Thats a bargain :rolleyes:
I did my prosport gauges on my type r in about 3 hours i think including beer breaks so something must of went wrong for them to charge 13 hrs labour???

baited the hook

How much labour does your guy charge to remove a engine? :lol1:

13 hours is way too much mate.

Perhaps they quoted you that time/money so that it would put you off. Not all garages want to work with these types of car.

13 hours is ridiculous....

Thats over a day and a halfs labour for a garage.

If I REALLY disliked someone I would offer to charge them at those rates...

LOL

dunx

P.S. Even fitting five took me all morning, but two are just "stuck" ontop of the dash board.

it was power station that fitted the gauges,complete and utter rip offs!! 60 quid an hour plus vat. they machined a flanged,fixed a number plate bulb,swapped my brake discs around and changed brake fluid,fitted 3 gauges(oil temp,oil pressure,water temp) which i pre mounted into the pod but i didnt mount the pod to the dash board,i baught them the correct sandwich plate for these, the petrol cap needed a spring and my speedo wasnt working. they charged me £200 for parts including converter for the speedo,brake fluid,antifreeze,wires,plug and the grease on my ass when they raped me.23 half hours labour to do just this 5 hours work,they had the car for 2 weeks blaming the machineist,when i went to pick it up the speedo still wasnt working so had to leave it there and go back again,still wasnt fixed so just gave them a piece of my mind and came home with no money at all,skint,broke,robbed,raped,butchered etc etc worst of all im a **** for giving them the money!!!!!!!

POWER STATION are cowboys 13 hors to fit 3 gauges
 

POWER STATION ARE RIP OFFS BEWARE!!! THEY CHARGED 13 HALF HOURS TO FIT 3 GAUGES(OIL TEMP,OIL PRESSURE,WATER TEMP),10 HOURS TO FIX A NUMBER PLATE BULB,PETROL CAP SPRING,CHANGE BRAKE DISCS AROUND,FIX SPEEDO AND MACHINE A FLANGE.5 HOURS WORK TOPS,£60 QUID AN HOUR.THEY BILLED ME 23 HALF HOUR LABOUR PLUS £200 QUID IN PARTS PLUS VAT

13 hors, you cant call women that any more!!!

total rip off mate

13 HOURS TO FIT 3 GAUGES
 

THE EXCUSE WAS THAT THEY ARE CHEAP GAUGES AND THEY TAKE LONGER,WHAT A LOAD OF COBBLERS THEY ALL HAVE WIRES AND SENSORS NO MATTER HOW EXPENSIVE

was going to take mine there but thought better of it when they said they cannot remap autronics.

I do on a reqular basis, my mrs quite likes it...:norty:

....and you paid it without dispute?

:Suspiciou

IM AN IDIOT I PAID BUT THAUGHT ABOUT IT AFTER,I TRUSTED THEM

as above i would of told theme where to go is there something we are missing?

Have you talked to them b4 slagging them off??
mistake made?

it seems astronomical pricing to me

as above i would of told theme where to go is there something we are missing?

Have you talked to them b4 slagging them off??
mistake made?

it seems astronomical pricing to me

WHEN I SAT WITH MY FRIEND AND BROKE THE BILL DOWN I REALISED ID BEEN DONE FOR,I ASKED FOR SOME MONEY BACK BUT WAS REFUSED,IVE SPOKEN TO A SOLICITOR AND MY CASE IS STRONG AS EVERY TUNER I CONTACTED SAID IT WAS 5 HOURS WORK AT THE MOST AND THAT THEY ROBBED ME

MATE I PLEADED WITH HIM BUT HE SAID HIS DONE THE WORK,THE REASON HE GAVE FOR THE LENGTH OF LABOUR ON THE GAUGES WAS THAT THEY WERE CHEAP GAUGES

I SUPPLIED A SANDWICH PLATE FOR THE SENSORS,HE SAID HE HAD TO TAKE THE DASH OUT TO PUT THE WIRES IN

dash out to fit gauges???

something isnt right there!!

LOL... not really needed but still not 13 hours work... why didn't you do it yourself its easy, case of wiring from sensor through some holes in engine bay into car and then to gauges.

Cheap gauges or not, if they came with wiring diagrams it should of been a piece of p1ss.

If that's all true I won't ever be considering Power Station again!

IF I HAD KNOWN THEY WERE GOING TO ROB ME I WOULDNT HAVE GONE THERE.I THAUGHT THEY WERE PROFESSIONALS!!!!

Sorry mate should you not be on the ideal home web site...:D

3 threads complaining about them by you this evening

You're either very upset, or just joined up here to slag them off.... or both.