Feel free to pop round tomorow ;)
|
Originally Posted by JamieJerkovic
(Post 11362240)
Feel free to pop round tomorow ;)
|
Got the car back yesterday and firstly if like to thank Paul of pr developments and Duncan I'd recommend these 2 to anyone both top blokes and extremely helpful
So to the good stuff after the car had a complete service including oil pump, water pump, cambelt, oil filter, spark plugs the car pulled a impressive 333bhp and 340ft lbs http://i1244.photobucket.com/albums/...psm51vtwng.jpg Changed my spec slightly Sti tmic Sti manifold VF35 650cc injectors Sti decat up pipe Induction kit Hrc 255 fuel pump Japspeed sports cat Japspeed exhaust system Eibach springs (30mm drop) http://i1244.photobucket.com/albums/...psige2beb3.jpg Still a few things to do hopefully will have a set of black mud flaps by end of the month then it will be front splitter, Sti scoop, Sti spoiler Still running standard brakes atm so more than likely will upgrade to brembos within next few months and just to be safe a new clutch, also may go for a 3" decat system after my mot Sam |
cough cough thanks to me for putting you in touch with paul......cough cough :)
just dropped my car off at pauls for a mock-fitting of the fmic before it goes off for paintwork next week,paul asked if you were happy with it |
I haven't had change to give it a good drive yet irl do that at the weekend, but so far I love it mate couldn't be happier with it just gutted I forgot to ask for pops and bangs lol
|
Well done fella, great result you have there. It must pull like a absolute demon now.
Phil |
They are some cracking results there fella :thumb:
|
Originally Posted by PhilWrx100
(Post 11363837)
Well done fella, great result you have there. It must pull like a absolute demon now.
Phil I was well happy 330 is what I was hoping for before it went in and got a shock when it pulled that much torque wasn't expecting that much :D |
Originally Posted by Mustoe91
(Post 11363850)
Pulls like a train phil :thumb:
I was well happy 330 is what I was hoping for before it went in and got a shock when it pulled that much torque wasn't expecting that much :D |
Duncan said engine was in great condition good to know when I get bored :D
|
Not much has happened since it's been mapped just been enjoying it but to complete the car still needs a decent brake set up but only drive it at weekends and occasionally some nights so that will be done soon but not in a big rush
Decided to start styling it now got a set of black mudflaps on there way then I've decided it needs a Sti spoiler Sti scoop and a front splitter to complete the look Then after my mot I may go full decat haven't decided yet Sam |
So after 7 years I thought I’d revive this thread as a lot has changed lol
In them 7 years my original engine decided to let go so it was decided to go with a semi closed sti engine and fully forge it matched with some Jdm Avcs heads, 1000c injectors with a set of Fuji racing fuel rails, rcm headers and a trick up pipe then came the decision with the turbo cut a long story short of running a laggy turbo for about 4 years I’ll get you to where I am currently today In the last few days I’ve recently picked up my car this is currently how it is today Ive had a 6 speed fitted Had the manifold reversed New RCMPT07 turbo fitted Tein coilovers fitted Had Bob Rawle map it on Friday and I was shocked at the results I’m not one for chasing figures now a days but I was expecting around 450bhp It made a strong 485 bhp with 432 lbft at 1.5 bar thing is a animal Have a few plans for her just to tidy her up abit she needs a new carpet and a new steering wheel and a few other little bits and bobs doing and after 9 years of ownership I might finally be happy with her haha Not bad for a 16 year old WRX https://cimg3.ibsrv.net/gimg/www.sco...d14d3d520.jpeg https://cimg2.ibsrv.net/gimg/www.sco...f5aaa3f76.jpeg https://cimg0.ibsrv.net/gimg/www.sco...61a6a631c.jpeg https://cimg7.ibsrv.net/gimg/www.sco...c4f9a87e2.jpeg |
Originally Posted by Mustoe91
(Post 12110769)
So after 7 years I thought I’d revive this thread as a lot has changed lol
In them 7 years my original engine decided to let go so it was decided to go with a semi closed sti engine and fully forge it matched with some Jdm Avcs heads, 1000c injectors with a set of Fuji racing fuel rails, rcm headers and a trick up pipe then came the decision with the turbo cut a long story short of running a laggy turbo for about 4 years I’ll get you to where I am currently today In the last few days I’ve recently picked up my car this is currently how it is today Ive had a 6 speed fitted Had the manifold reversed New RCMPT07 turbo fitted Tein coilovers fitted Had Bob Rawle map it on Friday and I was shocked at the results I’m not one for chasing figures now a days but I was expecting around 450bhp It made a strong 485 bhp with 432 lbft at 1.5 bar thing is a animal Have a few plans for her just to tidy her up abit she needs a new carpet and a new steering wheel and a few other little bits and bobs doing and after 9 years of ownership I might finally be happy with her haha Not bad for a 16 year old WRX https://cimg3.ibsrv.net/gimg/www.sco...d14d3d520.jpeg https://cimg2.ibsrv.net/gimg/www.sco...f5aaa3f76.jpeg https://cimg0.ibsrv.net/gimg/www.sco...61a6a631c.jpeg https://cimg7.ibsrv.net/gimg/www.sco...c4f9a87e2.jpeg |
Originally Posted by the shreksta
(Post 12110771)
great stuff sam, the car has come along way since you had it mapped @ rcm all the way back in 2013 when i was there with you. i still miss the sound of my old silver one,i never could replicate the sound on my other 2 imprezas. keep up the good work buddy
|
All times are GMT +1. The time now is 02:34 PM. |
© 2024 MH Sub I, LLC dba Internet Brands