Oh well I cant realy comment,Ive only got a set of GT spec 2 headers, a 3 inch exhaust, APS CAI, and a remap and im running 360bhp / 350 lbs-ft of torque. If I was running methanol I would be about 10 on top of the bhp / lbs-ft figures
theres alot to be said for bolt ons! |
Originally Posted by chocolate_o_brian
(Post 8087242)
I only have 130 in my '$hitty' Pug - as someone put it:lol1:
As for my scoob ive always guestimate my figures around 330/340hp seeing as the bits i have on are the same as a lot on here do as well thus giving me an approximate figure, that and cars ive taken on suggest this figure possibly more who knows...... She runs around 1.4/1.5 bar |
Its not just the bhp / cock size competitors, its the people who have absolutely no concept of POWER TO WEIGHT and believe that any car putting out 250 bhp MUST be faster than one with 200 bhp etc...
Same applies to engine size, a 2.0 car has to be faster than a 1.6 regardless that one is a Mondeo and the other an Atom. Personally I blame Ebay, I dont think I've seen an Impreza on there yet that wasnt making at least 300bhp, even if bog standard apart from an STi badge stuck on the boot and a pair of furry dice. |
Originally Posted by hux309
(Post 8087335)
More like 125hp, 128 at best, 130 has never been reached without bits being slapped on, only a decent exhaust might add a few horses, induction kits do naff all on pugs. ;)
As for my scoob ive always guestimate my figures around 330/340hp seeing as the bits i have on are the same as a lot on here do as well thus giving me an approximate figure, that and cars ive taken on suggest this figure possibly more who knows...... She runs around 1.4/1.5 bar The system was modified (after a weld gave way), and is now totally straight through, no silencers etc except for the backbox. Does feel a little perkier, to say with the above figure, she was running lean too. |
I just have to have a giggle when lads in saxos and corasa's claim to have 300bhp. Now come on!!!!
|
Originally Posted by chocolate_o_brian
(Post 8087708)
Did have a rolling road print out from the previous owner. With a mild steel Peco exhaust system (pre-car model too), she was running just over 133bhp.
The system was modified (after a weld gave way), and is now totally straight through, no silencers etc except for the backbox. Does feel a little perkier, to say with the above figure, she was running lean too. |
my 4 door metro with its skyline induction kit is pushing 1200bhp :lol1: :lol1:
|
well my wrx is 424.5 bhp:razz:
|
Originally Posted by MikeCardiff
(Post 8087413)
Its not just the bhp / cock size competitors, its the people who have absolutely no concept of POWER TO WEIGHT and believe that any car putting out 250 bhp MUST be faster than one with 200 bhp etc...
Same applies to engine size, a 2.0 car has to be faster than a 1.6 regardless that one is a Mondeo and the other an Atom. Personally I blame Ebay, I dont think I've seen an Impreza on there yet that wasnt making at least 300bhp, even if bog standard apart from an STi badge stuck on the boot and a pair of furry dice. |
It's not just limited to car's either..
I owned a stage 1 Seadoo jetski (running 215-225hp) which could knock on 70mph on open water... went to a wedding and unfortunatly got introduced to a total ojiot who was spouting on about a 90mph Yamaha he'd been on... I pointed out (at the time) the world record was only 86mph on a hugely modded Yam in the States...and that it took a mile or so to get to that speed (big impeller and thus slower acceleration) his answer... "well this one was the same spec... I been on it and it was going 90mph around the lake we were on..." toss pot.... no idea.... he was prob going 50mph max... |
My 2 litre
http://i258.photobucket.com/albums/h...ctualgraph.jpg and 2.5 http://i258.photobucket.com/albums/h...sti/graph2.jpg Any excuse to post them up :lol1: ;) Banny |
hi banny
you live near manchester? saw one like yours there about 2 weeks ago. |
Mine is more than banny's :D
|
You should try sitting on the same table as a bunch of Cossie owners.
"Mine's 300bhp, well mines 400bhp, well MINES 500bhp".....then someone notices I'm not joining in on the banter and pipes up witha snigger: "What's that NSX of yours got, AL?" 280bhp, and my penis is 10" long and 3" wide :lol1::smug: |
I've got a shiny silver sticker that says 266 on it.
Oh, and my penis is 2" long and 9" wide, the plastic surgeon read the surgery notes wrong:( |
Hey Banny - mine's bigger than yours :D:D:D
http://img.photobucket.com/albums/v1...hpScoobyRR.jpg Look's the part too :D http://img.photobucket.com/albums/v1...andsHatch1.jpg |
We all know that all scoobies make over 500hp at the pubs :D
Terry, care to share your spec, turbo, boost and fuel used for that graph? |
Christ, too much to mention in one lifetime - but basically it's a 2.33 CDB with higher spec cams, and fully ported heads, a rotated Turbo Dynamics hybrid turbo based on a GT32 (we believe), 1000cc injectors, Simtek ECU running boost at 2.2 bar max (on the road - less on the rollers). Fuel used for that run was Sunoco GTPLus - 109 RON race fuel. The run on VPower made 570bhp.
|
try this for size,
0 - 60mph in 1.9 seconds ......... oh and a stonking 2.9bhp and 40,000 RPM http://i535.photobucket.com/albums/e...d/DSC00179.jpg ;) |
Originally Posted by IainMilford
(Post 8093779)
try this for size,
0 - 60mph in 1.9 seconds ......... oh and a stonking 2.9bhp and 40,000 RPM http://i535.photobucket.com/albums/e...d/DSC00179.jpg ;) http://www.lafferty.ca/wp-content/up...05/fail-24.jpg |
sorry couldn't resist ..
|
Originally Posted by IainMilford
(Post 8093948)
sorry couldn't resist ..
|
LOL !
|
:brickwall http://i535.photobucket.com/albums/e...d/DSC00180.jpg :)
|
Originally Posted by El Cat
(Post 8086834)
mine is near enough standard apart from panel filter and backbox!
must take it from 215BHP to at least 300 bhp as thats what most EBAY chavs say cars are running that they are selling! you're right, how many young lads with a Sti tell you it's doing 340bhp. lol then you see its a MY94 and sounds like a shed. |
Thing is, power readings differ significantly form dyno to dyno. I know one dyno here that claims a standard MY02 WRX puts out 90 - 95kW (120 - 126bhp) atw, another claims 130kW (172bhp) atw.
Looking at scoobynet I've never seen a WRX that makes less than 210bhp??? My MY01 has a new EJ257 forged shortblock, CP pistons, Eagle billet rods, AVO450s turbo, Deatschwerks 750cc injectors, polished and ported heads, APS TMIC, ECUtek 2 remap, catless up-pipe, 3" catback exhaust and cold-air induction kit with K+N filter. It makes 246kW atw (328bhp) at 21psi boost. Thing is, the highly respected builder tells me that the 450 bhp turbo is at it's limit.........does this mean that the dyno he uses isn't 'corrected', or should I mutiplying my power figures by 1.3 to get the proper 'bu11****' figure????:wonder: |
Originally Posted by speed.46
(Post 8086756)
AS THE TITLE SAY'S I REALLY GET PI*SED OFF WITH PEOPLE SAYING WHAT HORSEPOWER YOU GOT,AND THEM SAYING MORE AND MORE :mad: ..NEVER MEET SOMEONE WITH A LOWER BHP THAN MINE YET :lol: .
MINE IS 280 AND PLENTY FAST ENOUGH.HAD ONE TODAY 380 :lol: . REALLY GETS ON MY NERVES. ANYONE ELSE?. I FEEL BETTER NOW, AFTER THAT MOAN LOL |
Originally Posted by Paul Habgood
(Post 8100572)
Simple, ask to see the dyno printout, ask where it was mapped and by who.
http://i69.photobucket.com/albums/i7...rx/RRpower.jpg Mapped by no idea who, hasn't been remapped. :D |
my wagon has 400 bhp and its stock ... a uk turbo engine in the front and a sti engine sat in the back not conected up so does that count pmsl lol .This reminds me of the rs turbo era when people used to get the 190 chips and say it had 190 bhp !!! and whats power when you a complete knob head who cant drive lol thats my 2p's .
|
I HAVE A MAGIC CD PUT IT IN YOUR CAR AND RUN THE SOUNDWAVES PLAYED VIBRATE THE ENGINE ANDMAKE GOFASTER AT LEAST 50BHP EXTRA ON ANY CAR IN STOCK NOW ONLY 30£ NO PAYPAL BANK TRANSFER ONLY SHIPPED FROM HONGKONG
;) |
All times are GMT +1. The time now is 05:44 AM. |
© 2024 MH Sub I, LLC dba Internet Brands