Ill say 330/310 as a rough guess
|
Originally Posted by gazzawrx
(Post 10925938)
Ill say 330/310 as a rough guess
|
326bhp
|
Originally Posted by Midlife......
(Post 10925930)
3rd Gear will let go on mapping or on the way to the rollers :)
I run 50/50 meth injection on my Bug WRX and it broke 2 gearboxes LOL Shaun |
Originally Posted by toneh
(Post 10925939)
Would you really share a mug with Busta ?
|
343:thumb:
|
Originally Posted by steve ex vauxhall
(Post 10925973)
343:thumb:
Don't forget I mapped it :) |
Lol the pistons will fly out at 343mph:D:lol1:
|
Originally Posted by toneh
(Post 10925982)
Bit optimistic mate , I would be ecstatic if it was that
Don't forget I mapped it :) Have faith in your work Tone, then you can sort mine out :thumb: |
Originally Posted by bustaMOVEs
(Post 10925984)
Lol the pistons will fly out at 343mph:D:lol1:
|
Originally Posted by steve ex vauxhall
(Post 10925987)
Maybe optimistic, but have more than enjoyed reading all your posts about mapping.
Have faith in your work Tone, then you can sort mine out :thumb: |
I ran my TD0516G at 325 BHP........water meth adds about 20/20....... BHP / Torque, maybe a bit more torque :0
My maths makes that 245 BHP and a broken gearbox :) Shaun |
Originally Posted by steve ex vauxhall
(Post 10925987)
Maybe optimistic, but have more than enjoyed reading all your posts about mapping.
Have faith in your work Tone, then you can sort mine out :thumb:
Originally Posted by Midlife......
(Post 10925991)
I ran my TD0516G at 325 BHP........water meth adds about 20/20....... BHP / Torque, maybe a bit more torque :0
My maths makes that 245 BHP and a broken gearbox :) Shaun Plug missfire |
Id say something similar to mine (vf24 18psi) airflow etc made guesstimation) 310 and similar torque with a little left over on safety margin. Stock wrx tmic wont be helping optomise it either.
|
Originally Posted by toneh
(Post 10925988)
bhp You turnip not mph
Only banter though, tbh if the car was gonna break then it would of done already. |
Dmbpm hopefully loooool
|
Originally Posted by brendy76
(Post 10925996)
Id say something similar to mine (airflow etc made guesstimation) 310 and similar torque with a little left over on safety margin.
I've been messing with wgd and target boost today and logging Don't like how my boosts dropping off in 3rd 3rd peaks at 3700/4000k @19psi then drops of quite quick to redline 4th peaks around the same revs @20 psi and drops to 12 /14 psi by the time it's hit redline and out of puff I'm not entirely happy but I'm leaving it for now |
Originally Posted by brendy76
(Post 10925996)
Id say something similar to mine (vf24 18psi) airflow etc made guesstimation) 310 and similar torque with a little left over on safety margin. Stock wrx tmic wont be helping optomise it either.
Originally Posted by bustaMOVEs
(Post 10926002)
Dmbpm hopefully loooool
|
Originally Posted by brendy76
(Post 10925996)
Id say something similar too mine (vf24 18psi) airflow etc made guesstimation) 310 and similar torque with a little left over on safety margin. Stock wrx tmic wont be helping optomise it either.
|
Originally Posted by toneh
(Post 10926018)
I've got fmic mate
|
Originally Posted by brendy76
(Post 10926029)
312 and 312 then :D
|
Originally Posted by brendy76
(Post 10926029)
312 and 312 then :D
|
Originally Posted by toneh
(Post 10926036)
Lol I'll be happy at 301 mate
|
Originally Posted by toneh
(Post 10926036)
Lol I'll be happy at 301 mate
|
What Bost control solenoid are you running ?
TD05 16G is a tough critter.......it will go over 300 without breaking into a sweat :) haun |
Originally Posted by CharlySkunkWeed
(Post 10926039)
Whoooooo , its going up ! It was 300 u'd be happy earlier !
Originally Posted by bustaMOVEs
(Post 10926046)
That's what my td04 made :)
Don't forget this is as much of a learning curve for me and a 80bhp improvement for £390 and that's for the turbo , up pipe ,exhaust , pump, fmic, aquamist kit And mapping now that would represent an achievement to me Consider loads spend more than that for an exhaust , which without a remap would result in pretty much a 0 bhp increase So I can't really be unhappy even with an extra 20 bhp Time will tell ! |
Originally Posted by toneh
(Post 10926072)
True but you didn't map it ;)
Don't forget this is as much of a learning curve for me and a 80bhp improvement for £390 and that's for the turbo , up pipe ,exhaust , pump, fmic, aquamist kit And mapping now that would represent an achievement to me Consider loads spend more than that for an exhaust , which without a remap would result in pretty much a 0 bhp increase So I can't really be unhappy even with an extra 20 bhp Time will tell ! |
Originally Posted by Midlife......
(Post 10926066)
What Bost control solenoid are you running ?
TD05 16G is a tough critter.......it will go over 300 without breaking into a sweat :) haun Like I say I've been messing and think I've got a happy medium There's lots to do and lots of improvements to make , but it's gonna be interesting to see where I've got so far |
i'll go for 307bhp :thumb:
|
I cant wait now ! How sad !
|
All times are GMT +1. The time now is 01:22 AM. |
© 2024 MH Sub I, LLC dba Internet Brands