so ive decided to take the chargespeed kit off


and go standard



new front and rear strut braces will be on
and a sparco steering wheel



need some blue fog covers if anybody has some
also, swapping my seibon carbon bonnet to a standard sti bonnet soon

wiley

 

Hi Wiley i have fogs,but no foglight cover,if you want PM me.
Jura

 

ive used the fog wiring for something else, so fogs will be no good im afraid
thanks anyway

wiley

 

You are selling front bumper?
And for how much you are looking?

Jura

 

the break ducts cost me £270, splitter was £300. so tbh i'll probably keep the bumper unless you can give me around £350

wiley

 

Hi Wiley i pass this to my friend,which looking for this bumper

Jura

 

cool jura.
just attempted fitting the steering wheel. looks like i got the wrong boss kit (although it does say impreza, must be for classic)
jon, can you give me the link for the hub kit when you see this

wiley

 

I think i have its same hub/boss kit as you
Which model you have on box its not printed:
HUB K7310 SUBARU WRX
MK7310R

 

were did you get that sparco wheel from and how much i want 1

 

Here you go mate, although I think the splines are same classic and newage

http://www.rhdjapan.com/works-bell-s...-59377?nflag=1

 

the spine i believe is the same, its just where th hole is where you pop the wire through was too small. probably could have DIYd it but im useless at DIYing. the hole is too small to pop the tab thing where the wires come from

wiley

 

its a sparco 325 - 350mm diameter and 90mm dish i think, you can get it from demontweaks

wiley

 

Is the car running, if so I'm around early part of next week if you want me to look at it.

 

yeh, car is running. i'll take a few close up pics to show you what i mean

wiley

 

the hole in picture wont slot in to the connection tab



wiley

 

The Works one is about twice the size. The tab iirc is plastic so I would probably trim that. I wouldn't open up the boss because I wouldn't know where the structural strength is in it

 

No Prodrive bumper??

 

i would, but they are rare as ****

wiley

 

hunt about It will be worth it, been hunting for some blobeye parts but everyone just seems to have bugeye stuff...

 

Have to agree with Guv, you could use your standard bumper until you find one, but they do look the dogs

Hmmm!!! DBM Prodrive edition

 

its gonna look good . subtle and stealth

 

You're not wrong Dan, Wiley's seen the Work Bell one and my car and knows what they're like but it is twice the price.

 

Here you go Wiley, just what you need

http://www.japperformanceparts.co.uk...p?ID=100866150

 

Here you go Wiley, just what you need

http://www.japperformanceparts.co.uk...p?ID=100866150

 

got my mate to modify the boss, fits fine now

wiley

 

morettes off, waiting for my sti ones which are coming in next week so wrx ones in atm




wiley

 

i'll need to get the wiring/ adaptor made for the sti lights, might need some help... looking your way again jon, let me know how easy they can be done (the headlights are from a uk prodrive with HID kit fitted)

wiley

 

Is it an aftermarket HID kit?

Shouldn't be too difficult, but I'll need to buy some bits to do the job properly (not expensive so don't panic) - drop me a line when you've got the lights and the easiest thing would be to bring the car around and I'll fit them and do the complete wiring job