No one with anymore advice/ideas/thoughts? :confused:
|
I'm running over 500bhp in my daily hatchback (for over 4 years now without issue) ,, pm me if you want to chat about it and what spec iv got
|
What does it take to get reliable 500whp? |
Originally Posted by alcazar
(Post 12038605)
Errr, is the answer, "A Mitsubishi Lancer engine?"
|
Originally Posted by domino46
(Post 12038149)
I'm running over 500bhp in my daily hatchback (for over 4 years now without issue) ,, pm me if you want to chat about it and what spec iv got
|
Originally Posted by Dazzles Fiesti
(Post 12038647)
Thanks, I'll do that :thumb:
cheers maz |
Originally Posted by domino46
(Post 12038149)
I'm running over 500bhp in my daily hatchback (for over 4 years now without issue) ,, pm me if you want to chat about it and what spec iv got
Originally Posted by scooby2.5maz
(Post 12038663)
pm me also if you want , im over 500 on my classic 2.5.
cheers maz |
Can't you both just post your specs here?
|
Originally Posted by alcazar
(Post 12038605)
Errr, is the answer, "A Mitsubishi Lancer engine?"
So, I'm bringing this back to the top as it's starting to be very relevant for me. Though the car this will be going in has changed, the intention is the same (or there about!) Not that it should totally matter but for those not wishing to search, this is what it will be going in:- https://www.scoobynet.com/projects-4...ubaru-sti.html This has all come about because I'm changing my track car. Well, more specifically, I'm retiring what I used last year. So, I'd like to jog peoples memories and get an up to date feeling of the best way forward. These are our thoughts for the build but they're not set in stone, please give your advice on what you think is best, maybe what make to buy or any information that might help? 2.0 CDB Main line correction Torque plate bore and hone (as small as needed) New crank New rods New pistons Static & Dynamic balance of the rotating assembly Dual AVCS heads *need input on cams and valves* Dry sump system Possibly 2.5 N/A inlet manifold Still looking at turbo choice injectors sized to match I'm sure there is a lot more that will come along but this is our first thoughts. In reality, the number we see at the end of the day doesn't matter. What is more important is how tractable is it and how that translates when it's on the track. I will endeavor to keep you all updated :thumb: |
Anyone??
|
Well as you know from my 2.1 stroker thread, I have a classic track car currently at 380bhp. So admittedly nowhere near 500 but I have been around race tracks my whole life and in any track vehicle the number one factor is always heat management.
- External oil cooler with effective ducting - Power steering rad - Possibly a fuel cooler if under bonnet temps get high - Thicker alu rad - Swirl pot & additional 044 fuel pump. Plus fine grade inline filters Regarding power figures, if reliability is key then I'd have thought that a good place to look would be a 2.35 stroker? |
The mitsi engine makes a good bit extra power and torque than a comparable EJ engine but the gearboxes are severely stretched past 550bhp- my friends evo 8 has damaged a box every year he's owned it😂,,,at least a (fresh) 6 speed will take 650 all day long if not too many drag starts
|
Originally Posted by madwrx
(Post 12070927)
at least a (fresh) 6 speed will take 650 all day long if not too many drag starts
And to be fair, the more we're looking at this, I don't think I'm even going to need 500! If anything, I just want it to be as reliable as we can make it and I feel by going dry sump and main line correction, we're doing all we can :thumb: |
HI there, I've been running over 650bhp for five years now, it is my track/weekend toy and not a daily (these days usage is a lot less but I still enjoy fettling and getting out to a few track days each year. Brief spec as follows;
2.35 based on an EJ22T (22b block) and built by Paul Finch Wiseco ceramic coated pistons Crower rods Heads are big port JDM heads with some porting, lateral cams/supertech valves RCM group N baffled sump Syvecs S6 ecu ASNU 1500 cc injectors Flex fuel Billet GT35R I have had the odd issue here and there but nothing engine related which is what I think you are referring to "reliable 500whp", with such a big build there are going to be problems when you are running components at a far higher output then they were originally designed for and this stretches beyond the engine itself, (brakes/suspension/drivetrain etc) and a build like this requires you to keep on top of things a lot more! |
I am running 628 bhp 601lbs on a 2.5 cdb 14mm head studs gt3582hta it's cost 45k+
|
Originally Posted by IainMilford
(Post 12071828)
HI there, I've been running over 650bhp for five years now, it is my track/weekend toy and not a daily (these days usage is a lot less but I still enjoy fettling and getting out to a few track days each year. Brief spec as follows;
2.35 based on an EJ22T (22b block) and built by Paul Finch Wiseco ceramic coated pistons Crower rods Heads are big port JDM heads with some porting, lateral cams/supertech valves RCM group N baffled sump Syvecs S6 ecu ASNU 1500 cc injectors Flex fuel Billet GT35R I have had the odd issue here and there but nothing engine related which is what I think you are referring to "reliable 500whp", with such a big build there are going to be problems when you are running components at a far higher output then they were originally designed for and this stretches beyond the engine itself, (brakes/suspension/drivetrain etc) and a build like this requires you to keep on top of things a lot more! I understand what you're saying about the rest of the car and we're going to make sure all that is good as well. Due to the packaging of the car, we've had to do some different things anyway but definitely going to try and keep everything as 'Top Notch' as possible :thumb: |
Originally Posted by john_666
(Post 12072059)
I am running 628 bhp 601lbs on a 2.5 cdb 14mm head studs gt3582hta it's cost 45k+
|
Originally Posted by Dazzles Fiesti
(Post 12072118)
Thanks for your spec, good to see what everyone else has chosen to use.
I understand what you're saying about the rest of the car and we're going to make sure all that is good as well. Due to the packaging of the car, we've had to do some different things anyway but definitely going to try and keep everything as 'Top Notch' as possible :thumb: |
Originally Posted by IainMilford
(Post 12072125)
Sounds interesting, look forward to seeing updates :)
That's the track car ;) |
All times are GMT +1. The time now is 10:23 PM. |
© 2024 MH Sub I, LLC dba Internet Brands