Originally Posted by Mad Hammer
(Post 9273890)
Is there now 2 of us ?
Hi, as the churchill dog says ohhh yes :D more to follow :thumb: cheers Kev |
Originally Posted by The Gaffer
(Post 9273848)
Hi,
would that be a 35 R BILLET seen somewhere in surrey belonging to Mike Latimer :D Cheers Kev |
Originally Posted by The Gaffer
(Post 9273924)
Hi,
as the churchill dog says ohhh yes :D more to follow :thumb: cheers Kev |
|
Originally Posted by banny sti
(Post 9274056)
They are the previous standard 35R ones mate |
Oh right didnt realise he has changed again lol
Banny |
Originally Posted by Jolly Green Monster
(Post 9273952)
could be ;)
|
Originally Posted by Mad Hammer
(Post 9274049)
Get those graphs up guys !
Originally Posted by Granby
(Post 9274462)
Blimey if Mike's got a 35 billet whats if producing now :eek:
Hi, it's not finished testing yet :) All will be revealed when testing is over :thumb: Cheers Kev |
Originally Posted by Granby
(Post 9274462)
Blimey if Mike's got a 35 billet whats if producing now :eek:
|
Originally Posted by The Gaffer
(Post 9274684)
Hi,
it's not finished testing yet :) All will be revealed when testing is over :thumb: Cheers Kev |
Originally Posted by Mad Hammer
(Post 9274699)
Tease :) Given what the standard 35 did on race fuel could we see 700 ! ?
Hi, I very much doubt it, bit too optimistic that :D Cheers Kev |
Originally Posted by The Gaffer
(Post 9274702)
Hi,
I very much doubt it, bit too optimistic that :D Cheers Kev Was 658 with race fuel on a standard 35 so can't be far off, 20% meth mix was similar to mine but lower boost. Very similar specs bar the inlet manifolds |
what spec GT3076 turbo would you advise as a BILLET twin entry option?
|
Originally Posted by Ilya
(Post 9274802)
what spec GT3076 turbo would you advise as a BILLET twin entry option?
Hi, our best results are on a GT3076 billet with a .63 housing. :thumb: We can however supply with any housing you like, the twin entry option is not only heavy but requires two wastegates. Cheers Kev |
2 Attachment(s)
Hi,
two more for testing :luxhello: The SC36 BILLET Attachment 53212 The SC40 BILLET Attachment 53213 Here we go again :thumb: Cheers Kev |
Brilliant! Can't wait to see the results of those bad boys ^^^. :norty:
Kev, will the 36 be tested on a 2.0... if not the 40, too? Those two suckers will stir up a lot of interest amongst a large SN demographic, I reckon... :) |
Is there a GT35/42 Billet ?
|
Originally Posted by The Gaffer
(Post 9274892)
Hi,
our best results are on a GT3076 billet with a .63 housing. :thumb: We can however supply with any housing you like, the twin entry option is not only heavy but requires two wastegates. Cheers Kev |
:thumb:
|
2nd billet 35R goes well :) http://bbs.22b.com/cgi-bin/ultimateb...c;f=1;t=005806
|
3rd one will be mapped tomorrow on a 2.35, this one will have N20 assisting so should be 'interesting' lol
Andy |
Originally Posted by P1Marty
(Post 9274970)
Is there a GT35/42 Billet ?
Hi, its not one we do but I think Laterall performance stock the non billet ones. Cheers Kev |
Work in progress.....
We got to 1.6 bar of boost before meeting a restriction, suspect it is the smallish air filter so it will be redesigned before next session next week. Ran with the NOS and it made a big difference to both power and spool up. Without N20 1.0 bar at 4100 and 1.6 bar at 4450 (in 4th no avcs, sti4) With N20 coming on at 3250rpm 1 bar boost at 3400 and 1.6 bar at 3500rpm ! Andy |
not much difference then ;)
|
Mikes 35R billet today on 20% meth
http://photos-f.ak.fbcdn.net/hphotos..._7475722_n.jpg http://photos-h.ak.fbcdn.net/hphotos..._7178198_n.jpg 1.86bar.. lol decision made not to try race fuel tonight.. not 100% sure the engine will take what the turbo will flow and Mike drives it very hard. Simon |
Impressive think we might have to go for it hey simon
|
Originally Posted by wrxbart
(Post 9280619)
Impressive think we might have to go for it hey simon
|
Originally Posted by Jolly Green Monster
(Post 9280627)
oh yes.. your new car is going to be even more mental than the old one :)
|
Originally Posted by wrxbart
(Post 9280693)
:lol1: just need to pull my finger out now and get it done:)
|
Originally Posted by Jolly Green Monster
(Post 9280709)
yep.. or give that nice new shell to me :)
|
All times are GMT +1. The time now is 06:23 AM. |
© 2024 MH Sub I, LLC dba Internet Brands