hi just a quick question will a blitz nur spec r centre and rear removed from a 03 blob eye fit a x reg bug eye with out cutting and shutting thanks steve

 

Yes

 

thanks for the quick reply mate sweet

 

help please go the blitz tried to fit it today but it came up to short i think the decat front pipe is shorter than standard 2 cats but have just found out theres a difference in the blitz systems depending weather it jdm or euro anybody know what the difference is between the two, also think the down pipe is from a classic as the o2 sensor is at the top behind the turbo and the bug eye is normally down lower?

 

Sounds like one for Fiestaboy!!!

 

Classic downpipe is shorter than the newage one - however both systems are the same overall length, and are interchangeable if you are swapping the entire system from the turbo back. The only other difference is the orientation of the front hanger on the backbox (which can just be left disconnected)

Sounds like you've got a classic downpipe fitted.

 

i think i got a uk spec blitz nur and not a jdm one would the problem lie there different length centre pipes my 1st though was as you say classic down pipe as the system does poke out the back a bit and the lambda sensor at the top,but how can i get around it steve, ps anyone local to hillingdon mind having a ganda with me two heads better than one and all that

 

Cut the flange off the centre section and extend it with some 3" stainless pipe, then TIG it together so that it meets your downpipe correctly.

 

that would be my last option what about fitting a uk spec down pipe/ or will they not fit i would have thought they would unless you know any different steve cat

 

just to update fitted the original down pipe i bought,then i put up the decat 3rd cat section with lambda hole ,hung the blitz centre and rear section and hay presto its the right lenght but heres the problem 1=the lambda sensor does not reach the hole when plugged in loom to short ill have to extend the wires 2= the flange where it meets the blitx centre section is the wrong size to small and the lip were the cone gaskets sits is to big what a fooking nightmare steve

 

Your downpipe is probably 3", and the blitz tapers to 2.5" to mate to the factory downpipe. You need to fit a 3" flange to your blitz or, as I did, get a different centre section.

 

hi mate what a mare! the down pipe is a standard wrx cat type the 3rd decat bit is a 2.5 inch decat pipe witch is fine the problem is the flange where the bolt holes are is to small so cant get the bolts through the flange size needed is hole to hole 4.5 inch the decat is less than that, the pipe looks like a made up thing welding not brill gonna try a chap i know in hayes tomorrow to weld the flange i have of another pipe i orderd that was wrong but does have the right size flange (thats a original subaru part steel but will do) or my other option is a standard uk 3rd cat if any one has one free or very cheap..

 

hi people i could do this myself at work but will be hard to find the time and the boss is an **** so i need someone on here who has a welder and maybe free before the england game tomorow so i can weld my flange on my exhaust got somone today to cut of the flange and spot weld its on there but need realigning and then welding help any one.....i give em a drink.steve