Hi went to change my bulbs this morning and it's stopped working I've changed the fuse's thinking I've put the bulb in the wrong way but it hasn't fixed it any ideas?

Thanks!

(side light and high beam still work in the unit just not the low beam) driver side is fine.

 

Could simply be the bulb is faulty. Try it in the opposite side and see if it works in there. If not, it's the bulb.

 

As above, suspect the bulb first.

Then look at the connector: is it displaced at all?

 

Their new bulbs and I tried the old ones none are working where as before the old ones was fine I was just changing them to mtecs I'll check the connector in the morning once it's light again

 

Put a volt meter on the plug and tested it seems like theirs no reading couldn't look at it anymore as it started pouring down anyone had this kind of issue with their headlight?

 

What car, what model, what year?

I seem to think that on some newage cars, there's a fuse in the under-bonnet fusebox that produces this effect.

 

ive just had similar exsperience with both mine,went to put them on the other night & nothing gave um a tap & both came back on,havent had a good look yet but did have a problem with indicators as well so im thinking wiring,if anyone knows the best way to go about fixing ideas would be appreciated.its bugeye if helps.
good luck with yours m8.

 

First off, have a look around where you tapped...then examine all connectors. Look for loose wires, loose spades, corrosion, bent pins etc.

 

I was having serious issues with my front lights last year ,,,,,I sanded and cleaned all the connections to every light ,,even had to replace a couple of connections,,,,anyways that cured my nightmare,,,lol