I'm not sure to be honest. Had a fair bit going on and a lot of parcels going out the moment.
All I know is that my wife sent it along with some other parts. Shes not here right now so I cant ask her...

All I know is what she told me, its sent via the postoffice.
I will cover the extra £2 - £4 of the shipping costs.

If your not happy all I can do is offer you a full refund including original shipping costs once you once you return it if it arrives too late for your needs.

Sorry

Pics added of the clutch as requested. Plates are like new. I measured them at 3.937mm and believe they are 4mm from new!

Nono.. Really no problem. But i was going to look how long sending would take to get here iff I knew when you've sended it.

Thx for everything, will let you know when its here

Sam

Is the long engine still for sale?

No problem mate. Normally everything is sent recorded so I'll try and get you the tracking number when she gets home :)

Still available at the moment. I'm going to give it another week and then it will be split as I have buyers for almost everything bar the 2.1 short block which I'm happy to keep for a while or I might even use it at some point (dont have a subaru at the moment but you never know) :)

thx mate :) not all the parts were in for fixing my car so lining will be for next weak orso. hope to get them untill then

All updated.

6-speed set-up available again due to change of plans from the purchaser. £1500.

Recieved ALK 👍 thx m8 :)

No problem Sir. Glad it arrived safely :)

Engine, 6-speed set-up, clutch, 2 bumpers (p1 white and rougher black one) and flat bootfloor left.

Most parts now gone, here is whats left....

OS Giken twin plate - £400 (needs push pull convertor) but plates are like new!! If I find the push pull converter it will be £450 including this.

6-speed full kit with new front seals and wheel bearings £1500

white bumper off track car, cut for FMIC with P1 splitter and air intake at drivers fog light £75

Black facelift bumper cut for FMIC £40

Flat boot floor from Arch £50

Engine options (Full spec on page 1)
Complete engine £4,600
2.1 block with all pumps, modine, pulleys and belt etc £3,100
2.1 block with no pumps, modine, pulleys and belt etc £2,700

The engine will remain complete for another week and then as soon as I have time it will be split as I have buyers for the heads, sump, studs, timing belt kit.
The 2.1 short block will then be available for £2,700 bare or £2,950 with the new modine, RCM water pump and RCM oil pump.

All PM's replied to again

Any chance you have an air filter knocking about bud?

I have one for a V3/4 STI. (Orangle label MAF)
Its not really universal though. The cone is flanged to a 4 bolt set-up so it mounts directly to the orange MAF.

Have a pic somewhere if it would help

PM's replied to again.

Engine will be split when I get time next week unless I get a buyer for it complete before then.

Bunch of boxes in the car to take to postoffice at lunch time today.
Then 3 to sort out tonight for Saturday post, that should see everything up to date.

Main engine parts now sold. Will be split next week when I get a chance.
I'll be in touch with people once its done.

2.1 block with new pumps and modine - £2900 OR £2700 without pumps and modine

Heads - £1,200 (Owes me £1500+) Prov sold to Wuz
Sump - £300 (owes me £400, they are £600 new) Prov sold to Jamesmac
Timing belt kit £150 Prov sold to Chris Allsop
Studs - £200 (owes me £290 but cost £320 new) Prov sold to Marc.

Duncan - fire a PM or a text to Marc as I would like to use those studs on his CDB 2.5 build, no point in me buying them for him to buy them off me.........

He'll take them, tell him I said he needs them.......... JOB DONE!

Wuz - no problem. Got your PM earlier about them too.
Cosworth studs prov sold to Marc.

2.1 block back up for sale.....
Still splitting as I have buyers for all the parts and dont want to let them down.

PM's replied to again.

Last few parts.... May take sensible offers on these.

OS Giken twin plate - £400 (needs push pull convertor) but plates are like new!! If I find the push pull converter it will be £450 including this.

6-speed full kit with new front seals and wheel bearings £1500

white bumper off track car, cut for FMIC with P1 splitter and air intake at drivers fog light £75

Black facelift bumper cut for FMIC £40

Flat boot floor from Arch £50

Engine options (Full spec on page 1)
2.1 block with new pumps and new modine £2,900
2.1 block with no pumps or modine £2,700

i-trader feedback left for everyone now I think.
If I missed anyone let me know

PM's replied to again :)

Engine list revised. I'm going to strip it tonight. :(

What no one want to buy it at that price are people mental and want to pay more money to get a 2.1 stroker built for them .

Not sure mate. I think £2,600 is pretty good for an unused 2.1
I know I paid a lot more than that for it. :(
I'm always open to offers but would need to be pretty close to that price.

Even if you do all the running around sourcing parts and organising the build its over £3k minimum!
(Probably not much change from £4k if you bought it all built "of the shelf")

List updated

Cheap 2.1 CDB for someone ;)

Do you sell the shell too? How much does it cost?

Sorry the shell was scrapped.

All PM's replied to. Cheers

List updated. Few bit gone. 6-speed linkage bush kit available again.
Here is whats left:-

Twin Plate OS Giken £400

AS Performance 6-speed linkage bush kit, new and unused £60

Flat bootfloor £40

Black Facelift bumper £40

Full AVCS timing belt covers £30

AVCS crank / trigger wheel £10

Orange MAF £50

Team Dynamic Pro race 1.2 in white. £325
17" x 8" ET50 5x114 so MY05 onwards STI
As new (tyres fitted and removed)

List updated. Couple bits back up for grabs and a couple reduced in price....

Bare CDB £260

Twin Plate OS Giken £400

AS Performance 6-speed linkage bush kit, new and unused £55

Flat bootfloor £40

Black Facelift bumper £35

Full AVCS timing belt covers £30

AVCS crank / trigger wheel £10

Orange MAF £50

Team Dynamic Pro race 1.2 in white. £300
17" x 8" ET50 5x114 so MY05 onwards STI
As new (tyres fitted and removed)
These would cost between £600 and £700 new!