Dave T-S

This has come up several times, the STi lamps use a six wire connector, the WRX has (IIRC) three, and as far as I know nobody has fixed the problem yet.

[Edited by Dave T-S - 5/1/2002 8:20:45 PM]

wRx14pSi

hey guys,,,
can someone please help me out. i need to wire up Sti HID w/autoleveling. i have the switch and the headlight with the HID ballast. i dont have the wiring harness.


I see that the Headlight has a Orange wire harness with a female plug. the switch has 6 wires.. but i dont see any plugs for the 6 wires on the headlight.

Can someone please help me and post a pic or diagram of the wiring from the switch to the headlight (or ballast).

thanks
Will

wRx14pSi

since the headlights (ballast and switch) came off an STi, would it still be the same

i basically need the wiring info btwn the switch and the headlight. does anyone have a diagram or pics or desription in that area?

Dave T-S

Sorry, are you saying you are not fitting the STi lamp units complete, but just the HID from an STi into standard WRX lights?

Does the USA version of the WRX have a lamp levelling control also?