset that problem, Not reset the whole ECU??
I dont want the ECU having to learn again sa it's been ECUTEKED.

Dave.

(Any Group Buys going to be happening)

AFAIK an ECU reset will not delete the ECUTEK mapping.

-Torstein

I know it wont delete the Remap , just dont really wont it going back through the learning process.

Sorry to hear that mccltd. :(

As far as I'm aware (and I cannot speak directly for Psi3), if the CEL is due to sensor failures or something of that ilk, then the SECS unit will indicate the problem (or line of enquiry). :)

As far as the ECU reset facility is concerned, I don't know how that applies with an ECUTEK... :rolleyes:

Is the unit ok to run with a PPP'ed UK STi7 (MY02)
Also, is there a pod mount available for this car as I already
have a 2DIN CD Player taking up the slots where I guess you would normally place the unit.

Cheers,
Chris

My mate Fizz is running a PPP'd WRX MY01. It works fine, with the only problem being that the Boost reported is that which the ECU is fooled into thinking by the PPP piggy-back chip.

Thus it only shows up to 0.8 Bar but the real figure is actually higher.

I'm sure this is the same with STi7 PPP - Simon/PCB? ;)

Hi,
Whats the turn around like on it and the latest time for next day delivery?

Hi Simon,

You have mail and an order confirmation for an SECS1003 device with a top-pod-mount to fit a PPPed MY00. !!!!!!!!!!

I hope the device is soon able to work with an external oil-preasure and oil-temperature sensor!! Have You any idea when that will be??? I think these features are really very interesting!!! Not only for me, how I belive.

Take care,

Joachim

if you have a check light then if a component is replaced the ECU will be reset to clear the error to ensure the car works again.. so which ever way you do it it will need an ecu reset... I shouldn't affect the mapping but as you say regardless of the error it'll have to learn again anyhow..

mccltd, best to call me again. 07796 992992

Fitz, works fine with STi7 PPP ( i know because thats what i've got :D )


Simon





[Edited by PCB - 1/22/2003 6:34:54 PM]

Thanks Simon i have ure mail, cheque in the post tomorrow morning.
Whats the delivery time like at the mo?

Danny Boy

Danny, we have stock, units normaly arrive next day :D

simon

Do tou know anyone who has a replacement tray section (to refit to standard for servicing after i have cut mine in half!), I ask because i still have warranty left on the car and was thinking they probably would not like the addition of the SECS. Saying that there is no real mod to the vehicle other than the plastic butchery that would affect the warrenty. Has anyone had a warrenty problem regarding the SECS unit yet?

Dan

Any more news on the pre97 model?

Tony.

PCB - Thanks.

But in answer to the second part of the question, is there an alternative mounting to that shown. Eg. can it be mounted similar to the defi's in place of the clock ?

Cheers,
Chris

Fitz, our website will soon include a S1004 which is a pod mount version for MY01+ cars. Again these will be genuine subaru pods, and will be available towards the end of next week.
If you want to know more give me a call 07796 992 992 or 01453 793011.

simon

That's good news. I guess you'll put some piccies up on the web site, so will wait to see those.
Thanks....

So that's a no news on the pre97s then? :(

Tony.

Sorry Tone, we are still working on the pre '98 software, we are aiming to have units for sale some time in February.

simon

Looking forward to an "early model" unit :) Do we get it cheaper coz ours will only show one reading at a time ;)

Simon,

Can you have a quick look at the mail I have sent you Re. Unit I got on Saturday when we came to to photo's?

Darren

Simon,

I have sent a couple of e-mails via the psi3.co.uk site, but no replies yet.

I have money burning in my pocket, just need a few answers :)

Regards,
Torstein

Not too long away then :D .

Cheers,

Tony.

Sorry to be an annoying t#@t..... any news on the pre97 versions?

Tony.

Err, Simon, guess what I forgot to pick up from you while I was down at yours.... yeah, those damn connectors ! DOH!

I'll figure out what I owe you, and send a check.

Paul Houbart
Gecko Motorsport