Went ahead and fitted mine over the weekend, put the jet from the top mount and attached it to the bottom, just behind where my grille goes. May not do alot, but it certainly does more than a button on the dash not being attached to anything:
http://i307.photobucket.com/albums/n...4-15144607.jpg |
cant u just turn the headlight washers upside down ??? ;p
|
I am looking at relocating mine but am going to trigger it using a pressure sensor so it only squirts when on high boost.
|
Great work chap, this is still on my list of jobs to do, lol.
|
Would it not have looked better mounted in to the top section of bumper, underneath the number plate area facing down? Then you wouldn't have to see it so much.
Just a thought. |
As said before I mounted mine on the underside of the bumper (behind the number plate) using a Scania wiper spray jet, this is a long this piece of plastic with several (8 ish) jets in it. It only measures around 150mm x 15mm x 5mm and offers very good coverage on a FMIC imho. It looks discreet, works well, and never siphoned.
Rob |
Well done mine today.
Bought two twin exit spray heads from Halfords for pennies and a length of 4mm blue silicone hose from eBay for a few quid. Fitted the sprayers behind my number plate so not visible unless you lay down.. http://i1102.photobucket.com/albums/...3/e3343143.jpg I used my rear washer for the feed as rear wiper has been removed anyway. Ran the hose to the motor on the washer bottle with a pressure valve inline so they wouldnt drip. Works a treat . |
Fitted some braided hose today too along with a second catch can.
http://i1102.photobucket.com/albums/...3/2356edf7.jpg And two more gauges in a custom pod.. http://i1102.photobucket.com/albums/...3/f1265380.jpg |
I thought your ride was finished once and then you did some more and once again declared it was finished, now look:p
Ain't never gonna be finished:D |
It's done now mate..........
Well, just about |
You'll think of something else! Still thinking of a change of coilovers?
|
Yea still thinking about swapping these AST's for something. Keep meaning to have a ride over to yours to see what yours are like.
|
Aha! So it isn't finished, I knew it:p
Come over sometime one weekend, I'll give you a demo. I'm impressed with them, although I am beginning to think I should have paid a bit more for ones with rebound adjustment as well. |
All times are GMT +1. The time now is 10:13 AM. |
© 2024 MH Sub I, LLC dba Internet Brands