ScoobyNet.com - Subaru Enthusiast Forum
Page 2 of 2
1
2
Show 30 post(s) from this thread on one page

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   General Technical (https://www.scoobynet.com/general-technical-10/)
-   -   My alternative to the APS Cold air kit - Guidance needed please (https://www.scoobynet.com/general-technical-10/398651-my-alternative-to-the-aps-cold-air-kit-guidance-needed-please.html)

StickyMicky 15 February 2005 08:50 PM
im replacing it with a white wing that hasnt got a big dent in it lol

Bob Rawle 15 February 2005 09:31 PM
There is no need to loose the maf, mount it close to the air intake ie in std position and then attache the extended filter, that may be ok for you. The distance effect is quite startling isn't it. The APS also moves the maf too far away from the inlet, I am talking about "keep it close".

bob

Aztec Performance Ltd 16 February 2005 01:08 AM
Originally Posted by 911
Interesting subject; some questions please of you experts:
1
Why is the stock panel filter with the resonator cut/opened/removed from the front wing not work as well as all the mods?
Cold air is drawn from the inner wing only if you seal off the hole from the headlamp scoop to the resonator.
2
Can the engine (in my case an Sti v3) get enough air with the above mod?

911
I would be interested to know (with figures) how effective the std airbox is with much of the box cut away and lots of cold air fed to the filter. The std size filter has a big enough surface area?

Bob

Aztec Performance Ltd 19 February 2005 02:51 PM
bttt

harvey 19 February 2005 07:21 PM
the O/e air box with a K+N is good for well over 320 bhp but I do not know how much over.


All times are GMT +1. The time now is 08:47 PM.
Page 2 of 2
1
2
Show 30 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands