ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   ScoobyNet General (https://www.scoobynet.com/scoobynet-general-1/)
-   -   API Engines (https://www.scoobynet.com/scoobynet-general-1/1032544-api-engines.html)

alfie1942 04 February 2016 09:37 AM

Excellent to see some good news. Simon has always been well regarded and the move seems to have been a bit of a shambles but if the work is still good I will wait - albeit very impatiently!

rob ellard 04 February 2016 11:52 PM


Originally Posted by Griblands (Post 11792047)
I cannot praise API enough.

They have had problems with BT (as have everyone else in Britain!!) with their internet and landline and have had to revert back to an old phone number.

Ask for Si Bryant on 01926 614333.

I spoke to him today. He builds my engines & gearboxes. If I can't break them, API must be good!!!

https://cimg6.ibsrv.net/gimg/www.sco...eb6b233c78.jpg

API are good !... Especially considering that its Mick and Rob that build the engines and gearboxes !

Munk 05 February 2016 08:15 AM

i rang them the otherday and also got straight through simon was the fella i spoke with and was more than happy to sit on the phone giving me advice on engine work i could undertake! also offerd to send emails with some info! seemed like a top bloke to me:thumb:

Howoodie 08 February 2016 09:24 PM

I've just had to take back my Hawkeye after nearly 3 months of misery always chasing them, hardly a call back, broken promises and now I've had the engine investigated it's worse than when it went in. Compression problems were supposed to be sorted by new rings unfortunately it hasn't and I have to start again.

jayallen 08 February 2016 09:30 PM


Originally Posted by Howoodie (Post 11794189)
I've just had to take back my Hawkeye after nearly 3 months of misery always chasing them, hardly a call back, broken promises and now I've had the engine investigated it's worse than when it went in. Compression problems were supposed to be sorted by new rings unfortunately it hasn't and I have to start again.

Care to elaborate?

Howoodie 08 February 2016 09:43 PM

Took car to API as they were the company that rebuilt the engine 4 years ago according to the history file. The engine was running rough and I felt it needed check over and remap. API said the compression was well down 90 on one cylinder and needed to investigate by removing engine. Seemed fair enough but the job took weeks eventually we were told its wasn't too bad just piston rings and recommended A new ecu with 7 maps however the job drifted on for weeks even took days off to go there the promises were never kept and in the end the car was left with the mapper TDR ? But they never received the correct ecu. 3 times the wrong parts were sent so in the end I took my car back however after new investigations the compression is the same if not worse and there seems to be several oil leaks and missing parts. Nightmare

jjones 09 February 2016 10:13 PM

Is Nathan still there? Top bloke.

joz8968 09 February 2016 10:30 PM


Originally Posted by jjones
Is Nathan still there? Top bloke.

I was gonna ask that. Always enjoyed the conversations with him. A real character.

John Mathewson 10 February 2016 06:03 AM

Only problem I have is getting sorted and a bit more. Very happy with Simon at API

alfie1942 24 March 2016 12:41 PM

Hi Guys,
Finally I have my car back and it is great. As they say "for legal reasons" I can't put the whole saga here but if you need Engine or gearbox work I strongly suggest you go direct to RM Performance Ltd Unit 5 Riverside Business Park Banbury OX16 5TU 01295 277 556. They not only do great work but they even answer the phone!

merlin24 25 March 2016 10:19 AM


Originally Posted by alfie1942 (Post 11812803)
Hi Guys,
Finally I have my car back and it is great. As they say "for legal reasons" I can't put the whole saga here but if you need Engine or gearbox work I strongly suggest you go direct to RM Performance Ltd Unit 5 Riverside Business Park Banbury OX16 5TU 01295 277 556. They not only do great work but they even answer the phone!

Glad to have helped you out of your 'situation' and get your very nice Spec D back on the road Richard.

See you next month for your final map :thumb:


Mick

joz8968 22 July 2016 11:42 AM


Originally Posted by merlin24 (Post 11813135)
Glad to have helped you out of your 'situation' and get your very nice Spec D back on the road Richard.

See you next month for your final map :thumb:


Mick

Mick, out of interest, who does RMP use for mapping?

merlin24 22 July 2016 09:27 PM


Originally Posted by joz8968 (Post 11860846)
Mick, out of interest, who does RMP use for mapping?


We use and recommend Mark@TDR Warwick
http://tdracing.co.uk/


Mick

harry007 22 July 2016 09:57 PM

Mark @ TDR is the man. He did all of the work on my spec c and its going in for more soon.

Dubzy 22 July 2016 11:32 PM

Mark has done all my mapping too and has always achieved great results. He has also built my latest 2.35 stroker engine so hes not just a laptop wizard like some so called mappers but has a full understanding of the mechanics too. He is also a very friendly and honest chap to boot so i have no problem recommending him to anybody :thumb:

alfie1942 24 July 2016 10:51 PM

I agree with all of that. TDR did a great job on my (finally) rebuilt engine. A very impressive setup.

alfie1942 01 December 2016 05:01 PM

Hi
Has anyone passed by Long Itichington recently (does anyone ever?) to see if API are still trading?
Richard

MightyArsenal 01 December 2016 07:44 PM

i wondered that aswel, haven't heard anything good or bad from API for a while now.

JGlanzaV 01 December 2016 08:22 PM


Originally Posted by MightyArsenal (Post 11899879)
i wondered that aswel, haven't heard anything good from API for a while now.

Efa

merlin24 04 December 2016 06:44 PM


Originally Posted by JGlanzaV (Post 11899888)
Efa

:lol::lol:

joz8968 04 December 2016 07:39 PM

Mick, you 'mercenary', you. ;)

StueyBII 06 December 2016 06:53 PM

I notice they have no landline now and the website is totally half done, literally.

merlin24 06 December 2016 09:00 PM


Originally Posted by joz8968 (Post 11900580)
Mick, you 'mercenary', you. ;)

:king:

joz8968 07 December 2016 11:42 AM

lol

averyp2 07 December 2016 01:01 PM

There are cars outside but not sure if anyone is home!

rallygc8 24 January 2017 08:26 PM

API are open. Very small operation thus why phone not always answered. If building engine nothing worse ghan breaking off and thus phone delays. Simon very knowledgeable, not too expensive but often tries to please too many people at the same time. Builds good engines but tries to avoid full g/box strips. Lead times can be long as he is very busy so try and be patient. He is not perfect and is trying hard to regain the API reputation after being dropped in the 's. ..t by ex directors. PS. PHONE IS 01926 614333.

merlin24 24 January 2017 10:02 PM


Originally Posted by rallygc8 (Post 11913511)
API are open. Very small operation thus why phone not always answered. If building engine nothing worse ghan breaking off and thus phone delays. Simon very knowledgeable, not too expensive but often tries to please too many people at the same time. Builds good engines but tries to avoid full g/box strips. Lead times can be long as he is very busy so try and be patient. He is not perfect and is trying hard to regain the API reputation after being dropped in the 's. ..t by ex directors. PS. PHONE IS 01926 614333.

Think you need to get your fact's right before posting drivel up chap

rallygc8 24 January 2017 10:45 PM

Api
 

Originally Posted by merlin24 (Post 11913545)
Think you need to get your fact's right before posting drivel up chap


Hah hah. I seem to have woken up a sleeping bear!!!!! CHAP

alfie1942 25 January 2017 09:29 AM

From my own painful and expensive experience any s**t Simon may be in is entirely of his own making!

banny sti 25 January 2017 12:37 PM


Originally Posted by rallygc8 (Post 11913559)
Hah hah. I seem to have woken up a sleeping bear!!!!! CHAP

Hi Simon :thumb:


All times are GMT +1. The time now is 08:46 AM.


© 2024 MH Sub I, LLC dba Internet Brands