my new 06 blob widetrack..perrin mods
Thread Starter
Scooby Regular
iTrader: (1)
Joined: Feb 2007
Posts: 255
Likes: 0
From: chesterfield,derbyshire
my new 06 blob widetrack..perrin mods
hi guys,this is my 2nd sti and im loving this at the moment,coming from a highly modded supercharged civic type r that i built and owned for 6 years i needed something more practical and comfy.so saw this advertised local and went for it.
rare 06 blob in cyrstal grey,immaculate condition etc.
sits on prodrive springs,genuine prodrive pff7`s all unmarked.3"stainless exhaust.
scoobyclinic is only 10 mins away so i called in to get a lot of perrin parts.
perrin wing stiffies
perrin belt cover
perrin radiator cover
perrin radiator mounts
perrin battery clamp
perrin pitch stabaliser
perrin rear roll bar links
perrin short ram intake kit
whiteline 22mm adjustable rear roll bar
whiteline rear diff support bushes
ht autos sti style front spoiler
just ordered a zunsport black lower grill
rare 06 blob in cyrstal grey,immaculate condition etc.
sits on prodrive springs,genuine prodrive pff7`s all unmarked.3"stainless exhaust.
scoobyclinic is only 10 mins away so i called in to get a lot of perrin parts.
perrin wing stiffies
perrin belt cover
perrin radiator cover
perrin radiator mounts
perrin battery clamp
perrin pitch stabaliser
perrin rear roll bar links
perrin short ram intake kit
whiteline 22mm adjustable rear roll bar
whiteline rear diff support bushes
ht autos sti style front spoiler
just ordered a zunsport black lower grill
Thread Starter
Scooby Regular
iTrader: (1)
Joined: Feb 2007
Posts: 255
Likes: 0
From: chesterfield,derbyshire
thanks guys.
been busy today fitting some parts.
fitted the perrin pitch stabaliser
perrin short ram intake
rear roll bar and links
whilst the intercooler was removed to fit the pitch bar i decided to do something about the horid looking corroding intercooler so i sanded it all down,primed and applyed some black wrinkle paint to match the perrin parts,also painted the dump valve to tidy it up.looks so much better.
alos fitted the rear 22mm roll bar and perrin links and feels so much better,combined with the centre diff theres much more front end grip.
been busy today fitting some parts.
fitted the perrin pitch stabaliser
perrin short ram intake
rear roll bar and links
whilst the intercooler was removed to fit the pitch bar i decided to do something about the horid looking corroding intercooler so i sanded it all down,primed and applyed some black wrinkle paint to match the perrin parts,also painted the dump valve to tidy it up.looks so much better.
alos fitted the rear 22mm roll bar and perrin links and feels so much better,combined with the centre diff theres much more front end grip.
Last edited by brens.scoob; Jan 11, 2014 at 06:25 PM.
Trending Topics
Thread Starter
Scooby Regular
iTrader: (1)
Joined: Feb 2007
Posts: 255
Likes: 0
From: chesterfield,derbyshire
Thread Starter
Scooby Regular
iTrader: (1)
Joined: Feb 2007
Posts: 255
Likes: 0
From: chesterfield,derbyshire
Thread Starter
Scooby Regular
iTrader: (1)
Joined: Feb 2007
Posts: 255
Likes: 0
From: chesterfield,derbyshire
yea the perrin gear is top notch,just need to get a couple of other things then i just about have the complete list.
also need to get a load of new bolts etc to replace the corroded ones.and remove and paint alot of the brackets etc.
Scooby Regular
Joined: Dec 2002
Posts: 1,160
Likes: 0
Scooby Regular
Joined: Apr 2012
Posts: 53
Likes: 0
From: Maidstone
Nice blob that bud!.....
I had loads of Perrin bits on my wrx300. Good quality & good looking stuff!..
Good name too that......"brens scoob".
I had loads of Perrin bits on my wrx300. Good quality & good looking stuff!..
Good name too that......"brens scoob".
Last edited by Brensscooby; Jan 12, 2014 at 02:28 PM.
Thread Starter
Scooby Regular
iTrader: (1)
Joined: Feb 2007
Posts: 255
Likes: 0
From: chesterfield,derbyshire
Thread Starter
Scooby Regular
iTrader: (1)
Joined: Feb 2007
Posts: 255
Likes: 0
From: chesterfield,derbyshire
Scooby Newbie
Joined: May 2013
Posts: 19
Likes: 0
From: Maidstone
Not to bad thanks, i've got a good base, it just needs tweaking to my standards. Had my first proper hoon since i've bought it at the weekend and it was ace
Things are in the pipeline it's just waiting for things to arrive and finding time to sort bits out. I'll copy my thread over soon.
Do you like the pitch mount? Was going to be one of my next mods, I was looking at the Superpro one, didn't realise the Perrin is actually cheaper so may go for that instead if you like it.
Things are in the pipeline it's just waiting for things to arrive and finding time to sort bits out. I'll copy my thread over soon.
Do you like the pitch mount? Was going to be one of my next mods, I was looking at the Superpro one, didn't realise the Perrin is actually cheaper so may go for that instead if you like it.
Scooby Senior
iTrader: (51)
Joined: Nov 2005
Posts: 20,491
Likes: 2
From: Wherever I park my car, that's my home
Looks great and some choice mods. On word of warning, keep on top of cleaning and lubing the roll bar links - I've just taken mine off and despite a monthly cleaning and luibing regime they are seized solid
Thread Starter
Scooby Regular
iTrader: (1)
Joined: Feb 2007
Posts: 255
Likes: 0
From: chesterfield,derbyshire
Not to bad thanks, i've got a good base, it just needs tweaking to my standards. Had my first proper hoon since i've bought it at the weekend and it was ace
Things are in the pipeline it's just waiting for things to arrive and finding time to sort bits out. I'll copy my thread over soon.
Do you like the pitch mount? Was going to be one of my next mods, I was looking at the Superpro one, didn't realise the Perrin is actually cheaper so may go for that instead if you like it.
Things are in the pipeline it's just waiting for things to arrive and finding time to sort bits out. I'll copy my thread over soon.
Do you like the pitch mount? Was going to be one of my next mods, I was looking at the Superpro one, didn't realise the Perrin is actually cheaper so may go for that instead if you like it.
was very tempted but they wouldnt budge on price of £1400+shipping and i wasnt paying that..
i cant tell any difference with the pitch arm tbh but then i havent driven it hard since fitting.
going to take the intake kit off at the weekend and put the airbox back on with a kn panel filter and put the money towards a remap.
price for the pitch arm was £100.
Last edited by brens.scoob; Jan 13, 2014 at 08:20 PM.
