Originally Posted by Major_Sarcasm
(Post 10788699)
Edited for commercial content.
Please contact the webmaster for information on becoming an AA |
Originally Posted by 4u2nv2
(Post 10792672)
is this the boy, 360459658464
ebay |
my v1 sti boosts at 15psi standered will this chip give me more boost, also i have full 3" itg panel filter and walbro. is the chip going to make much of a diiference
|
Originally Posted by 4u2nv2
(Post 10793322)
my v1 sti boosts at 15psi standered will this chip give me more boost, also i have full 3" itg panel filter and walbro. is the chip going to make much of a diiference
|
how do i go about getting a chip? send a blank one to you and pay for a map to be loaded? cheers
|
major, i bought the chip you double cheaked for me, thanks for that. also i cheaked my ecu today and (pink sticker SA ecu) it hasent got the carrier for the chip. mmmmmmm is fitting the carrier a simple job. is this still 80£ as ive provided my own chip, how much would it be if i send you my ecu i would also like the switch option. thanks for your time buddy.
|
lol these early v1 sti are only 250bhp stock. cant wait for this..
|
Originally Posted by xcore
(Post 10794373)
how do i go about getting a chip? send a blank one to you and pay for a map to be loaded? cheers
Originally Posted by 4u2nv2
(Post 10794482)
major, i bought the chip you double cheaked for me, thanks for that. also i cheaked my ecu today and (pink sticker SA ecu) it hasent got the carrier for the chip. mmmmmmm is fitting the carrier a simple job. is this still 80£ as ive provided my own chip, how much would it be if i send you my ecu i would also like the switch option. thanks for your time buddy.
We won't fit a switch as we don't recommend it. Up to you afterwards of course, easy to do. PM me if you want to go ahead. |
thanks major, ive got the carrier, i got 3 for 1.80£ lol. i will give you a pm when i have the chip and carrier, chip could take a little while as its coming from over seas. thanks major you have been very helpful. phil
|
Hello I'm searching a woy to change ma td05 to td04. Could you give me a chip for this??
Would the 90degree Td04 perform similar to the 1997 standart td04 with straight input? |
I suppose it begs the question: why would you want to? ;)
|
iv just bought a ecu with a polar chip...took the old ecu out...Z4 and took a look inside..it has 1 if these chips init!!!
so now I have a prova and polar plus this Z4 with the above chip!!! |
Hi I'm new to this but I have fitted a scoobyecu daughter board to my standard u8 main board after having to fit a plug to the board first, the picture at the top of this thread looks like an eclipse chip and nothing like my scoobyecu so I'm a bit confused on that, also if anyone can help, I had a dyno done yesterday and its reporting heavy engine det and lean fuelling even thoe fuel pressure is good :( I've only heard good reports about scoobyecu so what could be wrong? Any input would be great thanks guys
|
I think you're getting confused as to what is or is not a 'ScoobyECU'.
The chips that I have supplied via this thread are known as ScoobyECU. The daughter boards that hold 2 separate chips that plug into the socket are something else entirely although any of these solutions can be flashed with the same maps. Mine, Eclipse, Polar Performance, they're all the same Fujitsu EPROMS, just slightly different maps. Could be any map currently flashed to your daughter board. Did you reconnect the resistor and run the car on the dyno again to see if the stock map was OK? I really wouldn't recommend driving on boost until you get this problem rectified. |
Oh ok I think I get it, so the board I have fitted is off a trusted seller and tells me it's a genuine "scoobyecu" it's the red board with the two chips you have described. I came on here and seen good reports about them so I bought it.
But am I right in thinking (by what your telling me) that the reviews are not worth anything as the chips can have anything on them? I also have one of those Fujitsu chips but no idea what is on it, could be one of yours for all I know. My next plan was to put a switch in place of j1, take it back for dyno with that Fujitsu chip and just try all of it lol. I'm just disappointed as I thought the "scoobyecu" was the balls. If all fails I will be happy to purchase this chip off you if you tell me it will suit my car. |
The chips can be reflashed with whatever map you want. Either the Fujitsu chip or the daughter board with the twin chips could have any old map on them. Difficult to tell.
Good plan with the switch. Run the stock ECU map on the dyno and ensure your car doesn't have any issues. Then try the Fujitsu. If you're not happy with either of your maps, you could send the Fujitsu chip to me and I can reflash with the map that I've been supplying via this thread. |
Originally Posted by Major_Sarcasm
(Post 11232825)
I think you're getting confused as to what is or is not a 'ScoobyECU'.
The chips that I have supplied via this thread are known as ScoobyECU. The daughter boards that hold 2 separate chips that plug into the socket are something else entirely although any of these solutions can be flashed with the same maps. The name 'ScoobyECU' was then adopted by the community to refer to pretty much any thing (rightly or wrongly) that fitted into the spare 28 Pin DIL slot on the Pre96' ECU. |
Thanks for the feedback guys, I haven't had time for the dyno just yet but I have put a switch in place of j1, as this is my daily driver I'm wanting safety as a priority, my car is a 95 wrx fairly standard, full decat from the turbo, baileys d/v, piper x induction, td05, the engine is the ej20 and is not closed that's it as far as I know, without doing the dyno is it safe to just run the standard u8 ecu ? Am I benefiting at all? And am I right in assuming by connecting the j1 (via switch) it will ignore the daughter board ? I've also been told that the engine detonation at high revs can be helped with a bigger intercooler ?? What's your thoughts on this.
Thanks in advance from a rather desperate scooby owner :/ |
Ultimately I do want to run the daughter board as its quite an aggressive map (that's what the dyno guys tell me) and its definitely fun when I'm using it but this det is even with telco 99 in it which is far from me so I'm planning on using 97 super ASAP
Thanks again |
Originally Posted by Scott.T
(Post 11236037)
WRONG....
Originally Posted by Jason1978
(Post 11236664)
Thanks for the feedback guys, I haven't had time for the dyno just yet but I have put a switch in place of j1, as this is my daily driver I'm wanting safety as a priority, my car is a 95 wrx fairly standard, full decat from the turbo, baileys d/v, piper x induction, td05, the engine is the ej20 and is not closed that's it as far as I know, without doing the dyno is it safe to just run the standard u8 ecu ? Am I benefiting at all? And am I right in assuming by connecting the j1 (via switch) it will ignore the daughter board ? I've also been told that the engine detonation at high revs can be helped with a bigger intercooler ?? What's your thoughts on this.
Thanks in advance from a rather desperate scooby owner :/
Originally Posted by Jason1978
(Post 11236666)
Ultimately I do want to run the daughter board as its quite an aggressive map (that's what the dyno guys tell me) and its definitely fun when I'm using it but this det is even with telco 99 in it which is far from me so I'm planning on using 97 super ASAP
Thanks again |
do you still reflash chips?? iv a chip that has no markings on...id like it reflashed??
|
Occasionally, yes. Pop a PM my way and we'll see what we can do for you.
|
All times are GMT +1. The time now is 05:55 AM. |
© 2024 MH Sub I, LLC dba Internet Brands